Timbren Trailer Suspension Enhancement System for Underslung Axles - 5,000 lbs

Timbren Trailer Leaf Spring Suspension - T92MR

Designed for trailers with underslung axles that have a 2-3/8" to 3" diameter. Hollow rubber springs sit above the axle, helping to stabilize and level the trailer while absorbing road shock and reducing sway.

Features:

• Improves suspension, handling and safety
• Provides additional support as needed so you always have a smooth, comfortable ride
  • Allows the leaf spring ample movement while cushioning light loads
  • Becomes more rigid as more weight is added
    • Increases stability - providing great performance while hauling heavy loads
    • Raises trailer ride height
• Works independently - side-to-side
  • Helps compensate for off-center loads
  • Reduces body roll when swerving and turning corners
  • Works to eliminate trailer sway
• Acts as shock absorbers, taking the brunt of bumps and rough roads
  • Extends the life of your trailer's suspension

Specs:

• Application: underslung axle trailer with a 2-3/8" - 3" diameter axle
  • For tandem axle applications, use 2 kits
  • Designed to work with a suspension system that is in good working order
• 2 Hollow rubber springs, mounting brackets and hardware are included
  • Installs with existing U-bolts
  • Secures to leaf springs 1-3/4", 2", or 2-1/4" wide
• Capacity: 5,000 lbs
  • Do not exceed the trailer's weight-carrying capacity
• Spring Dimensions: 5-1/4" tall
• Limited lifetime warranty - satisfaction guarantee

The resistance from Timbren's Suspension Enhancement System works with the trailer's suspension to keep it level, which improves driving performance for your vehicle. When hauling heavy loads, you will often see the rear of the vehicle sag, while the front end raises up. In this case, the rear axle is handling not only the weight of the cargo, but more of the vehicle's weight as well. Since less weight is on the front axle, the front tires are making significantly less contact with the road, reducing traction, which decreases the vehicle's steering and stopping performance.

The Timbren system has a custom bracket that will be bolted onto the trailer frame above the axle. Hollow rubber springs are bolted to the bottom of the bracket and hang down to where the bottom of the spring sits one inch above the axle. The inch of clearance allows the existing factory suspension to operate normally under light loads and standard terrain, ensuring the smooth, comfortable ride you are used to.

Timbren Suspension Enhancement Systems are designed to work progressively. When the hollow rubber springs are compressed, the convoluted design causes them to quickly collapse along the folds. Once the folds are compacted, the stacked barrel shape provides increased resistance, stiffening the suspension and keeping the trailer level.

Each hollow rubber spring works independently to support the driver's or passenger's side of the trailer. This is helpful when you swerve or make sharp turns. Each spring is activated when it is needed, so body roll is greatly reduced. The independent action also works well when hauling off-center loads.

Timbren Suspension systems help compensate for all of the probable causes of trailer sway - from unbalanced loads to gusts of wind from passing vehicles. Installing Timbren will make your trailer track better behind your vehicle and provide a safer more comfortable towing experience.

When hauling heavy loads, the resistance from Timbren's hollow rubber springs will work with the trailer's suspension to raise the trailer's ride height. This is will take additional strain off of the hitch components and help the trailer ride easier.

TRABL - Trailer Suspension Enhancement System with Aeon Hollow Rubber Springs by Timbren

Installation Details