Folding Assist Step - Galvanized Finish
(37 reviews)
Price: $16.91
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Need help with installation?
Locate installers near me- All Info
- Reviews (37)
- Q & A (0)
- Videos (1)
- Photos
Polar Hardware Trailer Steps - PLR900
- Folding Step
- 4-3/4 Inch tall
- Steel
- 4 Inch Wide
- Polar Hardware
- Spring holds assist in open or closed position without rattle
- Intended for use on trucks, truck bodies, trailers, buses, and industrial applications
- Mounting holes: 4" center to center
- Back plate: 4-3/4" tall x 2" wide
- Pad: 2-1/8" deep x 4" wide
- Galvanized finish
900 Polar Hardware Folding Assist Step - Galvanized Steel
Video of Folding Assist Step - Galvanized Finish
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Polar Hardware Enclosed Trailer Parts - Steps - PLR900 Review
Today, we're going to be taking a look at the Polar Hardware Folding Assist. This Assist can be mounted almost anywhere that you need some help getting into and out of the truck or trailer. It's going to be great for buses, work trucks, industrial applications, things along those lines. Really nice design. We've had a few customers that have used this for a couple different purposes. We've had an individual that put it on a dump truck to help gain access to those hard to get or hard to access areas. We also had another individual put it on a trailer to help gain access to the view stack 00:00:34 area of the trailer.
It's a very versatile design. Very easy to mount. Very easy to use. It's going to feature this spring located back here. This holds the Assist in the open or closed position without rattle, so you just flip it down when you're ready to use it. When you're ready to get it a stowed position, just flip it up.
Really nice, easy to use design. The footing area does have a textured surface. This gives the unit great traction, which increases overall safety when using the Assist. It's made from a steel construction with a galvanized finish. Two mount holes on the unit. Mounting hardware's not included.
These mount holes are separated on center by around four inches apart from one another. The back plate has an overall measurement going this direction of pretty close to four and three quarters of an inch. Going this direction, it's going to measure pretty close to two inches wide. The footing area or the pad itself, that measure four inches by about two and one eighth. The depth, overall depth from back to the end of the footing area has a depth of about three and thirteen sixteenths of an inch.
When it's in a stowed position, the depth is only about one and one sixteenth of an inch deep. When it's in a stowed position, it's going to measure about five and a half inches tall. That's going to do it for today's look at the Polar Hardware Folding Assist.
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
Customer Reviews
Folding Assist Step - Galvanized Finish - PLR900
Average Customer Rating: 4.6 out of 5 stars (37 Customer Reviews)
by: Rex07/26/2022
I bought this for a boat trailer for mounting on the frame to climb over the side of the boat when it is on the trailer. I mounted it using 3/8x3-5/8x4 inch square U Bolts. 5/16 dia bolts would be ideal if available. I reamed the holes slightly so 3/8 dia bolt would fit. The step is well made and looks good. Dimensions on the website are accurate.
by: Wilton12/22/2017
Placed order on a Saturday and item was packed same day. Received on following Wednesday. Same item was on another well known site for $[XX] each plus shipping. I got two steps [that were less expensive than a competitor] plus FAST Shipping. They even tried to answer my question on how to properly mount the item on my Dog Box. I did not even know what thickness the alum tubing was I was mounting it too. My wife's cousin made it for me and he died a few years back. Attached are pictures of the finished job. I have bad knees and it is hard for me to get up and down. I even have a step that drops from under the bumper to step up on the tailgate.
by: Ray07/20/2022
way too small. I weigh about 220 and certainly wouldn't trust it to stand on. If I had seen it on a store shelf I would have laughed at it and walked away. Planning to use it as a hand hold to help climb into my attic. I had bought a large set at another vendor and thought this has the same, I was wrong. I'd return it but the shipping is about the cost of the item.
by: Mike C.11/08/2019
I saw a photo where someone used your product as a step into a Jeep. I thought what a great idea! So I did it too! I had them powder coated black!
by: John S.01/18/2020
Good and sturdy. Using it as a step to reach high shelves in my closet. Required beefing up the wooden panel where it mounts. Now need to make a "cowcatcher" to fold it up as the door closes.
by: Gary 12/30/2019
I used 5 of these steps to create access to my 06 Sprinter roof rack. They have worked out very well. I mounted 3 on the passenger side rear door near the hinge side starting low and 2 on the passenger side rear quarter along the body panel seam for the upper steps.
Gary S.
12/31/2020
The steps continue to be a great solution to access my roof rack. I was concerned about rust on the pivot pin but that has not happened.
by: Shawn 05/31/2023
Great product, we use these steps multiple times a day and they have held up extremely well.
by: Raymond 06/23/2023
Looks solid
by: leVieux04/07/2021
Step is just what we needed, fair price, prompt delivery. Looks strong, well Galvanized. Will install soon.
Rick F.
5/3/2022
It works well when needed and folds out-of-the-way when not in use. So far, so good !
by: Greg 11/08/2021
Great product, exactly what I wanted !! Great place to shop !!
Greg
11/9/2022
Excellent, my wife & I both like the step, it makes it a lot easier to get into our jeep Rubicon .!! Great so far !!
by: Richard05/29/2016
Product is great for a easy step up to the gooseneck of the trailer.
by: Linda 06/19/2021
These worked great on a Ford F250 work truck. The bumper sits too high and this helps to get in and out of the bed.
by: Harold C.02/11/2016
Put on my dump truck, works great. Can step on it to check in the bed without climbing down from the truck and back up.
by: Robert12/22/2017
Product was as I expected and in new condition. I have purchased several items from etrailer, and have always been satisfied with their products and delivery. I recommend them.
by: Glen K.08/28/2018
Very solid step. Using on side of dump truck. Will work perfectly!
by: Kenneth12/07/2021
These steps are really good for outdoor use. I use them in several different applications for my customers.
by: Grayson10/15/2022
Looks to be of good quality materiel and nicely made.
by: Donald 05/06/2021
Great product to use as a step on my dock to get into the pontoon.
by: Gem06/12/2022
Smaller than I thought, but my fault for not reading the measurements.
by: Kevin 02/13/2024
by: Gail 12/31/2020
Heavy duty. Perfect for our needs. Fast shipping
by: Debby Rasco07/27/2016
product is as agreed have not installed yet but quick delivery and I am Happy thanks
by: Kevin 09/20/2023
by: Raymond H02/28/2017
Haven't installed it yet but I'm sure it will work great
by: Robert12/17/2018
just what I needed
25
37
Show More Reviews
See what our Experts say about this Polar Hardware Trailer Steps
- Mounting Dimensions For Folding Step Assist # PLR900Per the manufacturer The Folding Assist Step # PLR900 has a mounting hole dimension of 4 inches center on center.
view full answer... - Weight Rating On Polar Folding Assist StepI contacted Polar and they were reluctant to give me a weight rating for the step part # PLR900 however they were adamant about the fact that it can handle 210 lbs of weight. The step is designed to be used on industrial equipment so it is made of a heavy duty steel. The backing plate measures 2 inches thick.
view full answer... - Is the HitchMate Boat Trailer Step HE4036 Available in Aluminum or a Galvanized Finish?The HitchMate Boat Trailer Step # HE4036 does only come as powder coated steel. This will offer corrosion resistance, but it will also need to be kept clean to keep this up. We do have a galvanized step available, but it is a different design. The Polar Hardware Folding Assist Step # PLR900 will have a galvanized finish and has multiple applications. The mounting holes will measure 4 inches from center to center though, so depending on how tall your frame is you may need to come up with...
view full answer...
Do you have a question about this Trailer Step?
Info for this part was:
Installed by:
Cole B
Updated by:
Wilson B
Written by:
Amanda M
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Ray
7/21/2023
not working out