6-1/2" x 2-1/4" Oval. Touch operated LED dome light with 10 diodes produces white light for interior spaces. LumenX optics creates a solid panel of light. Durable polycarbonate base. Multiple mounting options. 2-Wire pigtail.
Features:
Specs:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to take a look at the LumenX touch activated LED RV dome light with the clear lens. Now this dome light will function as an interior ceiling light on your RV. It is a touch activated light so the light will turn on and off with just a simple press. I didn't center the light, at the end of this video I am going to hook this up to some 12 volt power to show you how that works.Now this is a LumenX optics to create a nice solid panel of light that illuminates the entire lens, and it uses LEDs which make great replacements for incandescent lights, because they'll last 50 times longer, they're more efficient because they'll provide brighter light with less power output, and of course no bulbs to replace, or no brittle filaments to break, and they do give you a lifetime warranty on the LEDs.This light is in a nice, durable white polycarbonate base. The lens is a nice clear lens with 10 white LEDs on it. This is compatible with 12 volt DC systems.
To Mount this, they give you multiple mounting options, you can surface mount it with an available mounting bracket we do sell separately on our website, or you can recess mount it with the available ground that is also sold separately.You can see the two wire pigtail includes the red power wire, the white ground wire with the eyelet on it, and those leads are about 12 inches long. This part is made in the USA. Few specs on it. The light output is 400 lumens, operating voltage, nine volts to 32 volts DC. Want to give you some dimensions and then we'll hook it up to some power.
The overall length from one end to the other, six and a half inches long, width on it is two and a quarter inches wide, the height on it, I'm going to give you two measurements, we're going to measure from here to the very top and then just the light itself. From here to here, it's going to be right about one and seven sixteenths inches tall, and just the light is about one inch tall.Again, we're going to hook up, the red wire goes to our power, and the white wire will ground, and with them both hooked up, go ahead and turn on our 12 volt power. Again, it's a touch activation, so right in the center there, you can see just by pushing in the center, the light comes on, and even with our overhead lights on, you can see how bright this is. I'll go ahead and turn off the overhead lights, and you can see it gives you a nice solid panel of light, that's the LumenX optics they call it. Then again, if you just push it in the center, oops, missed the center, right in the center it'll go off, and again, push it right in the center, it comes right on.
Go ahead and turn back on our overhead lights, and push it right in the center, got to hit it right in the center, there you go, and it goes off.But that should do it for the review on the LumenX touch activated LED RV dome light with the clear lens.
Average Customer Rating: 4.6 out of 5 stars (108 Customer Reviews)
6-1/2" x 2-1/4" Oval. Touch operated LED dome light with 10 diodes produces white light for interior spaces. LumenX optics creates a solid panel of light. Durable polycarbonate base. Multiple mounting options. 2-Wire pigtail.Great light but would need to manually turn them on each time you kill the main switch in the horse trailer. Will reorder the same light but without the touch switch in the middle of the lens. Bad on me for being a poor electrician.
Have not installed yet. Waiting on other equipment before installing.
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
Great product. Did not listen to my salesperson Jesse. I do need the 2 prong adapters.
This is a review of etrailer as the product is 4*. The lights came loose in a box so all 4 lights lenses are scratched. When you spend 16-21$ a light you expect them to handle with care but they don’t.
Purchased these in April, installed in May. Second trip I made with the trailer in July, the lens fell off one light. No damage, it just fell off.
Neither E-trailer, nor Peterson will warranty the light.
I think it's the last time I spend money with either of them.
Exactly what you'd expect. Seems to be a good quality grommet-mount LED light. I used it for a mid-ship marker on a gooseneck.
Two of the three lights I installed randomly turn themselves off. At times they also require multiple “touches” to operate, which can get frustrating.
The light is very bright and is good quality I love it
Good product, nice bright led's
Should last a long time. Great customer service and good website description of product. Etrailer has always been a great company to deal with. Keep up the good work.
perfect timing on the ETA of parts Thanks alot
Very nice looking lights. Disappointed in that I did not watch the video to see that a harness is needed to wire the lights. I will get them with next order though.
Bought 4 tail lights only 1 worked right out of the box - had to work with the other 3 to get them to work
Exactly what we were looking for. I do think the description needs to be more clear as I ordered an extra wire that actual came with the light. Other than that received the product earlier than expected and we were able to finish the job for the customer sooner.
Easy installation. Working perfectly after 1year
I was worried that the backup lights would not be bright enough, but they’re surprisingly bright for only one segment of the light.
Easy instillation and very bright. But you must be very thorough that you have the right sized grommet for the hole in the bed or trailer AND for the light you are using. Not all grommets are the same as with trailers and flat beds so make sure that you double check the hole size both ways of the bed and the light to minimize head aches when you go to install.
I used these to replace the tail lights on my utility trailer. They are bright and because they are LED they will not require any attention. I look forward to many years of reliable service.
Thank you for the prompt service.
These worked great
Perfect replacement for my damaged tail light on our new Timpte 720 aluminum car hauler. Shipping was very quick and packaging was perfect. Thank you for the great service.
Sure would’ve been nice to know the mounting flange and enclosure is plastic.... not one place in the description or video.... disappointed
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.