Replacement Center Cap for 16" Aluminum Viking Series Wheels - Gloss Black

Video Transcript for Taskmaster Tires and Wheels CXF105B Review

Speaker 1: We're going to take a look at the replacement Gloss Black Center Cap for the 16 inch Aluminum Viking Series wheels. Now, this part will replace the center cap on your Viking Series Aluminum trailer wheels. It's designed to fit 16 inch diameter, eight lug wheels that have the 4.9 inch diameter pilot hole. These are gloss back color. Now, this is a two piece cap so when you do install this, you just put it in. You take your wheel off your trailer, put this in through the back, press it all the way in and then put your wheel back up on the trailer and it will hold it in place.

Once it's on there, if you do have to access your axle for some reason, there is a two piece cap. There's a little cut out there. If you just stick a screw driver in there and just twist it, it'll release that center section. So once this is on the wheel, you can actually pop out that center section, still have access to your axle if need me. Then when you're done, all you have to do is put it right back in and it's snaps right on tight.Height on this is going to be right at four and a half inches tall and this is for a quality of one center cap.

That should do it for the review of your replacement Gloss Black Center Cap for 16 inch Aluminum Viking Series wheels.