Timbren Rear Suspension Enhancement System
Retail:$316.90
Our Price: $269.36
You Save: $47.54
Confirmed to Fit
2023 Ram 1500
2 Wheel Drive
4 Wheel Drive
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
In-stock alternatives that can ship today
- All Info
- Reviews (6076)
- Q & A (0)
- Photos
2023 Ram 1500 - Timbren Rear Suspension Enhancement System
- Rear Axle Suspension Enhancement
- Jounce-Style Springs
- Extra Heavy Duty
- Timbren
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your Ram 1500. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Features:
- Improves suspension, handling and safety
- Provides additional support as needed, so you always get a smooth, comfortable ride
- Allows the leaf spring ample movement and cushions light loads
- Becomes more rigid as more weight is added
- Increases stability - gives you great performance when you are hauling heavy loads
- Reduces vehicle sag
- Works independently - side to side
- Helps to compensate for off-center loads
- Reduces body roll when you have to swerve or execute a sharp turn
- Acts as shock absorber, taking the brunt of bumps and rough roads
- Extends the life of your vehicle's suspension
Specs:
- Includes 2 Aeon hollow rubber springs, vehicle-specific brackets and hardware for simple installation
- Replaces axle bump stops on frame
- No drilling required
- Capacity: 8,600 lbs
- Do not exceed your vehicle's weight-carrying capacity
- Designed to work with a suspension system that is in good working order
- Limited lifetime warranty - satisfaction guaranteed
Whether you're hauling heavy loads in your bed or cargo area or you're towing a trailer, you will often see the rear of your vehicle sag while the front end rises. In these cases, the rear axle is handling not only the weight of the cargo, but also more of the vehicle's weight. Because less weight is on the front axle, the front tires are making less contact with the road. Overall handling - traction, steering, and braking - is negatively affected. But the resistance from Timbren's Suspension Enhancement System works with your factory suspension to keep your vehicle level and improve your driving experience.
The Timbren system comes with custom-fit brackets that are bolted onto each frame rail above the rear axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits, 1" above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride that you are used to.
Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape increases resistance, stiffening the suspension and keeping your vehicle level.
Each hollow rubber spring works independently to support the driver's side or passenger's side of your vehicle. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when you are hauling off-center loads.
Because the vehicle handles better with the springs, less turbulence will be passed along to the trailer, and this helps to keep the trailer in line. Your driving comfort is further enhanced if the trailer does begin to sway (from a gust of wind or a passing semi), because the movement from the trailer is not transferred to your vehicle. This also works to make the sway subside more quickly.
Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on the factory suspension is also lessened because the rubber springs work to prevent bottoming out on rough roads.
Timbren Suspension Enhancement Compared to the Competition
Timbren's Suspension Enhancement Systems are much easier to install than air springs - there are no air hoses to run, no compressors or gauges to hook up, and no manual adjustments to make. The rubber construction makes Timbren's springs more elastic than similar products constructed of microcellular urethane. And more elasticity allows for a more comfortable ride because the rubber has more travel.
DR1500DQ - Rear Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren
Item # TDR1500DQ
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- Alternate product found
Customer Reviews
Timbren Rear Suspension Enhancement System - TDR1500DQ
Average Customer Rating: 4.7 out of 5 stars (6076 Customer Reviews)
8,600-lb Capacity. These hollow rubber springs sit above the rear axle to help stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.by: Ron L.05/10/2013
2012 Dodge Ram Pickup
I have attached the Timbren product to my 2012 Dodge Ram and am very impressed with the product. etrailer answered my question that I needed to know if the Timbren product would take the squat out of my truck when I hook up my 5th wheel rv. The proof is in the attached pictures I took to share with you and potential customers. Your customer service & product knowledge is outstanding and that is why I am a faithful customer. As far as the installation of the product, I could not find an easier thing to do....It's harder to change a light bulb! Of course your installation video was very informative which made things a lot easier.
Ron L.
5/10/2014
Fantastic....The truck drives like a dream! If and when I hit any potholes or bumps, of course you still feel them, but the control is there with no fish tailing. As far as pulling my 5th wheel, it feels like everything is one unit and floats right along!
Mike L.
12/28/2014
thanks Ron. Great information and you helped me with my decision.
John T.
5/9/2015
Very good illustration and explanation. I have a 5th wheel and am experiencing the squat problem. Question: Is the installation strictly a friction fit or do I have to install a bolt with nut?
Tony O.
5/27/2015
For John T. They are a friction fit, installed mine in less than 15 min. Slight harder ride when unloaded, but they work perfectly for carrying the load of the trailer. Highly recommend.
by: Jack 03/17/2024
I was a sagging mess intil I had the Timbren Rear Suspension added. Now my back end stands tall to the hitch weight of our trailer. These little things really make a big difference.
by: Allen 06/09/2024
2019 Dodge Ram Pickup
Towing 25ft camper with 2019 Ram 1500 4x4, very stable ride.
No sag even without weight distribution hihch.
by: Mark 01/10/2023
Dodge Ram Pickup
Needed to level out the ride when towing an RV with my Ram 1500. The Timbren enhancement system worked perfectly to keep the Ram at an even height front to back rather than the rear pushed down and the nose up when the RV was attached. Also keeping the RV level improved towing handling.
Mark
1/11/2024
After 1 year I can report back that this system has continued to provide the needed improvement to the suspension. I am not seeing the materials deteriorate or break down in any way.
by: Luke08/04/2020
2017 Ram1500
Purchased to help my suspension when pulling around my 2 horse BP trailer. Tested them out the day I installed them with a 16' dump trailer (which is too much trailer for my 1/2 ton). Took a 20 mile ride on the highway and some in rough shape back county roads (to test the ride and to make sure I seated the Timbren in securely). I am super impressed. They preformed as advertised and my truck sits level. The ride is much better with the load and I love how it doesn't affect my ride when not loaded.
I change my own oil and headlights but that is about as far as my mechanic skills go. They were super easy to install. It took me more time to take the tire on and off than to remove and install these. I watched an installation video, used two small blocks of wood to seat them, probably 30 minutes of my time. Would definitely recommend this product.
by: Murph02/13/2024
2017 Ram1500
Actually got these for insurance. I put a full air suspension under my Ram to get a little raised stance. My only fear of that would be an air line failure. If that were to ever happen, these would only allow less than 2" of drop instead of about 5. Love my setup.
by: Doug 06/09/2024
I have purchased Timbrens before and they do the job. Thank you
by: Raymond L05/07/2024
2022 Ram1500
Have used these before on a previous vehicle. E Trailer has the best price and the install videos are also helpful
by: John03/08/2018
2013 Dodge Ram Pickup
These "enhanced" bump-stops have definitely improved the ride quality of my 2013 Ram 1500 quad cab when pulling our 7500 lb. 29 foot travel trailer. The trailer probably has 500+ pounds of food, clothes, kids toys, etc inside as well. The truck bed probably has another 800'ish pounds of equipment in it that compresses the suspension before I even hook the trailer up. With the stock stops the rear suspension hardly moved. After adding the new stops, the rear suspension had travel again and the steering felt less twitchy.
Unloaded truck will hit the new stops only if I hit a pretty harsh bump but it's only noticeable if you're paying attention to it. With a loaded bed (no trailer) hitting the stops is more noticeable but you still need to hit a decent bump for them to touch.
They are very easy to install. Take the time to read the instructions and watch the installation video before you pay someone $50-$75 for a 15-20 minute job.
I would buy them again.
John
3/11/2019
The bump-stops have been excellent. Absolutely worth the money.
by: Ram on 35 s 06/17/2016
Dodge Ram Pickup
I put these on my 14' Ram 1500 that has Mopar 2.5'' lift system. It took me longer to crawl under the truck than it did to pull off stock bump stops and install the rubber shocks. A little bit of soapy water and they slid right on. No need to jack up truck or use of any tools. Pulled 16' bumper pull stock trailer loaded down the same day and was very pleased with the elimination of bounce from the rear. Rams have coils in the rear that make the truck drive like a dream empty, but bouncy as heck pulling a trailer. I recommend this product to anyone with a Ram. Boots sit about 1.5'' above axel so still get same smooth ride when empty and support when you put on a load.
Ram S.
7/7/2017
Still holding strong on my 1500. I have enjoyed the system so much I will be ordering one for my 2017 Ram 2500
by: Harry 04/30/2024
Delivery was fast and installation was fast
by: Joe07/17/2022
Love them had coil bags before one blew out going down the interstate a state away from home ...timbren good coil bag bad highly recommend the Timbren bump stops
Joe
7/18/2023
Great ...love the timbren bump stops...would recommend them to everyone towing with a 1500
by: Nicholas04/26/2021
The fork lift operator couldn't reach far enough to center them over my axle, but it didn't matter, because I installed air lift air springs and the Timbren bump stop spring enhancements. I can't believe how well they performed together. It was only a short trip with this load, and I'd never haul this heavy of a payload in a 1500 unless it was a short trip, but it wouldn't have been an option without these enhancements. The fork lift driver was even impressed. He asked me what I was using. These products kick serious ass! AMAZING!
by: JDG05/07/2017
2013 Suzuki Swift
Purchased these after researching and reading reviews about how these helped others with the same problem I had. They came quickly and were very easy to install. Took less than 30 minutes. The rear end of our 2013 Dodge would sink when we hooked up our Ultra Light trailer. It has a 2" lift on the front. After installing the Timbren Rear Suspension Enhancement System things seemed to level out and we will see how much better it rides this weekend! Customer service was great. Contact about shipping and receiving was swift and easy. Thanks. Pictures attached show the spacing on the rear tire/wheel well before and after. Sturdy strong product. Thank you.
by: S.F.05/20/2018
2011 Dodge Ram Pickup
A heavy workload on a Ram 1500 will cause the truck to squat with just 1 inch of clearance in the wheel-well. The stock suspension is soft and it feels precarious when under load.
I would not say that Ram dropped the ball on their suspension since many of their 1500 customers do not load the truck down to use it to its rated capacity and the soft ride appeals to a large segment of drivers who cannot find it in other trucks. However, it seems that the Timbren bump stops are what should be on the truck if you are not getting a 2500 or 3500 but need to tow and haul.
The Timbren rear enhancement system immediately improves the handling on the Ram 1500 and stands up even when placing it under load. It is almost like buying a whole new truck. I cannot compliment this product enough and I am extremely pleased with how the truck handles both loaded and unloaded. It is not too stiff and it does not feel bumpy like other enhancements might. But it feels sturdy and the truck feels stronger almost right away.
I could have gone with a different distributor for these parts but etrailer.com is more than just a distributor. You can find official etrailer.com videos on most of their products which will give you honest information on their products and explain how to install and use those products. If you have a question, you will get a reply from them with an expert on the subject. They are interested in finding you solutions first and the sales are just a byproduct from their expertise. I did not find these parts cheaper anywhere else, but I still would have gone with etrailer.com even if they cost a little more. I chose etrailer.com because I know I can trust them to get me the good stuff.
by: Josh 07/06/2018
2011 Dodge Ram Pickup
I’m posting review of how the installation went. The installation is so easy, all you need is a jack and 2 short 2x4 boards(for compressing the Timbrens evenly into the socket). I have a 2011 Dodge Ram 4.7l. Pictures below shows my original where rotted and crumbled as soon as I touched them. My truck without from the ground to top of rear fender sits at 38 inches, after my trailer load out on it goes down to just a tad below 37 inches. Major difference, before it would go beyond 35 inches or below.
Pictures #1 show the original yellow rotted ones
Picture #2 is the tinbren installed.
by: Dave R.08/28/2017
2016 Dodge Ram Pickup
To say I'm very happy with this product is an understatement. First off, shipping was fast and the communication from George was top notch. Secondly, installation was as easy as it gets. Find a safe, flat area to jack your truck up by the frame (this creates space between the factory bump stops and the axle) then remove the factory bump stops. You may need a flat head screw driver for this to pry the old bumps stops out (easy)...
insert the new Timbren Suspension System...a 6 inch long 2x4 would be helpful here....safely place the 2x4 atop the axle directly under the Timbren system, then slowly lower the vehicle. The weight of the vehicle will force the Timbren system up into the receiving end and this should complete the install.
It took me longer to dig out my floor jack, cut a small piece of 2x4, then installing the Timbren system.
Lastly, I immediately hooked up my camper a 24' (27' all in) Forest River and instantly saw my 2016 RAM leveled out. I have a 3 hr trip planned in the coming weeks and will offer some feedback on the ride with this new Timbren system in place. Pretty impressed thus far
by: Allen06/23/2019
2019 Ram Rebel 4 x 4 Quad Cab
Ordering was easy and shipment was fast. Although it was a little concerning when I first saw the box. It appeared that baggage handlers at the airport had their hands on it, however the contents were fine. Installation was fast, I used a floor jack and 4x4 under the trailer hitch to lift the truck 3 to 4 inches. It was scary how easy the original bump stops came out. One twist and they were removed. Installation was uneventful (per instructions) there is a decent amount of space under the Rebel which certainly helped. On flat roads I haven't notice any change in ride quality but it is certainly stiffer when going over bumps. I purchased these for aiding in the towing a travel trailer but have not yet used in that capacity.
4 Stars for now and if they work as designed with towing the trailer would give 5 Stars.
by: Alan07/19/2023
Don’t have a good enough idea of if the product will be sufficient for my needs. I’m pulling a 25ft gooseneck trailer to haul my tractor. I’m doing this with a Ram half ton truck and I couldn’t mount airbags as the hitch interferes with there mounting. These were an alternative and I know they are helping but won’t know how much until I do more pulling.
by: Brian Hanson08/08/2019
2019 Ram1500
So far all I can review is the install and super easy I put a floor jack under one side of the frame jacked it up took hardly any effort to pull the original stops out put a little soap and water on it screwed it up in there put a 2 x 4 beneath it drop the suspension down onto the two by four jumped up and down on the rear bumper to make sure it was seated nice and easy to do both sides took me about five minutes of actual work no problem I can't wait to try it out towing these are much higher quality and much larger than the original bump stops I can't believe the factory actually put those in it must be for grocery getters. we plan on using these for planar travel trailer to avoid the bucking bronco effect we have a 2019 Ram 1500 lariat 4 x 4 crew cab with a six-foot-four box
by: Casey11/05/2020
It did exactly what I needed to do. I had really bad chassis roll and soft suspension in the rear of my truck. This eliminated the issue and gave me a stronger ride in the rear.
Casey
11/6/2021
I have been carrying an 80 gallon fuel tank tools and equipment with my pick up. Constant weight on the bump stops. There is some wear between the components of the bump stop but they are still solid.
by: Marc05/06/2024
Great on a smooth road
by: Laurence 08/13/2018
2018 Dodge Ram Pickup
These timbrens are a much better product than I ever dreamed. I had air bags on previous trucks. These work great. Very little cost and installed in 15 minutes on my 2018 Ram. I watched a video and cut 2 blocks in that time too. I tow a job trailer and this truck had more sag from hitch weight than last truck. Rear coil springs.
Solved that issue.
I'd get them again for sure.
by: Gary W.04/01/2017
2012 Dodge Ram Pickup
I have installed the Timbren SES on my 2012 Ram 1500. Total time including removal of OEM bumpers was 45 minutes. I added a preliminary step to the installation procedures. I cleaned the receptacle where the OEM bumper was located to remove the dirt and residue. That made the new parts slide into position easily. I used a small wood block as suggested to ensure complete seating of the new bumpers. They fit perfectly. I have approximately 1.25" of clearance between the bumpers and the rest. Can't wait to get my trailer hooked up to see how they perform.
Excellent service as always from etrailer!
by: DWW10/10/2016
2013 Dodge Ram Pickup
Timbren Pads are easy to install but could use a stop line to verify seating, kinda of a guess. Ram 2013 pads don't bolt on they are press fit to frame. The old pads came out very easy and were dried out from weather? No physical changes in height to PU after installation. Clearance went from 3 (original), to 1 1/2. Pulling a 33 ft trailer and wind rocking PU, also have Sumo spring to install later. I pulled bump pad off without jacking up then jacked frame up, installed pads then set PU down several times with 2 x 4 spacer to set pad. Can't wait to try on road with trailer.
Etrailer shipped very quickly, ordered Tuesday afternoon delivered Saturday. Shipped no rush by me.
25
3904
Show More Reviews
See what our Experts say about this Timbren Vehicle Suspension
- Recommended Timbren Suspension Enhancement 2021 Ram 1500I suggest the Timbren Rear Suspension Enhancement System # TDR1500DQ. You are wanting to provide additional support as needed that always get a smooth, comfortable ride. These will be installed and not require adjustment. The will stabilize when the load causes the suspension to engage and other wise not change your ride quality when not under load. I have attached a help article on the Timbren Suspension Enhancement Systems, please note the link.
view full answer... - Timbren TDR1500DQ Recommendation for a 2014 Ram 1500The part # TDR1500DQ that we carry is the exact same thing as the DR1500DQ. We just add the T to the front of the part number to designate that it is from Timbren. This kit would not fit the ST model 2014 Ram 1500s with or without air suspension. I attached an FAQ on Timbrens for you to check out as well.
view full answer... - Rear Axle Timbren Suspension Enhancement for 2016 Ram 1500A set of Timbren rear axle rubber jounce springs will help to stiffen your rear suspension to offset some of the sag you experience when hitched to your trailer's 500-lb tongue weight. For your 2016 Ram 1500 you can use their rear axle kit # TDR1500DQ that you referenced. An installation video is linked for you. The Timbrens bolt on in place of your factory bump stops and require no drilling. A nice feature of Timbren jounce springs is that when the truck is unloaded by the trailer...
view full answer... - Comparing Timbrens and Air Lift Springs for a 2019 Ram 1500The big deciding factor in comparing these popular suspension enhancement options is usually ride quality and adjustability since both are simple to install. The Air Lift AirLift 1000HD Air Helper Springs part # AL60818HD will provide a smoother, less stiff ride experience for all in the tow vehicle and for that reason it is my recommendation. That ride quality counts for a lot on long trips to your favorite camping locale as well as in day to day use. The only trade off to consider...
view full answer... - Recommended Timbren Springs for 2011 Ram 1500 4x4 Crew CabThe Timbren Rear Suspension Enhancement System # TDRTT1500 is rated for 7000 lbs and is designed for service vehicles which is why they stated heavy duty. They are designed for trucks with service bodies only. The # TDR1500DQ is rated for 8,600 lbs and is a fit for regular truck beds as long as the truck doesn't have a regular cab, so this would be a much better option for your crew cab and non-service bed application so that is my recommendation.
view full answer... - Will Airbags Work on a 2019 Ram 1500 with the B&W Turnoverball Underbed Gooseneck Trailer HitchI do have an option for you but it looks like the side brackets on the B&W Turnoverball Underbed Gooseneck Trailer Hitch part # BWGNRK1319 will interfere with the upper brackets on the Air Lift LoadLifter 5000 Ultimate Air Helper Springs part # AL88375. The best option we have for you as an alternative is the Timbren Rear Suspension Enhancement System part # TDR1500DQ which will actually offer more support than the airbags. These will also be much easier to install and they are completely...
view full answer... - Recommended Rear Timbren Springs for 2019 Ram 1500 2WD Towing Travel Trailer The best Timbren Suspension Kit for your 2019 Ram 1500 2WD is the Rear Springs # TDR1500DQ. These will provide plenty of support for the tongue weight from your new trailer, as they have robust 8,600 pound weight capacity. I'm not sure how tall the factory bump stops are on your Ram, but I can tell you the Timbren springs have an overall height of 5-1/2" (see attached image). Ideally you will maintain 1 to 1-1/2" of clearance between the spring and contact point after installation. I...
view full answer...
- Timbren Suspension System That Fits 2020 Ram 1500I checked with Timbren just now and for your 2020 Ram 1500 the correct fit is the part # TDR1500DQ. This is a carry over from previous year trucks.
view full answer... - Will Timbrens Work With Weight Distribution Hitch on 2019 Ram 1500Yes, when using a weight distribution hitch while towing with your 2019 Ram 1500 adding Timbrens will help with the overall towing experience and sag. The part number you mentioned is not a fit for your truck though, instead, the correct fit will depend on the cab you have: - Crew Cab & Quad Cab: Timbren Rear Suspension Enhancement System # TDR1500DQ - Regular Cab: Timbren Rear Suspension Enhancement System # TDR1500DS
view full answer... - Timbren Suspension Enhancement Fit For 2022 Ram 1500The correct Timbren suspension enhancement fit for your 2022 Ram 1500 will actually depend on the cab style of your truck. The Crew Cab and Quad Cab are different fits than the Regular Cab, so you'll want to choose the right one based on that: - Crew Cab & Quad Cab: Timbren Rear Suspension Enhancement System # TDR1500DQ - Regular Cab: Timbren Rear Suspension Enhancement System # TDR1500DS Timbrens were a really nice choice for your Ram because of how much they will help its handling...
view full answer... - What Is the Correct Timbren Rear Suspension Enhancement System For a 2WD 2019 Ram 1500The Timbren Rear Suspension Enhancement System part # TDRTT1500 that you ordered is for service trucks so it would not have been a good choice for your 2019 Ram 1500 because they would have been engaged pretty much all the time making for a rough ride. The Timbren Rear Suspension Enhancement System part # TDR1500DQ is what you want and these will sit about 1"-1-1/2" away from the contact point so they will only engage when you need them.
view full answer...
- Will Timbren Rear Suspension Enhancement System Fit on 2013 Dodge Ram 1500?The Timbren Rear Suspension Enhancement System, # TDR1500DQ, is a confirmed fit on both the two-wheel-drive and four-wheel-drive versions of the 2013 Dodge Ram 1500, and will work with your vehicle. Coil springs are not an issue with this system, as evidenced by the video I've linked to below, which shows them being installed on a Ram with coil springs. I've also included a link to a video review of this product for you.
view full answer... - Best Rear Suspension Enhancements On A 2011 Dodge Ram 1500The maximum payload capacity of your 2011 Dodge Ram 1500 is determined by factory and cannot be increased. However, with the aid of suspension enhancements you can dramatically improve your vechiles stability, steering, and wear life. Choosing the proper replacement/addition to your vehicle will depend on the features you wish to improve or add. I recommend using the SuperCoils Suspension Coils by SuperSprings. The heavy duty springs such as the SuperCoils Custom Suspension Coils part...
view full answer... - Using A Weight Distribution System With Rear Suspension EnhancementsThe best way to reduce vehicle sag and trailer sway would entail the use of a weight distribution system. A weight distribution system works by distributing the weight on the rear axle of the tow vehicle across the entire platform. This will allow for a level towing surface, in turn providing a safe haul. Using a friction bar design, the downward force applied to the trailer's tongue will minimizes trailer sway in one of two ways. The first being to reduce sway as it is happening and the...
view full answer... - Best Rear Suspension Enhancement System For 2021 Ram 1500 2WD Or 4WDThe Timbren Rear Suspension Enhancement System # TDR1500DQ is exactly what I recommend using on your 2021 Ram 1500. This is a confirmed fit for 2WD and 4WD models. The Timbren # TDR1500DQ is rated at 8,600lbs, which is the highest weight capacity available for your vehicle. I really like this style of suspension enhancement compared to air suspension, mainly because air suspension is typically more expensive and requires much more maintenance and attention. These jounce springs will not...
view full answer... - Where to Install the Timbren Spacer on a 2016 Ram 1500If you take a look at the attached photo, the 1" spacer part # A25723-90AH00 for 3/8" diameter hole or part # TA25723-90AD00 for 1/2" diameter hole will need to be placed in between "2" and "3" when using the Timbren Rear Suspension Enhancement System part # TDR1500DQ on a 2016 Ram 1500. Please note that you will need a longer bolt to install the Timbren springs once the spacer is added. You can aquire this bolt at your local hardware store.
view full answer...
- How to Reduce Vehicle Sag on a 2016 Ram 1500Your 2016 Ram 1500 most likely has coil springs on the rear of the vehicle. Coil springs have an enormous amount of suspension travel but do not offer as much support as a traditional leaf spring. Therefore, a lot of our customers have experienced vehicle sag while towing with their newer Ram pickup trucks. The Timbren Rear Suspension Enhancement System part # TDR1500DQ is an excellent and cost effective way to help combat this issue. The Timbren Rear Suspension Enhancement will replace...
view full answer... - Will SumoSprings Work with B&W Gooseneck Hitch on 2019 Ram 1500The best option for suspension enhancements on a 2019 Ram 1500 with B&W Turnoverball Underbed Gooseneck Trailer Hitch is the Timbren Rear Suspension Enhancement System part # TDR1500DQ since it mounts inside the factory jounce spring cup so there will be no issues with the gooseneck. The SumoSprings Solo Custom Helper Springs are not a good fit as they partially mount outside the jounce spring cups which could get in the way of the gooseneck hitch.
view full answer... - Correct Timbren Rear Suspension Enhancement System for a 2021 Ram 1500 All Cab StylesThe correct Timbren Rear Suspension Enhancement System for a 2021 Ram 1500 crew cab and double cab models is part # TDR1500DQ. The regular cab models use part # TDR1500DS.
view full answer... - Can You Install Fifth Wheel Base Rails Three Inches Forward Of The Rear Axle CenterlineThe Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # RP50066-58 are not a fit with your 2019 Ram 1500 and are actually for Chevy/GMC's. The correct rails for your vehicle are the Reese Quick-Install Custom Outboard Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # RP56018-53. The instructions for these rails will actually have you place these 2-11/16" forward of the rear axle center line so you'll already be close to that 3 inches...
view full answer... - Will Timbren Suspension Enhancement Springs Fit a 2013 Dodge Ram 1500 with Air Ride SuspensionYou will need to look at your rear suspension and determine if the area where the Timbren springs # TDR1500DQ install is clear and matches the pictures on the product page and the video I have linked. Basically, these springs install in place of the factory jounce bumper right next to a coil spring (as seen in the video). That is the area that needs to be clear to install the Timbren springs.
view full answer... - Will the Timbren Rear Suspension Enhancement System Part # TDR1500DQ Fit a Lifted 2014 Ram 1500Yes, you can still use the Timbren Rear Suspension Enhancement System part # TDR1500DQ on your lifted 2014 Ram 1500 you just need to add the Timbren 1" Spacer For Raised Frame Vehicles part # TA25723-90AD00 to compensate for the lift. This spacer will be installed between part TA25723-90AD00 (2) and TA25723-90AD00 (3) in the attached photo. You may or may not need to trim the spacer to fit inside the cup. A longer M10 bolt however will most likely be needed.
view full answer...
- Suspension Enhancement Recommendation for 2011 Dodge DurangoFor your 2011 Dodge Durango we have the SuperSprings part # CSS-1145R which are a confirmed suspension enhancement fit, but there are not Timbrens that will work.
view full answer...
Do you have a question about this Vehicle Suspension?
Info for this part was:
Expert Research:
Jackie C
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video Edited:
Andrew K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Chris R
Written by:
Tyler C
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Clayton O
Video by:
Patrick B
Video by:
Jonathan Y
Installed by:
Cole B
Installed by:
Brent H
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Alex H
Updated by:
Michael B
Updated by:
Noah M
Updated by:
Carrie F
Updated by:
Bethann B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James T.
6/14/2013
Helped make my decision a no brainer....thanks for the pics they sealed the deal.