etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
Item # e98856
Retail:$156.90
Our Price: $121.58
You Save: $35.32
Confirmed to Fit
2012 Jeep Wrangler
with standard factory bumper
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (436)
- Q & A (0)
- Photos
- Used (1)
2012 Jeep Wrangler - etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2"
- Class III
- 2 Inch Hitch
- 5000
- No Cross Tube
- 500
- etrailer
- 5000 lbs WD GTW
- 500 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch bolts onto your Jeep Wrangler's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Durable matte finish resists rust and creates a rugged look.
Features:
- Custom-fit trailer hitch lets you tow a trailer or carry a bike rack or cargo carrier with your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer
- Matte black powder coat finish over protective base coat offers superior rust resistance
- Ball mount, pin and clip sold separately
- Made in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2" x 2"
- Overall length of receiver tube: 9"
- Rating: Class III
- Maximum gross trailer weight: 5,000 lbs
- Maximum GTW when used with weight distribution: 5,000 lbs
- Maximum tongue weight: 500 lbs
- Maximum TW when used with weight distribution: 500 lbs
- Maximum gross trailer weight: 5,000 lbs
- Limited lifetime warranty
Rugged, Matte Black Finish
The sturdy steel construction is protected with a matte black finish for added durability. This unique powder coating gives etrailer hitches a carbide-like appearance and a rugged look that sets them apart from traditional glossy hitches. In addition to being rust and corrosion resistant, the tough matte coating hides dirt, scuffs, and dings better than a glossy finish.
etrailer Technical Support
At etrailer we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
e98856 etrailer Class 3 Trailer Hitch Receiver - 2" - Matte Black Carbide
Replaces e98835
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
5,000 lbs.
Tongue Weight (TW):
500 lbs.
Tech Tip
Hitch receiver tube is longer than the other etrailer hitches and will extend farther out from the vehicle so accessories such as bike racks and cargo carriers extend past the spare tire. No drilling required for installation , Exhaust must be temporarily lowered for installation , Tow hooks, if present, will be permanently removed , Any obstructions on the cross member, such as excess welding, will need to be removed for installation
Complete Towing Package for 2012 Jeep Wrangler
Retail:$239.99
Package Price:$194.53
2012 Jeep Wrangler Owners Who Purchased This Trailer Hitch Also Bought...
Popular Wrangler Trailer Hitch Accessories
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" - e98856
Average Customer Rating: 4.9 out of 5 stars (436 Customer Reviews)
This fully welded trailer hitch bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Durable matte finish resists rust and creates a rugged look.by: Ian06/04/2024
2021 JeepWrangler
Accompanying instructions a little vague... in particular not mentioned that the two existing Jeep bolts to be re-used have captive nuts, so no amount of grunt work with a wrench will shift them - not entirely obvious as you lay on the ground under the Jeep trying to loosen. Also, Jeep bolt heads are 18mm and the two supplied bolt heads are 3/4", both requiring shallow sockets when using a torque wrench due to proximity of Jeep exhaust silencer (assuming this is not dropped to provide more working space). Some filing of the receiver holes needed to get Jeep bolts back through. Once installed, feels secure and looks good.
by: Thomas02/23/2022
Excellent product, poor installation instructions. I have included the photo of the part that had to be removed before I could install the hitch - despite emailing prior to purchase to ensure an exact fit, there was no instruction to remove that part. Once that part was removed, fit was perfect. No need to temporarily remove exhaust, despite recommendation in directions. The vehicle is brand new, Rubicon 4xe. I will only use the hitch for a bike or luggage carrier, but it is heavy duty and would handle more that the Jeeps towing capacity
Thomas M.
2/24/2023
Product is working great - heavy duty enough to tow a 3,500 pound little camper. Towing limitation is the Jeep, not the hitch!
by: Rich 04/10/2024
2021 Ford F-150
The hitch is well-made and fits perfectly. I needed to drop the muffler to complete the installation as the bolts could not be fed into the holes. The videos mention that that probably wouldn't be necessary. I needed to find a video on YouTube showing how to drop the muffler. This install was made a little tougher crawling under the jeep and squeezing into the tight spaces. I used a motorcycle jack to hold the hitch in place while I got the bolts in. If you have access to a lift the installation would be a breeze. The install took less than an hour even with the extra steps.
by: Ronald11/12/2023
2022 Jeep Wrangler Unlimited
I read the reviews paying close attention to the fact that I had a Jeep Wrangler with the tire on the rear. I chose this one because it said it would fit and allow bike racks with the tire in place. Item arrived and I easily installed it with no effort at all. Nothing had to be removed unlike the instructions. The picture below is minutes after installation. My Thule 4-bike rack would not slide into place as it was not long enough of a mount which is contrary to what the description said. I reached out to etrailer and was told that I could purchase an extender for $XX dollars more than what I bought the mount for. I contacted a local trailer supply store that had an extender for a lot less money and now it works......
by: Mike 03/25/2023
Jeep
You can only use two new bolt sets that come with kit, 2020 Jeep Sahara has extra plate that bolts need to be removed and reused along with two new bolts sets.
Mike
3/26/2024
Working perfect
by: Paul 06/22/2024
Love the hitch. It was a tad snug when installing but is a rock solid product. I'm very happy!
by: Roger10/11/2019
2018 Jeep JK Wrangler
I needed a hitch receiver that would fit my 2018 Jeep Wrangler JK and extend far enough that I could use by Kuat Sherpa 2.0 platform bike rack and clear the spare tire. This hitch worked perfectly and was an easy install.
Roger
10/12/2020
Exactly what I needed. I have used on many times and could not be more pleased with the hitch
by: Harold 04/17/2024
Etrailer is very reliable. I have had nothing but good service and our products always arrive timely and when expected. I highly recommend e trailer to anyone looking for great service.
by: Scott G.01/20/2024
I wish I could provide a product review. But I was unable to install it given the mounting holes didn’t line up and are out of tolerance to my Jeep mounting holes. I tried to physically return it given I’m only a short drive away and I was told no in-person returns. And it made no sense for me to ship it back when I’m only 30min away. Crazy. About the most inefficient process I’ve ever heard. So, it sits in my garage……
by: Hugh 05/25/2024
Hitch arrived in a few days. Looks great. Not installed yet.
by: Andrew 04/21/2024
Super easy to install. Looking forward to ordering additional accessories to maximize this product.
by: Dallas 02/08/2024
2019 JeepWrangler
Great fit on our 2023 Wrangler Rubicon. I was able to perform the install without removing the exhaust like stated in the instructions.
by: Doug 01/04/2024
JeepWrangler
Quality product, very well made and fit perfectly on my 2021 Wrangler JL frame. Prompt delivery with shipping updates along the way. The parts bag was ripped open (during shipping I presume) but all the parts were in the box rattling around. The box itself was in perfect condition thank goodness!
by: Frank08/10/2019
2018 Jeep JL Wrangler Unlimited
Once I figured out the alignment of the bolts it was simple. The 2018 JL has two bolts and a bracket that are already there. U loosen, slide the hitch between the bracket. I reused the 2 stock bolts and used the 2 new bolts. Looks great! Total time for install about 40 mins with torque n the bolts. Havent used it yet but will let u know if there are any issues.
Victoria B.
8/14/2019
Some models will have existing hardware and a spacer installed in the hitch installation location. If your Jeep has these parts, you will want to remove the bolts and spacer, keeping the bolts for re-installation with the trailer hitch.
by: Glenn 01/27/2024
2020 JeepWrangler
Have not installed it yet but looks to be a perfect fit. Very nice finish, matches the stock steel bumpers nicely.
by: Gary04/16/2022
2021 JeepWrangler
Overall excellent product. Heavy duty, nicely finished and top-notch hardware. Instructions need updating. There are supposed to be 4-holes in the Jeep frame to mount this hitch. There are, but 2-are used by the bumper plate. Had to figure it out myself. Removed the 2-bolts, spread the plate away from the frame to allow the hitch to slide up over the frame. After that, no problem.
Gary
4/17/2023
Great. No issues. Working as intended.
by: Kathleen03/26/2020
Received the hitch in the morning, we installed it that afternoon. After watching an installation video from the etrailer website, my husband installed the hitch on my 2020 Jeep Wrangler JLU. It took him about an hour to complete. We bought the extended length hitch. The product fit perfectly and no need to remove the muffler.
by: Mark of KI07/29/2019
Like mentioned in previous posts, on my 2019 Moab, the two outer bolt holes have an L bracket attached already. The nuts are welded onto that bracket so no need to put a wrench on those. Slip the hitch between the steel and that bracket using the same two bolts (18mm) you just removed as well as two bolts and nuts supplied (3/4”) for the inner holes. Once again as mentioned by others, I didn’t need to move the muffler and the rubber mallet worked great to tap the hitch to line everything up perfectly.
Love the matte finish. Great quality.
by: Chris05/29/2023
Nice hitch. the install took about 30 mins on a 21 Sahara including getting tools out and putting them back.
The instructions are not overly clear about the bumper support that needs to be slid out so that the hitch can be install behind it. the instructions should read If this model has a bumper support installed where this hitch is to be installed. remove and reuse the factory 18mm bolts. Loosen the two 10mm bolts to slide the bracket forward enough to install the hitch, re-tighten once the hitch is installed. It should also show a diagram or picture in the instructions.
There is absolutely no need to mess with the exhaust - there is plenty of room to do the install with the exhaust in place.
Past the instructions - this is a nice hitch. the paint seems very nice and it seems to be made well. the welds look good and the 1/4"plate frame seems very stout. Its nice you don't have to remove or cut anything to do this install. Its also great to see quality SAE hardware vs the metric junk including in so many things now a days. This seems like a quality hitch.
by: Dawn08/07/2022
Works great with my 2021 Wrangler Sport. Gives decent clearance past the spare tire. Some rust spots already after one year that need to be touched up, but that’s what salted roads do to stuff in the northern states. Of course, I added the flag plug for extra bumper appeal.
by: Robert09/12/2020
2020 Jeep Wrangler Unlimited
Great trailer hitch. Easy to install. The video on line was a great help as it tells you how to install and what you might run into as having to clear out the holes that the bolts run through. only added a few minutes to the job. Shipping was fast.
by: Ken 05/22/2024
Easy to install. Went on in 20 minutes.
by: Steve01/08/2021
Yamaha
This hitch works great combined with the MaxxHaul 70101. Clears the spare and my Yamaha TW 200 fits nicely. Those are also the recommended tie downs
by: Tess08/13/2023
Exactly what we wanted, hitch was very easy to put on. Very quick arrival. We ordered a wrong harness snd customer service was very quick and courteous to help us get a return label.
Would highly recommend this company.
25
436
Show More Reviews
See what our Experts say about this etrailer Trailer Hitch
- Trailer Hitch Recommendation for 2012 Jeep Wrangler to Carry Bike RackThe best hitch solution for your 2012 Jeep Wrangler to carry a bike rack would be the etrailer part # e98856 as it has the longest hitch tube which allows bike racks to have the best clearance past the rear spare. Based on the dimensions of the Backstage part # RKY10002 and dimensions we've taken when we've installed the hitch you would have clearance to use this rack.
view full answer... - Do I Need a Bike Frame Adapter Bar when Using the RV Rider with Step-Thru Electric Bikes?I have a great solution for you. Even though the independently-adjusting cradles on the Yakima OnRamp # Y36FR eliminate the need of a bike frame adapter bar, the OnRamp is not safe to use on the back of a flat-towed vehicle. I I confirmed with the engineers at Yakima that the OnRamp cannot withstand the extra torque/forces exerted on the rack during transport on your 2019 Jeep Wrangler. Even if the OnRamp was approved, the 5-inch distance between the center of the pinhole and the closest...
view full answer...
- Curt vs. etrailer Trailer Hitch Receiver For 2021 Jeep Wrangler UnlimitedThe only difference between the Curt and etrailer trailer hitch receivers that fit your 2021 Jeep Wrangler Unlimited is the power coat finish on the hitch: - Matte Black: etrailer Trailer Hitch Receiver # e98856 - Gloss Black: Curt Trailer Hitch Receiver # C13392 Apart from that the hitches have the same ratings, install, and clearances. I like the matte black more because it hides scratches and dings better than the glossier finish (plus it looks a bit more rugged). Otherwise, if the...
view full answer... - Recommended Trailer Hitch and Wiring Harness for a 2022 Jeep WranglerI suggest the etrailer Trailer Hitch Receiver, # e98856 for your 2022 Jeep Wrangler. This is a fully welded Class III trailer hitch that bolts onto your Jeep Wrangler's frame with no welding required. It has a 9" long receiver tube that helps get bike racks and cargo carriers past the spare tire. For wiring, I suggest the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, # 118786. This provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's...
view full answer... - Will the Yakima EXO # Y44ZR Work with a Spare Tire on My 2021 Jeep Wrangler 4xe? If you plan to use the Yakima EXO Swing Away Storage System w/ Enclosed Cargo Carrier and Cargo Carrier - 2" Hitches # Y44ZR on your 2021 Jeep Wrangler 4xe, you definitely need a hitch extender. This is because the distance from the center of the shank's pinhole to the closest part of the carrier is only 4-1/4" long. With that being said, the only compatible extender to use with the EXO is the Yakima StraightShot Hitch Extension - 2" Hitches - 7-1/4" Long # Y69VR. You are not able to use...
view full answer... - What is the Difference Between the Curt C13392 and the etrailer e98856 for My 2022 Jeep Wrangler?For your 2022 Jeep Wrangler, the only difference between the etrailer Trailer Hitch Receiver - Custom Fit - Matte Black Finish # e98856 and the Curt Hitch # C13392 is that the Curt hitch comes with a higher-quality gloss outer coating over the base powder coat than the etrailer hitch. This ultimately provides you with more protection against rust and corrosion. Other than that difference, these hitches are exactly the same. With this in mind, I recommend the Curt hitch because of the higher-quality...
view full answer... - Recommended Trailer Hitch and Extender for Bike Rack on 2023 Jeep WranglerThe trailer hitch that I recommend for a 2023 Jeep Wrangler is etrailer Trailer Hitch Receiver part # e98856 as it has the longest receiver tube so it will offer the best clearance for hitch mounted accessories. This can then be combined with the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # 118786 for a trailer wiring harness. In most cases, you'd just secure the trailer connector to the safety chain loops on the trailer hitch but if you want it to look a bit cleaner...
view full answer... - Trailer Hitch and Wiring Recommendation for 2021 Jeep Wrangler Unlmited RubiconFor your 2021 Jeep Wangler Unlimited Rubicon we have the etrailer hitch part # e98856 that is a confirmed fit that would work great and then for a 4-way I would go with the Tekonsha part # 118786 as it has the most reliable converter box and an easy install.
view full answer... - Recommended Hitch and Wiring Harness for a 2020 Jeep Wrangler I would be happy to make a couple for you! To add a hitch to your 2020 Jeep Wrangler, I recommend the Curt item # 13432. This hitch is custom fit and bolts to your Jeep super easy with four included bolts. It's got a 2" receiver with a 3,500 lbs towing capacity and a 350 lbs maximum tongue weight so it will be great for towing or trailer or using accessories like a bike rack or cargo carrier. I have linked an installation video below to help you get this hitch set up. For a wiring harness,...
view full answer... - Trailer Hitch For A 2023 Jeep Wrangler Unlimited We have the perfect trailer hitch that is confirmed for your 2023 Jeep Wrangler Unlimited! The etrailer Trailer Hitch Receiver # e98856 has a bolt-on installation with no welding required. It has a matte black powder coated finish that is over a protective base coat that offers superior rust resistance. The trailer hitch has a maximum gross trailer weight up to 3,500 pounds and has a maximum tongue weight up to 350 pounds. I would recommend checking your vehicle's manual to find the...
view full answer... - What is Dimension Difference Between Draw Tite and Curt/etrailer Hitches that Fit 2022 Jeep WranglerHey Steve, so between the hitches that fit your 2022 Jeep Wrangler Sahara the etrailer part # e98856 and the Curt # C13392 have the exact same dimensions, and the Draw Tite part # DT78MR is slightly different. The only real difference is the length of the hitch tube. The Curt/etrailer sticks out a little further whereas the Draw Tite is a litte more recessed. From the end of the hitch tube to the first mounting flange the Draw Tite sticks out 6-1/2 inches whereas the Curt/etrailer has...
view full answer... - Trailer Hitch and Wiring that Fits 2024 Jeep WranglerThe etrailer hitch part # e98856 is a fit for your 2024 Jeep Wrangler. The trailer wiring harness part # 118786 is also a fit too.
view full answer... - What Cargo Carrier and Swing Away Adapter do You Recommend for My 2021 Jeep Wrangler 4xe?If you need to be able to carry 150-200 pounds on your 2021 Jeep Wrangler 4xe, I recommend using the 24x60 etrailer Cargo Carrier for 2" Hitches - 500 Pounds # e98874 along with the Kuat Pivot 2 Swing Away Hitch Extender for Bike Racks - 2" Hitches # PVP20B. The Pivot 2 allows you to swing the cargo carrier to the passenger's side of the vehicle in 90 degree and 120 degree increments. With this adapter, the cargo carrier will retain its 500-pound weight capacity. Although, the capacity...
view full answer... - Recommended Trailer Hitch Receiver For a 2023 Jeep Wrangler 4xe For Carrying Heavy E-BikesI recommend the etrailer Trailer Hitch Receiver # e98856 for your 2023 Jeep Wrangler 4xe. This will give you a 2" opening and the hitch pin has been moved out giving you additional clearance for your spare tire. The Hollywood Racks Sport Rider SE Bike Rack # HLY84FR will allow you to carry 2 bikes up to 80lbs each with a maximum wheel width of 5".
view full answer... - What Class Of Hitch Do I Have On My 2022 Jeep Wrangler Rubicon? That is a good question Joel. I will start by saying that these days, the class designation for a trailer hitch does not always tell you the full story. In some cases the line between class 2 and 3 can get pretty blurry with so many different hitches out there. We try to stick to using the receiver size, and weight capacity to describe a specific hitch. All of that said, since the hitch installed on your 2022 Jeep Wrangler Rubicon has a 2" receiver, we would have to assume that it is a...
view full answer... - Trailer Hitch and 4-Way Wiring Harness For a 2023 Jeep WranglerWe do have both the trailer hitch and 4-way wiring harness you are needing for your 2023 Jeep Wrangler. Trailer Hitch - etrailer Trailer Hitch Receiver # e98856 This hitch is made in the USA, has a bolt-on, no-drill installation and will provide you with a 2" hitch receiver which is the most common size used for hitch mounted accessories such as bike racks, cargo carriers and ball mounts. It also has a nice matte black finish and the receiver tube sticks out further to allow you to use...
view full answer... - Does The Tekonsha T-One Vehicle Wiring Harness Have a Powered Module? Yes, the T-One Vehicle Wiring Harness # 118786 for your 2021 Jeep Wrangler Unlimited includes the powered ModuLite. This will reduce strain put on the factory harness by supplying power to the trailer wiring from the battery on your Wrangler. If you are needing a receiver I recommend the etrailer Trailer Hitch Receiver # e98856. This receiver has a matte black finish that will match the factory parts on your Wrangler. It also uses a 9" long receiver tube that helps with clearance as you...
view full answer... - Kuat Pivot 2 Swing Away Hitch Extender Weight Capacity On a 2021 Jeep Wrangler Unlimited RubiconThe Kuat Pivot 2 Swing Away Hitch Extender # PVP20B does reduce hitch capacity by 50% so the maximum weight of capacity with the etrailer Trailer Hitch Receiver # e98856 on your Jeep is going to be 175lbs. If this was used on a receiver with a 600lb capacity the maximum weight would then be 250lbs the maximum of the Pivot and not the 50% of hitch capacity. As you have a 2021 Jeep Wrangler Unlimited Rubicon we do have the Draw-Tite Max-Frame Trailer Hitch Receiver # DT78MR that fits models...
view full answer... - Compatibiility of Hollywood Racks RV Rider Bike Rack Behind a 2022 Jeep Wrangler With Spare TireWe noticed when we installed the etrailer Trailer Hitch Receiver # e98856 on a similar 2022 Jeep Wrangler it had 8" from the center of the hitch pin to the rear edge of the stock spare tire. This would likely not allow you to fold up the Hollywood Racks RV Rider Bike Rack # HLY64FR. You can consider using the Yakima BackSwing Swing Away # Y02483 which will extend the bike rack further from the spare tire and allow you to fold it up. It will also allow you to swing the bike rack to the right...
view full answer... - Will the Yakima HoldUp Bike Rack Fit On a 2020 Jeep Wrangler?As long as your 2020 Jeep Wrangler has a 2" hitch like the etrailer Trailer Hitch Receiver # e98856 then yes the Yakima HoldUp Bike Rack for 2 Bikes # Y02443 will work just fine. It sounds like you might also be concerned with clearance with your spare tire as well, in order to figure out if it'll clear your spare tire you'll just need to measure from the hitch pin hole out past the spare tire; if that measurement is less than 7" the rack will fit the rack will work when folded up or...
view full answer... - Will the etrailer.com Hitch e98856 fit a 3 Inch RV BumperI had the width of the frame bracket on the etrailer.com Trailer Hitch Receiver - Custom Fit - Matte Black Finish - Class III - 2" # e98856 measured and it will be 3-1/16 inches. You may need a small spacer to make this work, but it will be the best option we currently have available. However, this hitch may be rated higher than your bumper, so you will need to make sure of its capacities before loading.
view full answer...
- Do I Need a Hitch Extender to Use on the Kuat Beta on My 2020 Jeep Wrangler Unlimited?When considering the rear bumper and spare tire clearance when using the Kuat Beta - Aluminum Folding 2 Bike Rack for 2" Trailer Hitches # B202-2, it truly depends on two different factors: where your hitch installs on your Wrangler and the width of your spare tire. On the Beta, since the distance from the center pinhole of the upright of the rack measures 7-1/2 inches long, that is the length that determines if you need a hitch extender. If, for example, you have a hitch installed like...
view full answer...
- 4-Way Wiring Harness For 2020 Jeep Wrangler Compatible With Tow Bar WiringYou can add a 4-way wiring harness to your 2020 Jeep Wrangler that has tow bar wiring installed, and what you will need is a wiring harness from Tekonsha: - T-One Vehicle Wiring Harness # 118786 This harness plugs into the tail light housing of your Wrangler, and will work with a splice-in tow bar wiring kit or a plug-in tow bar wiring kit as the T-One would plug in between the tail light connectors and tow bar wiring connectors. The only other thing you need if you don't have one is...
view full answer... - Will etrailer Trailer Hitch Receiver Fit 2023 Jeep Wrangler SaharaYes, the etrailer Trailer Hitch Receiver # e98856 will fit your 2023 Jeep Wrangler Sahara. This hitch bolts onto the rear bumper beam for a simple installation. Based on what other Sahara owners have said, you will likely find an extra plate with existing bolts where the hitch installs. Remove the plate and bolts, put the hitch into place, then add the plate back and use the pre-existing bolts along with the bolts from the hitch to finish the installation. If you plan on towing, you will...
view full answer...
Do you have a question about this Trailer Hitch?
Used Items Available
Condition: Like New
Notes: May have damaged packaging or minor cosmetic blemishes.
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Expert Research:
Adam R
Video by:
Joshua S
Video by:
Zach D
Video by:
Jonathan Y
Video by:
Michael B
Video by:
Thomas T
Video by:
Samuel H
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Test Fit:
Randy B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Jacob H
Test Fit:
Ryan G
Test Fit:
Adam E
Test Fit:
Bradley B
Updated by:
Wilson B
Updated by:
Carrie F
Written by:
Kristina F
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
3/3/2022
I researched and found that there is install note that needs to be added to the manual. Some models may have existing bolts attaching a plate with weldnuts on it. The hitch will need to be slid inbetween the bracket and the mounting tube witht he factory hardware reinstalled, securing the hitch.