Blank Rectangle Trailer Hitch Cover - 2" Hitches - Stainless Steel - Rugged Black
(8 reviews)
Price: $47.95
Blank Rectangle Trailer Hitch Cover - 2" Hitches - Stainless Steel - Rugged Black
Item # AUT-BNK2-RB
Our Price: $47.95
Need help with installation?
Locate installers near me- All Info
- Reviews (8)
- Q & A (0)
- Videos (1)
- Photos
Au-Tomotive Gold Hitch Covers - AUT-BNK2-RB
- Misc Covers
- Plain
- Fits 2 Inch Hitch
- Stainless Steel
- Standard
- Au-Tomotive Gold
- Rectangle
Rectangle hitch cover with rugged black finish protects your receiver from dirt and debris. The durable, rustproof stainless steel sleeve and base prevent corrosion. Fits 2" trailer hitch receivers.
Features:
- Blank, rectangular-shaped hitch cover slides into your receiver to help keep out dirt and deter rust
- Rugged black finish for a clean look on any vehicle
- Durable, rustproof stainless steel sleeve and base
- Hitch pin and clip or hitch lock sold separately
- Made in the USA
Specs:
- Application: 2" x 2" trailer hitch receivers
- Dimensions: 5-1/4" wide x 3" tall
- Limited lifetime warranty
T.BNK2.RB Au-Tomotive Gold Blank Rectangular Trailer Hitch Plug - 2" Hitch - Stainless Steel - Rugged Black Finish
Video of Blank Rectangle Trailer Hitch Cover - 2" Hitches - Stainless Steel - Rugged Black
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of Au-Tomotive Gold Hitch Covers - Misc Covers - AUT-BNK2-RB
Jeff: Hello everybody, this is Jeff from etrailer.com. Today, we're going to take a look at this blank rectangle stainless steel trailer hitch cover for two inch hitches. Now, this is a rectangle hitch cover, has a nice rugged black finish to help protect your hitch receiver from any dirt and debris. Basically, this blank hitch cover will slide into your receiver, helps keep the inside of your hitch receiver clean and allows your ball mount or your hitch accessory to install very easily. It has a nice rugged black finish to it for a clean look on any vehicle. Does use a durable rust-proof stainless steel sleeve and base.When you do install this into your hitch receiver it will require a hitch pin and clip or a hitch lock to secure it.
Now that is not included, those we sell separately. If you do have one, you can use your hitch pin and clip or hitch lock, as long as the pin is a five-eighths inch diameter, that'd be the diameter of the hitch pin hole here. If you notice on this cover, there're three different hitch pin holes drilled, and that allows you to put it in the correct application for a nice tight secure fit in your hitch. This part is made in the USA. A few specs again, it's designed to fit into a two inch by two inch trailer hitch receiver opening.
Dimension on the faceplate itself, the width of it, it's going to be right at five and a quarter inches wide and the height of it is right at three inches tall. But that should do it for the review on the blank rectangle stainless steel trailer hitch cover for two inch hitches.
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
Customer Reviews
Blank Rectangle Trailer Hitch Cover - 2" Hitches - Stainless Steel - Rugged Black - AUT-BNK2-RB
Average Customer Rating: 4.8 out of 5 stars (8 Customer Reviews)
Rectangle hitch cover with rugged black finish protects your receiver from dirt and debris. The durable, rustproof stainless steel sleeve and base prevent corrosion. Fits 2" trailer hitch receivers.by: Bob02/24/2021
It fits perfectly in my 2012 Tahoe receiver and secured by the stainless steel hitch lock. I didn't need it...but I like how it looks. Very sturdy.
by: Morgan07/30/2020
Perfect size and fit. Sits flush to the receiver. I only wish it was made of a heavier gauge steel.
by: Russell 05/01/2023
Great hitch coverage d customer service
by: Alfred 09/04/2020
Nice product, like the way its made and the looks when installed. Only diasappointed in the fact that the last hole did not align with hole in hitch. I carefully reamed the last hole so hitch pin would fit.
I have a GMC 2500HD with 3-1/2" hitch and 2-1/2" fill tube. I did not want to take out a grease covered 2-1/2" fill tube to use this.
by: G07/01/2022
Holding up great, so far! My biggest problem is the rust I get from my actual hitch, just have to keep lubing and things are good!
by: Nadeem09/02/2020
Great and simple shopping, ordering, and receiving process!!!
by: Tim07/22/2021
by: Reed 08/02/2021
8
8
See what our Experts say about this Au-Tomotive Gold Hitch Covers
- Covering an Exposed Hitch on a 2017 Cadillac XT5I did some looking around, but I was unable to find anything we carry to accomplish a quick release of this panel. That being said, this does not mean there is nothing available. We do have an alternate option, however. A hitch cover like the Au-Tomotive Gold Hitch Covers Plain Black Cover # AUT-BNK2-RB, or the Curt Chrome Cover # F-10P would be good options to fill in the gap.
view full answer...
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Written by:
Mark S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.