To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
4,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your Ford Ranger. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
Features:
Specs:
Just like the rear of your vehicle will sag under the weight of a fully loaded bed, the front of your vehicle will sag when under the burden of heavy equipment such as a snowplow. In this case, the front axle is handling not only the weight of the equipment, but also more of the vehicle's weight. Overall vehicle handling - traction, steering, and braking - is negatively affected. But the resistance from Timbren's Suspension Enhancement System works with your factory suspension to keep your vehicle level and improve your driving experience.
The Timbren system comes with custom-fit brackets that are bolted onto each frame rail above your front axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down so that the bottom of each spring touches the axle. Because each spring is making constant contact with the axle, it is always working to cushion and support your factory suspension.
Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape increases resistance, stiffening the suspension and keeping your vehicle level.
Each hollow rubber spring works independently to support the driver's-side or passenger's-side of your vehicle. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when you're carrying off-center loads.
Timbren's Suspension Enhancement System will help raise the front end of your vehicle when you're using heavy equipment like a snowplow. This ensures that your headlight beams will be pointed in the right direction and tire wear will be reduced. If the plow is off-center or has an extension, the springs will automatically compensate for this as well.
Another great feature of the rubber construction is that the springs absorb most of the road shock, creating a smoother, more stable ride overall. Wear and tear on the factory suspension is also lessened because the rubber springs work to prevent bottoming out on rough roads.
Timbren's Suspension Enhancement Systems are much easier to install than air springs - there are no air hoses to run, no compressors or gauges to hook up, and no manual adjustments to make. The rubber construction makes Timbren's springs more elastic than similar products constructed of microcellular urethane. More elasticity allows for a more comfortable ride because the rubber has more travel.
Average Customer Rating: 4.7 out of 5 stars (6090 Customer Reviews)
4,000-lb Capacity. Great for trucks with plows, these front hollow rubber springs help to stabilize and level your vehicle. They also provide a more comfortable ride by absorbing road shock and improving roll stability. Easy to install and use.
When I installed these on my 2015 Nissan frontier sv, the bump stops did not sit square with the top plate, but at an angle I wasn't sure how this would effect travel of the timbrens or the function. Not sure if others have same issue or not. Long story short, this positioning caused excessive stress on the mountingnut location and tore at the bottom right next to the mounting bolt. Timbren was contacted and a replacement was sent free of charge. Excellent customer service- friendly, great attitude to help me out. Performance - handles larger bumps/dips better but smaller ones are felt more. Stiffens up front, notice wind gust influence substantially less. Do feel performance has diminished after a year. Upgrading shocks/coils for lift and better ride. May remove timbrens altogether. Someone with a plow would appreciate these more.
Here is my install on my 2WD Ford Explorer front. Easy job, I don't recommend installing these with lowers suspension as the ride is too harsh, I adjust mine back to stock. Works the way I need them to.
Complete game changer in the way my suspension rides with the plow on the front of the truck. The "V" nose plow used to scrape the ground every time there was a pothole or dip in the road. Now that problem no longer exists.
These are great, but would not line up correctly on the front of my nissan frontier to get an even load. I sent pics to etrailer and talked to a "suspension specialist" and was told that it was normal to have the timbren to be mashed down on one corner rather that and even depression. I called/sent the same pics to timbren and they sent me some tapered shims and longer bolts free of charge, so they would line up to get an even load on the timbrens. They also said that they should have been sent with the shims and longer bolts because this alignment problem was not unusual. Great product, but less than impressed with the decision made by etrailer.
Just got them today, will rate later
Great product would recommend and buy again. Instalation was a snap did it in about 2 hours front and rear.
These work. Smoothed out the ride on my Xterra very nicely.
I know it will be lovely when loaded or the trailer on. However,it rides like a wagon empty with brand new premium shocks and struts empty. Thud thud thud. You really cannot feel the shocks or suspension. Found exact same item plentiful for 60 bucks on eBay after I bought these for 250. I may cut these in half or put air bag on. I do not like the ride empty. No hard feelings. It is a good product maybe just not for me.
Took about 45 minutes to install. But that was 2 trips into the house cause my deep drive sockets were buried. F-350 gasser with 8’ box, Fiberglas cap, 200lb wooden storage drawers and estimated 400lbs in tools. I tow a 14k bumper pull dump that squats the truck. I installed the spacer with the timbrens and it sits on the original axle stop. Ride quality is unknown as I haven’t driven it yet.
Installation was a breeze, removed old bump stops installed Timbrens in about 30 minutes. Haven’t put a load on them yet so I’ll update later. Installed on a 2008 Silverado 2500HD..
About a 1/2 inch difference in gap at the bump stop perch but still within parameters. Truck sits perfect with trailer attached. Haven’t towed yet. After towing if they perform like they should will upgrade to a 5 star. Easy to install, definitely needed 2x4 and jack. 2011 Silverado ext cab with 30 ft Genisis 5th wheel.
Was able to install these with a 15mm flex head ratchet wrench and lifted the rear of the truck to make it easier. 30 minutes to take off 4 nuts and put em back on. 2 minutes assembling the timbrens with the added spacer. I have a f350 with a salter and plow. Loaded with salt the lights shoot up and in the snow ?? it’s like hitting hyper drive and you’re blinded. These helped big time. Very happy so far.
The pro: The longer, heavier bump stops worked great when hauling my mustang home from Chicago. The truck stayed level and handled great.
The con: I had to remove the bump stops for everyday use. They limited my suspension travel causing a stiffer ride.
I am so glad I bought these for my truck. I was able to install them myself using a jack and jackstands. The ride is bit rougher now; but the suspension is totally awesome compared to before. I am able to haul a bit more weight when needed.
Haven’t had it on long, but so far so good. 1999 F350 dually. Bolted up nicely. Total job took 10 minutes. Have hauled two gooseneck loads of hay and truck drives SO much better. Nice and level. Money well spent so far.
very good product ,received just in time and fit perfectly on my GMC savana 2000 .Be sure to clean the two receptacle thats help.
très bon produit , reçu dans les délais et s'ajuste parfaitement . Assurez-vous de nettoyer le receptacle cela facilite l'installation.
The Timbren SES (Bump Stop) replacement for the 3rd Gen Sequoia is a simple and effetive solution to reduce vehicle sag when trailering heavy loads. You definately want to use the included spacer as the pics will show I still had 2 finger clearance above the axle to allow for OEM suspension travel. I pulled my 29ft boat back to back with / without the Timbren bump stops for a ride quality test. Without the bump stops, my 2024 Sequoia rear end was crushed, resulting in a rough ride and poor handling characteristics. With the Timbern bump stops, the rear sag was reduced signifincantly, and the vehicle drove much better. YES, you will feel and occasional bottom out feeling on abrupt G-out dips... But it is no worse than without the Timberns as the stock springs were crushed. My daily drive feels exactly the same as I have the perfect gap between the Timbren bump stop and the axle allowing the OEM suspension to float over road surface without engaging the bump stops. VERDICT: Time will tell with varied passenger loads, speeds, road surface bumps etc., but my initial impression is 7 out of 10. Ultimately, I would prefer air bags, and may install them along with the Timbrens whih I can swap back to the oem bump stop in less than 15 minutes. NOTE: I was able to install the Timbren bump stops without going under the Sequoia. I simply raised the vehicle frame aprox. 4" withoug picking up the rear tire. This gave me adequate room to reach in over the tire and remove the 3 12MM bolts holding the OEM bump stop in place with a 3/8" ratchet and a 4" extension. Then, I put the Timbren bump stop in place and lightly threaded the upper bolt to hold in place. After installing the two lower bolts and smart torquing, then you tighten the top bolt. This allows the bracket to seat against the frame fully as the top bolt hole is slotted to allow movement druing install. Pics will show spacers installed above the bump stops, Installed bump stops unloaded with 2 finger gap, spacers loaded with 750 lbs of tongue weight, and lastly, will show Sequoia stance while loaded. NOTE: The last picture will show my Sequoia loaded WITHOUT the Timbren SES (Bump Stops) and the vehicle is sagging heavily.
The timbrens actually did what they were suppose to do. However, once I starter driving out west I notice the timbrens were riding on the axle which cause the speedometer to jump around depending on the road. I would recommend them if you are hauling or towing a camper or RV. I was going to contact etrailer about maybe removing a spacer for one set however the other set came as one unit. The bottom line is the Timbrens does stabilize your load for safe travels. I will be contacting etrailer soon to assist in correcting the problem...Road trip from Idaho,Colorado,Wyoming,and Utah were beautiful... Thank you etrailer
Installation was easy and straightforward. Haven’t towed with them yet, but the unloaded ride has not at all been negatively affected. In fact unless you hit a big bump you shouldn’t know they are there but they seem to improve handling around turns when there is a shift to either side in the back. It a HD truck so there is some expectation it’s gonna ride like a covered wagon at times. I added these in conjunction with new Billstein shocks and I’m hopeful all that aggravating bouncing or porpoising my fifth wheel does on bad roads and bridge transitions will significantly improve. etrailer was fast with shipping and follow up. I’ll update after towing.
Definitely a must have when towing..stiff without a load but night and day difference while towing my travel trailer, better traction, steering and braking. Easy quick install..only issue I had was with the long bolts they sent with the spacer kit (optional for lift) the bolt diameter was too wide to fit through the holes on the bracket..but a trip to the local hardware store took care of that.
Pros: Cheaper and easier to install than airbags, do the job when load is enough to compress the shock, with added weight or towing, then it stiffens the rear very nicely.
Cons: Doesn't do anything until there is 2-3cm of compressed shock. It sits above the contact point, doesn't touch. Under normal driving, there is no benefit/improved stiffness/anti sway in rear or a leveling of the factory rear sag in a 2022 or newer Toyota Tundra.
If had it to do over, would have put some kind of spacer in between product and upper included bracket, the supplied bolt is long enough to accommodate, to eliminate the gap, and lift the rear 1-2 cm. Should do it anyway, maybe when swapping to summer wheels next month.
Do you have a question about this Vehicle Suspension?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.