We had the chance to install the SMI Air Force One supplemental braking system part # SM99243 on a 2016 Cadillac SRX and we had filmed the install. I attached a link to this page that shows the install for you to check out. This is designed to be used on motorhomes with air brakes and can also be used on air-over-hydraulic brakes with an additional 1/4" DOT air line (not included). view full answer...
The nicest trunk mounted bike rack we offer that has been confirmed to fit your 2013 Cadillac SRX is the Thule OutWay part # TH45Jv.
What makes this rack far superior to the others is the attachment system. It uses only 2 retractable coated steel cables to attach to the vehicle rather than the 4-6 nylon straps like other racks. This makes installation quick and easy and the cables also last longer.
The cables store inside the rack so there are no loose straps ends to flap around. The... view full answer...
You will need two components to be able to flat tow your vehicle and carry a bike rack. A dual hitch adapter like part # RM-077-4 and an RV approved bike rack like the # S94FR.
The dual hitch adapter will allow the bike rack to sit above the tow bar so that you can carry the bikes without interfering with the tow bar function.
Not all bike racks are designed to handle the rougher ride conditions at the back of an RV or trailer so that is why it is important to pick one that has been designed... view full answer...
We know that the tow package 4-way kit part # 118259 is the correct fit for your 2015 Cadillac SRX as regardless your vehicle has the correct wiring present. I attached an install video for this on a similar SRX as well.
This would work great with the Draw Tite part # 75682 that fits your vehicle as well that you mentioned. This hitch has an easier install and great towing capacities so it's a great choice. view full answer...
We do have the components needed to flat tow your 2014 Cadillac SRX with a tow vehicle that has a trailer hitch at the rear of it. You'd need to start with a base plate kit like the Roadmaster part # RM-523162-4 which is a confirmed fit.
In addition to the base plates, you will also need a compatible tow bar, safety cables, lighting, and supplemental braking to flat tow your vehicle. The most popular compatible tow bar is the Falcon All Terain, # RM-522. This has non-binding arms which... view full answer...
If you have a Class III hitch like the Draw-Tite Max-Frame Trailer Hitch Receiver # 75682 on your 2013 Cadillac SRX I think your best option would be to get a Rola Swinging Enclosed Cargo Carrier # 59109, I can guarantee this carrier would give you enough clearance to open the lift gate of your vehicle. Check out the review video I attached for this product also.
We have not had the chance to install a Thule Transporter Combi Hitch Mounted Enclosed Cargo Carrier # TH665C on an SRX like... view full answer...
When looking for a properly rated weight distribution system, the most important factor to consider is the total tongue weight of your towing setup. This number includes both the loaded tongue weight of the trailer (as if it is loaded and ready for a trip), along with any added cargo weight coming from behind the rear axle of your Cadillac SRX. Ideally, this number will fall somewhere near the middle of the operating range for the system you choose.
The most accurate method for determining... view full answer...
We do have hitch options for your 2010 Cadillac SRX that you can use a bike rack with. I have provided a link to these options for you.
My recommendation would be to choose a Class III trailer hitch, since it has a 2 inch opening and offers more versatility with the hitch mounted bike rack options. The Draw-Tite Hitch # 75682 is a very low profile hitch that tucks up under the vehicle nicely. I have included video that shows the final look and the installation process of this hitch.
I... view full answer...
If you had a factory 4-way that you are looking to replace you would want the Trailer Wiring Harness # 118259 that you referenced, if you do not have a factory 4-way and you are looking to install one you would want a Trailer Wiring Harness # C59496.
I attached installation instructions for both products for you to check out also. view full answer...
The only trailer wiring kits we have for your 2016 Cadillac SRX are ones that are universal style which normally means you'll have to do some splicing. Our best solution would be the 4-way part # 119250KIT which uses sensors instead of splices so you don't have to cut any wires.
Now you'll need to convert this to a 5-way since we don't have a 5-way kit designed specifically for your 2016 Cadillac SRX. For that you'd want the part # 20036 which you'll have to run a wire to the reverse... view full answer...
I personally have not heard of any bike security issues with the Thule EasyFold XT Bike Rack for 2 Electric Bikes part # TH903202. I do however want to note that the maximum bike tube the clamps on the rack will work with is 3-1/8" but so long so long as you are within range there should be no concerns. The clamps will click when they are tight so there is no guesswork.
The hitch tightening mechanism is not a new design either, it's used on several other of their racks and makes it very... view full answer...
Correct, the trailer wiring harness that you need to power trailer lights is not included with any of our trailer hitches. In order to add this I recommend using the Curt Upgraded Circuit Protected Powered Tail Light Converter w Hardwire Kit and Tester - 4-Pole Flat # C59496.
For a trailer hitch, I recommend using the Draw-Tite Max-Frame Trailer Hitch Receiver part # 75682 because it is a bolt-on option that provides a clean look once installed which you can see from the attached photo.... view full answer...
I looked up your 2012 Cadillac SRX and it has a towing capacity of 2,500 lbs so as long as the boat and trailer weigh less than that you'd be fine with this as your tow vehicle.
For a trailer hitch the Curt part # C13002 would be a great option with more capacity than you'd need plus a relatively easy install. Then for trailer wiring all you'd need is the # 118259 for an easy install.
Since you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It... view full answer...
As long as your air brake system is functioning properly on your RV the Brakemaster part # RM-9160 would fit and work well.
The system would not affect the RV's braking performance either. view full answer...
I checked with Thule and they list their Sidekick part # TH78GC as a fit for the factory crossbars of your 2013 Cadillac SRX so it would work well for you. view full answer...
There are trunk mount bike racks listed as a fit for the 2013 Cadillac SRX, see link. However, there is one thing that you will need to look at first. If the vehicle has the plastic trim piece (spoiler) at the top that would interfere with the hooks or cables then you cannot use a trunk mount bike rack. That spoiler is not rated to support the weight of a rack.
If you determine you can use a trunk mount bike rack then I recommend going with the Thule OutWay, # TH56BV. I actually own this... view full answer...
The weight of the etrailer Carrier part # e98873 that you referenced is 58 lbs. So that would put you at a total of 373 lbs between the carrier and the scooter. That would be under the 400 lb capacity of the Draw Tite hitch part # 75682 that you have so it would work just fine. view full answer...
When we installed the Roadmaster base plate kit part # RM-523162-4 on an SRX like your 2015 model we did not find that it was crushing the bumper as the bolt was torqued. I would make sure you are using a torque wrench that is calibrated. view full answer...
The Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System part # SM99209 is designed to be used when you get a new towed vehicle so you don't have to buy a new kit since you will already have the motorhome side installed. For the full kit you will need part # SM99243. The air jumper would simply be reused as well but if you no longer have this then you can use part # SM99666.
The motorhome specific air jumper is only for select models with Spartan or Freightliner chassis... view full answer...