Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Fixed leg jack with heavy-duty footplate base and swivel mount offers superior side-load strength in a compact package. Jack has 12-13/16" retracted height and measure 10-1/4" from mounting bracket to top, excluding handle. Crank included.
Features:
Specs:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today we're going to be taking a look at part number BD190706. This is the Bulldog square swivel jack with the round pipe mount. It's going to have superior side load capacity when compared to round jacks. The outer and the inner tubes are going to overlap for additional strength when the jack is going to be fully extended. A nice, square design on the jack itself, it's going to provide additional support for side loading. It also features a nice compact design, so this is going to be perfect for tight applications.
This is a tubular swivel design that's going to let you swing the jack up for travel and down for use. It has the included pull pin that's going to hold the jack in place in either of those positions. The pipe mount here is going to have an outer diameter, outside to outside, of three inches, inside to inside of two and a half inches. This gets welded onto the frame of your trailer, and then this portion right here is going to slide into the portion that's welded onto the trailer. Then it's going to allow the jack to swivel inside of that mount.
Once you have it in the position you want, all you got to do is put the pin in there, secures it in place to whatever position, whether it's the up position for travel or the down position for use. That's going to secure it firmly in place. It's held on with a nice little chain. That way when you take it out you don't ever have to worry about laying it down and potentially losing it. This is made from a durable, long-lasting construction. It's going to feature a weather-resistant coating on the outer tube and a zinc plated finish on the inner tube.
The outer tube, here, again, square design, that's going to measure two and a half inches by two and a half inches. Inner tube's going to measure two and one-quarter by two and one-quarter. Now, another neat feature of this jack is it has a screw-nut stop that's going to prevent damage to the screw and/or the nut when the jack is fully extended. It's going to feature a top-wind handle for a smooth, ergonomic design, allows for easier cranking. It's going to include a bushing here in the top.
Excuse me, it's going to include a bushing here in the top of the cap as well as an eagle claw grip. If we take a measurement of the handle radius, measuring from the center of the handle to the center of where it mounts, it's going to be about nine inches. The foot plate is also welded on, so that's included. If we take a measurement of that, it's going to measure six inches by eight inches. This unit is ASABE compliant. We're going to go over the bracket height measurements. That's just measuring from the center of the tube to the ground. That measurement is going to be about twelve and three-sixteenths of an inch when it's fully retracted, which is the position I have it in now. When it's fully extended, that's going to increase to about twenty-seven and three-sixteenths of an inch, which is going to give this jack an overall lift or travel of fifteen inches. Now, if we measure the clearance that we have from the center of the bracket to the top of the jack, not including the handle, that's going to be about ten and one-quarter of an inch. This jack offers a lift capacity of 5,000 pounds with a static capacity of 8,000 pounds. Again, it is a weld-on application. You can see how easily the jack operates. Turn it clockwise to raise it and then counterclockwise to bring it back down. When the handle's not in use, it can be rotated over for a nice stowed position or a nice storage option there. That's going to do it for our review of part number BD190706. This is the Bulldog square swivel jack with the round pipe mount. .
Average Customer Rating: 4.9 out of 5 stars (45 Customer Reviews)
Fixed leg jack with heavy-duty footplate base and swivel mount offers superior side-load strength in a compact package. Jack has 12-13/16" retracted height and measure 10-1/4" from mounting bracket to top, excluding handle. Crank included.Amazing product, we are converting all our trailer jacks to this. Ordered more the moment these were received.
I was not happy that I could not purchase these items locally, in an attempt to support local businesses. All local stores that carry trailer equipment could order the jack and hitch, but it would take over a week to be in my hands. Ordering from etrailer was easy and I had the items in 4 days. The prices were very reasonable as well. Overall, I think I came out good on this purchase.
These jackstands are excellent very durable turn off power and always work I love them I recommend it
Heavy duty jack and easy to maintain with zerk fitting.
Good product and excellent quality. Etrailer has great service and selections.
Very heavy duty. Product was as advertised and expected. I would order from them again.
Good stuff
I wanted a specific Bulldog jack and of course ETrailer had it in stock. Bulldog makes a great product and I like the weld on, swing away option.
We needed a weld on solution for this trailer. As always etrailer folks are willing and ready to help when needed. It’s been a year and we use this trailer for camping and general hauling. If you want a weld on solution for a jack this is it! Highly recommended. Fast shipping.
Very well built and heavy duty. Used for a replacement of an older Bulldog that sat outside for 10+ years and rusted. Love the addition of the grease zerk near the top of the sleeve.
Only minor complaint is that the packaging for shipping was not great. I recieved the jack with the top of the sleeve/handle sticking out of the box. It had punched right through the cardboard. Ended up being no issue, but I could easily see how that would have resulted in a bent handle.
Works great, very well built. I’m using it on my John Deere 10’ CX15 rotary cutter which is in the neighborhood of 2,000-2,100 pounds of tongue weight and it lifts it with ease and is very stable. Also has the perfect range of height.
The jack was chosen because of it's dimensions that would fit my application and lift rating. I just recently installed it and the fit was just what I needed. The paint on the unit is not sufficient and did require redoing. If the pipe mount could incorporate a security attachment it would be much improved. I expect that it will provide a longer service life than the jack it replaced.
Great product. Very pleased with how fast it arrived and the generosity of discounted shipping. Great quality.
Mounted on front of 12 ft. dump trailer, works great. Jack can be removed while trailer is in use.
Application is on a 24' utility trailer used for equipment hauling & general purpose, including kids hay rides. A replacement and upgrade for a jack which was stolen. This jack is very stable and has strength for heavy loads when trailer is not attached to tow truck. The price at etrailer.com was very favorable even when compared to lesser quality jacks.
I ordered this jack to replace my tongue mounted jack because it would sometimes hit the ground going over uneven terrain. When I received this jack I didn't realize the top wind would hit my spare tire so I contacted etrailer.com and they exchanged the jack fro a side wind. Great customer service.
Good Quality
Used this jack for my John Deere CX15 rotary cutter. Works great, lifts the front of the cutter up with ease even though it’s over 2,000 pounds of tongue weight IIRC. And plenty of range on the height for this application also.
My name is David Oley and I a tree removal business and the jack on my stump grinder broke recently and I refuse to pay the manufacture a 160.00 for a jack.I found the same jack here for half the price and quality is just as good as the manufactures.Thanks etrailer for helping me out.
arrived on time and in good order, works like a BullDog should, Great product.
I absolutely love etrailer! The products on their webpage are described and explained so clearly it makes the choise easy! I love the videos that are connected to each product, it really helps me with my visual aid and making an informed decision.
Ordering simple and delivery is always on time!
trailer jack was what i expected - used bulldog before and have they have fallen into my favor. a sturdy, reliable product for my 7000lb GVW trailer.
etrailer site was easy to use and their order confirmation, delivery, and follow up very prompt.
Do you have a question about this Trailer Jack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
1/13/2023
I am sorry to see that your experience with us was less then ideal. I am happy to help you in any way that I can.