LED Light for Pop & Lock Power Pop Remote Keyless Entry Kit - 12 Volt - 8 Diode - 2,050 Lumens

See what our Experts say about this Pop and Lock Truck Bed Lights

• Is Pop and Lock Light Kit part # PAL9135 Compatible with PAL9555
  The reason the Pop and Lock light kit part # PAL9135 is recommended with the # PAL9000 is because the # PAL9000 comes with key fobs that have light buttons integrated into them. That said, since the # PAL9555 does use a 12 volt power source it could be used with the # PAL9135 but there wouldn't be a key fob setup.
  view full answer...
• Pop & Lock Keyless Entry Entry For UnderCover Tonneau Cover
  According to Pop & Lock you will want to use their Power Pop Remote Keyless Entry Kit for Hard Tonneau Covers # PAL9000 with your UnderCover tonneau cover. This will replace the standard latches with actuating rotary latches that unlock and open your tonneau when activated. You can get the LED Light for Pop & Lock # PAL9135 to go with the lock system if you would like to have an LED light under the cover when you open the cover.
  view full answer...
  
• Does Pop & Lock Power Pop Remote Keyless Entry Kit PAL9000 Open Tonneau Cover
  Yes, the Pop & Lock Power Pop Remote Keyless Entry Kit # PAL9000 will both unlock and partially open your Undercover hard fiberglass tonneau cover so that the struts can do the rest. The kit includes powered latches that replace your standard ones and also two remote control key fobs and an in-cab button for two ways to operate the lock. Please note that the kit works only on covers with the single handle, but not on covers with dual handles. It should not be wired to work from your factory...
  view full answer...
• Recommended Pop & Lock Power Locking Handle Compatible with ARE CX-Series Cap
  The Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers # PAL9555 is compatible with ARE CX-series cap. This will replace the manual lock on your cap. You may also want to consider the LED Light for Pop & Lock Power Pop Remote Keyless Entry Kit - 12 Volt - 8 Diode - 2,050 Lumens # PAL9135. This will integrate into the system to give you a light that remains lit for 5 minutes so you can get your gear situated.
  view full answer...
• Is Pop & Lock Power Pop Remote Keyless Entry Kit Compatible With Leer 800 Tonneau Cover
  Your Leer 800 tonneau cover is compatible with the Pop & Lock Power Pop Remote Keyless Entry Kit for Hard Tonneau Covers # PAL9000. This is a universal kit that will work with any fiberglass tonneau cover like your Leer 800. That said, to install it you will need to replace both of your cover's existing rotary latches with the new supplied power adaptable rotaries that are included with this kit. If you also want a light, the Pop & Lock Power Pop Remote Keyless Entry Kit for Hard Tonneau...
  view full answer...
• Remote Lock Needed for Undercover Elite LX
  The Pop & Lock Power Pop Remote Keyless Entry Kit for Hard Tonneau Covers # PAL9000 will work with your Undercover Elite LX tonneau cover as long as the handle (not the lock) is no larger then 1-1/4". I reached out to my contact at Pop & Lock to confirm this. If your handle is larger than 1-1/4" then I'm not sure if there are any solutions out there for your specific cover. The kit includes 2 key fobs to activate the locking feature remotely as well as an in-cab button you can install...
  view full answer...
• Wattage Draw of Pop & Lock LED Light # PAL9135
  I spoke with my contact at Pop & Lock and he said that the LED Light # PAL9135 will draw about 1.4 watts at 12V. He also said that it can indeed be used continuously and be manually turned off/on using the switch (either the built-in switch on the light itself or the switch that you mentioned on your setup).
  view full answer...

Do you have a question about this Truck Bed Light?