Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Make your vehicle more visible and give it a big rig look with this roof light kit that comes with 5 clearance lights. Triple chrome plating offers high-end style. Amber lenses cover white incandescent bulbs. Wiring and hardware included.
Features:
Specs:
Installation
These truck cab lights come with everything you need for an easy installation. The illustrated instructions include a handy template that you can use to drill holes for mounting the lights. And the wiring diagram walks you through every step to make sure everything operates as it should. The light bases conform to both flat and curved surfaces for a tight fit.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Ellen: Hey everyone, I'm Ellen here at etrailer.com. Today, we're taking a look at the Pacer Performance Hi-Five truck cab lights. Now, the idea with these is that they're going to make our vehicle a bit more noticeable when we're out on the road, helps other vehicles to have more visibility for us, and gives us also that big rig look for our vehicle. So, these are going to be the old school, or a little beefier, teardrop shaped lights. So, they have that aerodynamic teardrop there, chrome plated base. So, I think these look pretty nice, pretty slick for any kind of vehicle out there.
The base does have a little bit of a curvature to it, so it goes up and down, or if you put it on the table, you'll notice it rocks, so the ends of that are a little bit lower than the middle. That foam gasket that it has should help to take up that gap, but you'll probably want to put this somewhere as the contour of the roof is coming down to meet your windshield, would be the most likely place to put these.To get these installed, if you didn't already have some lights on your vehicle that you're replacing these with, you will have to do some drilling to get them in place, since they do take two holes to mount the base, and then you'll also want to drill a third hole to run your wiring into your cab. So just a warning about that right upfront. It comes with everything else you see laid out here on the table. So we'll have our lights, we'll have the quick splice connectors so we can make all our electrical connections.
These little spring assemblies are going to go in the light, I'll actually show you how that works here. And the second, we'll get our incandescent bulbs, these screws to secure our mount to the vehicle, some rubber washers so we can take up the gap, and also provide some water protection underneath the head of each of those bolts.These machine screws are going to keep the lens secured onto the bases. Quick splice connectors, screws, and switch for. Those screws are for the switch. The switch is going to turn this on and off, so you don't have to worry about tapping into your wiring.
Now, the way that we're going to get this prepped to actually get it on the vehicle and get everything illuminated. Take one of these little spring assemblies. This is going to provide the tension against your bulb, to keep it in place. So you just drop that down through there.And it'll just slide right in place. That little disc is going to block the spring from getting tangled up and then we'll take our bulb and put that in place.
You can get some LEDs to actually replace these incandescent bulbs if you want. Some people like the look of the incandescence, it's really up to you. The part number for the bulbs that are going to fit this from Pacer will be PP20-102. It's going to be a set of five LED bulbs to work with this kit. Or you can also buy the whole kit with both the incandescents and the LEDs. If you want, it's going to be the exact same thing. It's just going to be part number PP20-106. And again, it's the exact same thing. It just has the addition of those LED lights. So we turn that on, we can see our light comes on there. And turn the lights out in the studio, you going to get an idea of how bright our light is. So, it's not going to be lighting up the night for us, it just makes us more visible to other drivers out on the road.As far as the install beyond getting that in place, like I said, the machine screws do keep the lens in place on our housing for the other screws to mount that in place. And then we have this bulk wire to run between all five lights. One end of that is going to go into the back of our switch. And then this other little wiring piece is going to go to the other prong on our switch. And that's going to be our fuse to protect everything from any shorts or blowouts. Now, if you don't want to, you don't have to use that switch. You can run this into your factories or into your vehicle's factory lighting. So you can have your running lights. Turn on your running lights and then these guys will come on as well. Just some people don't want to make any modifications to their vehicle.It's maybe newer, it's still under warranty. They don't want to avoid that. So, that's the main concern there. Really it's up to you, what you want to do with that. Either way works just fine. Might be a little bit more technical to get in there and find your running light circuit or the wire for your running lights to hook these into, but it's really up to you. If you do decide to do that, you might need a little extra wire and another butt connector or a quick splice, if you want. Although if you're going to make any wiring connections outside the vehicle, I would definitely suggest using a heat shrink butt connector that's going to provide you with a water tight connection for those wires.With these, since they're going to be going most likely into your headline, or they're going to be on the interior of the vehicle, they should work just fine. And since branching everything off of one line with each of these, those quick splices actually work pretty well for that. That's pretty much it, as far as what this is going to look like getting on your vehicle, it is a universal fit. The bulb type again is going to be number 67. As far as the size of our bases here is just shy of eight inches, but seven and seven eights there. The widest point is about two and a half inches. And then about two and a half inches tall.That's going to do it for our look at the Pacer Performance Hi-Five truck cab lights for your vehicle. If you need any other accessories to trick out your vehicle, you can always turn to etrailer.com to find those accessories. Thanks for watching.
Average Customer Rating: 4.7 out of 5 stars (225 Customer Reviews)
Make your vehicle more visible and give it a big rig look with this roof light kit that comes with 5 clearance lights. Triple chrome plating offers high-end style. Amber lenses cover white incandescent bulbs. Wiring and hardware included.Excellent product. Very good price. The replacement marker lights were almost an identical match to the original lights on my 1983 Ford F150. A very easy install. The truck looks great! Purchasing the lights on line with etrailer.com was a snap. I'm very happy so far with the service, product, and follow up. I'll definitely consider etrailer.com for further purchases as I work to restore this pickup. Thank you etrailer.com!!!
Good old school look and not plasic like others I had seen. Fit very well on the curvature of the roof.
They are perfect for my old truck proje ct.
Due to a supposed error in the mail system I never received the shipment of lights. etrailer responded without hesitation and shipped another set of lights. Excellent service and a great product!
e
Yes I received my cab lights today, they look real nice, I'm excited to put them on when weather is permitted , as soon as I get them on my 1997 F - 800 service truck, I will send you a picture of them, also a picture of the original lights too. Thanks.
Nice marker lights. They are going to look great on the roof of my restored 1953 Ford F800 Big Job.
These look like exact replacements for my 68 Chevy truck. Quality is very good. Cannot wait to try them. First appearance is I will not even have to drill a hole!
I've not had time to install them yet. But they are well built and look very cool!
Rod
8/5/2021
Theyre great and look like a factory upgrade, and people always asked where did I get them. They are so good I order another set for my new truck. It take some work if you dont have them already. But still worth it. If you are handy and have some mechanical skills, plus know a little electrical knowledge you can do it. The first thing is the measurement of lights on the roof and their placement.
no problem so far happy with product ,.have/nt installed yet .appears to be in good shape . had to wait a while but that was fine .keep me inform ,.would use this co ,again ,.
Holy . . . . Finally a high quality part with all the assessories included. I would highly recommend this part. My husband was very thrilled with them. They were delivered fast and great service.
Hi I haven't put my lights on my truck yet, maybe this weekend, then I will send you pictures
fairly quick shipping..my truck has never had lights...but have installed them on every truck I've owned ( 4 ), This is my 5th. Everything was in the box. It even came with little washers for the screw heads. I used silicone just in case. I was very skeptical of the supplied ground wires but they all worked!!.. I decided on the old style bulbs this time. Might switch if they don't last then I will go to the LED's. I used a different toggle switch than the one supplied. Really like the set so far. I have never seen a truck like mine with cab lights. Maybe others will try it now?
Look good on the truck, one of the center lights became loose so it was not making great contact and therefore was out. I got it working again, but it was a hassle taking the light off the truck to just spin the light a little bit.
The cab lights I ordered came in a timely manner and they were oem quality!
They look great! Pretty simple install, everything you need is included and the easy splice makes it even easier to wire everything together. They give you 6, so I just used the last one to tap into my headlights and they turn on automatically whenever those are on. LED’s are pretty bright and that’s what I went with, but they also give you the classic bulbs to choose from as well. 4 stars for now just to see how they hold up!
The Pacer Performance High-5 lights on my 1992 Ford F350 are high quality. They fit the original screw holes perfectly. The LED lights are bright. The wire connectors were different, but that was no problem. I cut off the connectors and used crimp-on connectors, then taped the connections securely with electrical tape.
One year on, these lights are holding up very well. Installation was pretty simple, I did have to break out a drill to enlarge the factory holes - I believe the factory lights used sheet metal screws to attach to the top of the cab through the lens and these use a metal stud attached to the light base with a nut that tightens from inside the cab (it's been a year and my memory is fuzzy). Outwards though these lights look completely stock. They sealed well and I've experienced no issues with water leaks. 100% suggest these to anyone wanting to replace or upgrade their stock lights to LED while retained the OE look.
Great product, I replaced existing lights with these. Hole pattern was exactly the same as my old lights. I had two issues not related to the product. My old lights only had one wire through the cab. They had a jumper wire that went from bulb socket to mounting screw for the light.
As far as replacing existing lights goes, this product is great.
For a complaint, the instructions nor video showed me what the little rubber washers were for. Since there were 10 of these I assumed they were for the mounting screws. I used mine for lens cover screws.
I also used silicone under foam pad, on top of foam pad, on mounting screws, and after install was complete I added it at base of lens and around base of light. All not needed but cant hurt to keep water out.
Definitely reccomend this companies products.
Lights and everything arrived quickly, everything needed was in the packaging. The only thing I did differently was I wired the lights into my existing light switch instead of a separate switch, just bought 16 gauge wire from hardware store. I added some t10 LED lights which look awesome at night! During the day LED or incandescent bulbs are not very visible anyway. Overall awesome product!
Good set of lights , actually need another set. Very happy with them
I have ordered many times and have always had great experience!!
After reading not so good reviews on other cab lights I found these and saw nothing but good things about them and when I had them installed I was more than happy with them. I would recommend to anyone wanting to put cab lights on their truck
The lights were purchased as replacement for the existing lights already on the truck, so all the hard work of drilling the holes and running the wiring was already done. What little installation I had to do was fairly easy, and simple. The lights match the originals exactly and you can't tell them apart from the old ones. The package was shipped promptly and arrived undamaged within a few days. Overall I'm extremely pleased with the order and I will be using your company for future purchases and I will definitely recommend your company to other people who need the type of things you supply.
Do you have a question about this Vehicle Light?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Tom B.
9/16/2020
Awesome! The lights look great and work great. Thank you etrailer!!!