Pop & Lock Keyless Entry Entry For UnderCover Tonneau Cover

Question

Question:

Undercover doesn’t make as2008gm lock replacement anymore. Need a pop and lock to replace it. Which one will work?

asked by: Bill H

0

Expert Reply:

According to Pop & Lock you will want to use their Power Pop Remote Keyless Entry Kit for Hard Tonneau Covers # PAL9000 with your UnderCover tonneau cover. This will replace the standard latches with actuating rotary latches that unlock and open your tonneau when activated.

You can get the LED Light for Pop & Lock # PAL9135 to go with the lock system if you would like to have an LED light under the cover when you open the cover.

expert reply by: Bud M

0

Customer Image 1
(click to enlarge)

Customer Image 2
(click to enlarge)

Answer 1

The Pop & Lock Power Pop Remote Keyless Entry Kit for Hard Tonneau Covers #PAL9000 will work with your Undercover Elite LX tonneau cover as long as the handle (not the lock) is no larger then 1-1/4". I reached out to my contact at Pop &…

view full answer...

Answer 2

Since the truck is a 2014 Chevy Silverado 1500 the correct Extang Encore lock core replacement is the part #EX28620162-28.

view full answer...

Answer 3

We don't carry the Undercover brand tonneau cover but I can tell you that the lock core on the #EX28620162-28 is roughly 1-1/2" in diameter. If the lock core opening is that diameter this would work well for you.

view full answer...

Answer 4

The 1-1/4" or less you're referring to for the Pop And Lock #PAL9000 refers to the hole size that is left when your handle is removed, which you should be able to get an idea of by looking on the back/inside of the tonneau. However, I spoke…

view full answer...

Answer 5

I went out to the warehouse and measured the Replacement OEM BOLT Lock for Extang EnCore Hard Tonneau Cover 28620192-28 and measured 2" across on the top, but the bottom part that would actually go into the tonneau cover measured 1-3/8" in…

view full answer...

Answer 6

I spoke with my contact at Pop & Lock regarding the Power Locking Handle #PAL9555 for your Elite Under Cover Tonneau Cover. Based on the pictures you provided (thank you!), she stated that a better option is going to be with the Pop & Lock…

view full answer...

Answer 7

Yes, the Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers #PAL9772 can install and be used with your existing tailgate lock you have from Pop and Lock. It ties into the same circuits your tailgate lock ties into so you…

view full answer...

Answer 8

Yes, the Pop & Lock Power Lock Conversion Kit for Truck Caps and Hard Tonneau Covers part #PAL9772 or part #PAL9555 will work on the Leer 100XQ Truck Caps because it uses a cable latching mechanism and the handle is not riveted on.

view full answer...

Answer 9

The number you provided, "7753400" is a patent number which corelates to the Equalizer for E-Z Flex Suspension part #013-144-03. This is for a single equalizer but if you need the entire kit it's the Dexter E-Z Flex Suspension Kit part…

view full answer...

Answer 10

For your enclosed trailer application I have several suggestions for adding interior lighting that you can control directly via a switch. Since your current 4-pole trailer wiring does NOT include a 12V auxiliary power feed that could power inside…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

Because the Retrax PRO MX Tonneau Cover #RT80467 for the 2019 Chevy Silverado 2500 covers the bed rails, you would not be able to use a ladder rack like the Thule TracRac #TH27000XT since that rack requires the use of the bed rails. The only tonneau…

view full answer...