Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"
Item # C15810
Retail:$657.95
Our Price: $421.43
You Save: $236.52
Confirmed to Fit
2016 Ford F-350 Super Duty
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (172)
- Q & A (0)
- Photos
2016 Ford F-350 Super Duty - Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2"
- 2-1/2 Inch Hitch
- Class V
- 20000
- Visible Cross Tube
- CURT
- 2700
- 20000 lbs WD GTW
- 2700 lbs WD TW
- Custom Fit Hitch
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your Ford F-350 Super Duty's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Carbide black powder coat finish over protective base coat offers superior rust resistance
- Sturdy, square-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA
- Mounting hardware may be imported
Specs:
- Receiver opening: 2-1/2" x 2-1/2"
- Rating: Class V
- Maximum gross trailer weight: 20,000 lbs
- Maximum GTW when used with weight distribution: 20,000 lbs
- Maximum tongue weight: 2,700 lbs
- Maximum TW when used with weight distribution: 2,700 lbs
- Maximum gross trailer weight: 20,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
15810 CURT Class 5 CD Trailer Hitch Receiver
Installation Details
Weight Carrying Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Weight Distribution Capacity
Gross Towing Weight (GTW):
20,000 lbs.
Tongue Weight (TW):
2,700 lbs.
Tech Tip
Spare tires 20" and larger will not be able to be stored in the original location underneath the vehicle. No drilling required for installation , Spare tire will need to be lowered or removed temporarily for hitch installation
Complete Towing Package for 2016 Ford F-350 Super Duty
Retail:$777.90
Package Price:$534.42
2016 Ford F-350 Super Duty Owners Who Purchased This Trailer Hitch Also Bought...
Popular F-350 Super Duty Trailer Hitch Accessories
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- etrailer mistake
- Product did not meet expectations
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class V - 2-1/2" - C15810
Average Customer Rating: 4.8 out of 5 stars (172 Customer Reviews)
Specially designed for heavy-duty towing, this fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Steve04/24/2024
FordF-350 Super Duty
The box was destroyed but other than some missing paint I don't think anyone could hurt this hitch because it's a tank. I would like suggestions on what paint to use for touching up the scratches.
I bought it to replace the 2 1/2 inch OEM hitch (2015 F350) which is nowhere near this capable. I'm looking forward to installing it and no longer worrying about tongue weight limitations. As always thanks etrailer! You remain one of the best companies I've ever dealt with.
by: Kevin02/28/2024
Well built hitch and very easy to install. Needed a hitch capable of towing a 12K loaded toy hauler and this hitch easily handles the load. Very happy with it after using it for the last year.
by: Robert03/30/2023
Wanted a 2.5 receiver for my 2001 Super Duty. Went through two different DrawTite receivers first. The first one had a crooked receiver tube. Never tried to install. The second one I tried to install but it hit the bumper before being able to tighten up to the frame. etrailer was great about sending prepaid labels to ship back. Just a pain to have to re-wrap and take to UPS drop-off. etrailer would not send the Curt as a replacement. Got credited for the DrawTite hitch and I ordered the Curt Hitch. Had it installed in 20 minutes. Factory wiring harness mount bolted right up. Curt hitch is well built and seems to have a better finish than the DrawTite.
by: Corey 04/22/2024
Seems to be good so far the powder coating or paint is still in good shape and we get alot of salt on our roads, so that’s a plus and so far the pin hole has not wallowed put I don’t tow super heavy 10kish but it’s been good so far
by: Jimmy D12/09/2023
2006 Ford F-250 Super Duty
I used this to replace my factory Ford 2 1/2 inch hitch. This thing is twice as heavy and has a lot more rating. I strapped this monster to my motorcycle jack and installed by myself. I tow a 26 ft. deck over triple axle trailer. Thank You.
by: Dwain11/08/2023
The hitch is working great. The reason I didn't give it 5 stars is because I had to use some bolts & hardware off of the old hitch. The new hardware didn't fit in some places due to tight clearances. But I was able to install it fine. Thanks for checking up. This reminds me that I need to get back up there & check to make sure everything is right & tight!
by: William 09/13/2023
So far so good! Easy installation and fit my truck as advertised. With proper 2-1/2" hitches (vs adapters) the connection is solid. I'll never exceed the capacity of the hitch receiver, so I expect it to last. A few rust bits where the coating has been disrupted, but so far holding up to New England winter/dirt roads
by: Michael 03/07/2024
My hitch came in 2 days and was exactly as described. Super happy with e trailer. Love the instruction videos, very helpful.
by: Duzzi06/03/2024
Its been a very solid hitch for my 99 f350 7.3 SRW diesel.
I have towed a 14k dump trailer with a SY35U mini excavator with 2 buckets in it and its been exactly what I needed!
by: Joshua L07/08/2017
2008 Ford F-250 Super Duty
Curt receivers are great quality, plus etrailer had my order shipped the same day and was delivered the next day!
One lesson learned for me was this particular hitch (15810) does not fit with the spare tire on a 2008 F-250.
Thanks again for a great product and extremely fast shipping and customer service! I definitely recommend using etrailer over large box stores.
by: Andrew C02/04/2017
2000 FordF-350 Super Duty
The hitch has held up nicely for the year that I have had it on my truck. It is very stout. The paint has held up well to the elements so far.
It went on fairly easily and all of the holes lined up. It was helpful to have a second person to help hold the hitch in place in order to get the first bolts in.
I purchased this hitch when I realized that the hitch that came with my truck was only rated at 3500lbs, a fair bit less than the trailer I tow..
The box that it came in barely held up to the shipping monkeys on the way out to the Seattle area.
by: Dwayne05/08/2019
1999 Ford F-250 and F-350 Super Duty
The Curt 20,000 pound commercially rated receiver is is built like a battleship! And while it was difficult to man handle alone, I was able to install it using the eight supplied bolts in about 20 minutes. The fit was positively perfect, so someone at Curt did their homework on the design. The only complaint I have is that unlike my Reese Hitch, it did not include the 2" reducer sleeve. A lousy $15 difference! Don't be cheap, for this kind of money it should be included. Now I get to pay $25 in shipping for a $15 part.
by: Steve C.05/31/2017
2017 Chevrolet Traverse
Ordered Thursday evening just before Memorial Day weekend, and arrived Tuesday afternoon. Was shipped out very quickly with update emails through the entire process! Although the box was a bit torn up from shipping the hitch was still in great shape with all hardware and the wiring for another vehicle I ordered, in the box. Hitch is amazing quality, VERY heavy duty, and bolted right into place! I did have to forgo the nice factory wiring/plug mount and zip tie them into place, but other than that it was a perfect bolt on affair! Will definitely do business with these folks again
by: Kylie06/06/2024
Great product and fits great
by: Jeffrey06/16/2023
2006 FordF-350 Super Duty
Item was delivered quickly with all the bolts and it fit my truck perfectly.
by: Stefan08/10/2022
Excellent build quality and installation was very easy. Needed an extra set of hands during install due to the weight of the receiver.
by: Brandon B08/03/2023
Awesome website, they made the process simple, kept me updated with emails, and delivered the product on time. Companies like this that handle their end, and keep good communication are things we need more of. 10/10
by: Robert 03/07/2024
All around great first time experience! Mike was great and the product showed up way before I was expecting and it fit perfectly.
by: Joss10/05/2023
2005 FordF-350 Super Duty
This unit fit so perfectly on my 2005 f-350 srw. Once again I'm impressed with this company and how quick it came in. Anything I ever need for a trailer I will do business with these people
by: Loren04/17/2020
1999 Ford F-250 and F-350 Super Duty
Heavy duty receiver. Easy install, but definitely need two people because it is heavy. Will handle all my trailers.
by: Keith 03/22/2024
Thank you very much!
by: Brian 06/21/2023
2001 Ford F-250 Super Duty
Fits the 2001 Ford F250 really well. It's quite a bit larger than the class 4 hitch we removed.
by: Kevin 07/29/2023
Order came super quick, looks and fits great! Was able to do by myself with help from a strap and a couple clamps.
by: Jackson 10/27/2023
I’ve never had any issues with the hitch, it’s very solid for heavier towing, all around a good product
by: Kurt 12/09/2023
2012 Ford F-250 Super Duty
Shipping was fast! Packaging was intact. Product was in excellent shape and installed easy.
25
171
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- High Capacity Trailer Hitch for a 1995 Ford F-150 XLT with Regular Step BumperThe 2 Curt hitches you referenced are not a fit for a 1995 Ford F-150. Hitch # C15845 is for Super/Heavy duty cab and chassis models, not regular pickups, and # C15810 is for F-250 and F-350 models. For your F-150 with the regular step bumper you can use Curt hitch # C15300 or # 14001. I have linked some videos showing how these hitches install.
view full answer... - What Hitch Size Has Best Weight Capacities for 2002 Ford F-350The highest capacity hitches we offer for your 2002 Ford F-350 are 2-1/2 inch hitch sizes like the Curt # C15810 that has a 20,000 lb towing capacity. If you are looking for the strongest setup this would be the way to go for your truck. For an adjustable ball mount the highest capacity options fit the 2.5 inch size too like the part # 325-GH-1624 which has a 32k capacity.
view full answer... - Replacement Parts for 2005 Marine Master TrailerTo find the right replacement parts you will need to measure and identify the parts you have. Dexter bought UFP and they do not have any information on your axle with that serial number. A good place to start would be with the bearings. You can look at the bearings to see if they have part numbers stamped on the side. If not, you will need to measure using a digital caliper like the # PTW80157. You can either measure the inside diameter of the bearings, or the spindle where the bearings...
view full answer...
- Class V Hitch for 1999 Ford Super Duty With Ranch Hand Legend BumperThe only custom hitch we can confirm will fit your 1999 Ford Super Duty with the Ranch Hand Legend rear bumper is the Curt # C14355. This is a Class IV hitch instead of V with a 10,000 lb max gross trailer weight. It looks like even if you have the F-350 the max towing capacity for the vehicle is 10,200 lbs so this hitch should be adequate. If you're still set on a Class V we have the # C15810 but I can't confirm this is compatible since it hasn't been tested. The hitch mounts in the...
view full answer... - 7-Way Mounting Bracket Recommendation for Use with Curt Trailer Hitch C15810The Curt hitch part # C15810 does not have a bracket built into it for mounting trailer wiring. Since your truck has a 7-way what you'd want is a 7-way mounting bracket like part # HM48625 which will attach to the bumper of your truck and allow your 7-way to attach to it. Don't install this on the hitch though as you shouldn't ever drill into the hitch.
view full answer... - Weight Distribution System Recommendation for a 2002 Ford F250 Super DutyFor your setup you will definitely need a hitch with a higher capacity. The Curt Hitch # C15410 that you referenced would certainly have enough tongue weight capacity. However, you will still need to determine what the capacity of your vehicle is. If your owners manual says you have a lower capacity than the # C15410 then you need to abide by that as the overall capacity. When determining overall towing capacity you always need to go by the lowest rated component as the overall capacity. If...
view full answer... - Parts Needed To Use 24" - 36" Long Hitch Extender On 2001 Ford F-250Yes, there is a reason a 2" hitch extender is not available in a 24" - 36" length. The reason is that length with that small of a receiver puts way to much leverage on the hitch and would lower your hitch capacity so low it really wouldn't be usable for much. The only way to safely get an extender that long is replacing your 2" hitch to a 2-1/2" with the Curt # C15810 which is a confirmed fit for your 2001 Ford F-250. You can then use the Curt Hitch extender # C45048 which can be either...
view full answer... - Class V Trailer Hitch Options for a 2002 Ford F-250 Super Duty 4x4 LariatWe have numerous Class V hitch options for your 2002 Ford F-250 Super Duty. I have listed them below. Curt Trailer Hitch, # C15410 2 inch receiver Curt Trailer Hitch, # C15810 2-1/2 inch receiver Draw-Tite Trailer Hitch, # DT45508 2-1/2 inch receiver B&W Heavy-Duty Hitch, # BWHDRH25230 2 inch receiver Tork Lift Trailer Hitch, # TLF1002 2 inch receiver Tork Lift Trailer Hitch, # TLF1002-30 2-1/2 inch receiver I have included links to the instructions for the hitches below. You can also...
view full answer... - Comparing Curt Trailer Hitches for a 2001 Ford F-350The difference is that Curt trailer hitch # C15845 is designed to fit cab and chassis style trucks and # C15810 is designed to fit regular pickup truck models. Cab and chassis trucks are the ones you might see on a lot that do not have a bed on them. They turn those into service trucks, utility trucks, and emergency vehicles. The frame rails are closer together on cab and chassis trucks than on regular pickup models. The frame width on a cab and chassis model 2001 Ford F-350 will be 34...
view full answer... - Trailer Hitch Extension and Weight Distribution for 2015 Ford F350 With Truck Bed CamperIf your 2015 Ford F350 has the 2-1/2 inch hitch, you can use the Reese Titan # RP45292 Hitch Box Extension and Reducer. The extension is designed so that it can either be used in its 34 inch configuration or be cut down to 24 inches in length, which is perfect for your needs. When cut down to 24 inches, the extender has a 6000 lb towing capacity or if used with a weight distribution system, the capacity increases to 8000 lbs which would work well. If your truck has a 2 inch hitch, replacing...
view full answer... - Recommended Hitch for 2006 Ford F-350 Towing Dump TrailerFor a hitch that can handle that much weight I recommend the Curt Trailer Hitch Receiver # C15810. This is a Class V hitch with a maximum gross trailer weight of 20,000 lbs and max tongue weight of 2,700 lbs. However, if you have a spare tire 20" or larger it will not be able to be stored in the original location under the truck. Make sure to consult your owner's manual to find the towing capacity for your F-350. The most the 2006 can tow is 15,000 lbs, but for some models the capacity is lower.
view full answer... - Replacement Hitch Mounting Hardware For a Curt 15810 Trailer HitchWe do have the replacement hardware needed for your Curt Trailer Hitch Receiver # C15810. You will need to use the Replacement Hardware Kit for Trailer Hitches # RHK and input the 15810 in the box that says "Hitch Item Number".
view full answer... - Trailer Hitch Availability and Fit for 2002 Ford F-350 Super Duty FX4The correct hitch for your 2002 Ford F-350 Super Duty FX4 will depend on the bumper it has. You can use the linked page to see all options; just use the Select Vehicle Style drop-down menu to choose the type of bumper that is on your truck. Once you select your bumper style the correct hitch options will be shown. Let's say you have a standard or step bumper. In this case you have choices in Class III, Class IV and Class V hitches from Curt and other brands. For a 2-inch Class III hitch...
view full answer... - Can Full-Size Spare be Reinstalled on 1999 Ford F-250 Fitted with Curt Hitch C15410Curt hitch # C15410 allows reinstallation of a spare tire that is on a wheel/rim up to 20-inches in diameter. I confirmed this with my technical contact at Curt. Do please note that this 20-inch dimension refers to the wheel/rim size, not the larger overall diameter of the tire. Some of the other hitches made for your truck, such as the 2-1/2-inch Class V Curt # C15810, do not allow a 20-inch spare to be reinstalled.
view full answer... - Recommended Heavy Duty Trailer Hitch Receiver For 1999 Ford F-350 W/ 8" Deep Drop BumperWe have exactly what you are looking for! You are correct that the Curt Trailer Hitch Receiver # C15810 you were looking at will not fit your 1999 Ford F-350 with an 8" deep drop bumper. Instead I recommend the Curt # C15316 which measures 9" from the top of the mounting flange (Bottom of your trucks frame) to the top of the receiver so it will work with your bumper, and has a 2400lb tongue weight rating and 16000lb trailer weight rating, or a 2400lb tongue weight rating and 17000lb trailer...
view full answer...
- Will Curt Hitch C15810 Fit 16 inch Spare on 1999 Ford Super Duty TruckThe Curt hitch part # C15810 will work for your 1999 Ford Super Duty. The spare sizing information is for the diameter of the rim and not the tire. Since you have a 16 inch rim and this will fit rim sizes smaller than 20 inch this will work well. I attached an install video as well.
view full answer... - Recommended Class V Hitch for 2001 Ford F-350 Long Bed PickupThe Curt # C15845 Class V hitch you'd looked at fits cab and chassis model trucks only, because cab and chassis trucks use a narrower frame spread (outside to outside distance between frame members) than the pickup models do. For a 2001 F-350 Long bed pickup, use the Curt Class V hitch, part # C15810. The hitch has the same 20K towing 2.7K tongue weight capacity and 2-1/2 inch receiver as the hitch you'd looked at, but it will fit your frame spread. The hitch will install using existing...
view full answer... - Mounting Bracket for Wiring Harness on Curt Hitch for 2016 Ford F-350 Super DutyIn order to attach a connector to the Curt Hitch # C15810 you would use a bracket such as the Curt # C57202, and attach your connector's mounting bracket to that. An example of this is shown in the video I've linked which shows the 7- and 4-Pole Trailer Connector Socket w/ Mounting Bracket # HM40975; you can forward to the 0:45 mark to see exactly how this would work. I've attached a link to our page with each of our mounting brackets for you, as well as an install video of the Curt hitch...
view full answer...
- Will Curt Class V Hitch # C15810 Fit a Ford F-250/F-350 With a Full Size Spare TireI spoke with my technical contact at Curt and he informed me that the Curt Hitch # C15810 will fit spare tires with a wheel size of less than 20 inches. We happen to have a Ford F-350 on site, so we checked out the spare tire underneath and it was a 275/70 R18, which is a full size spare tire for the vehicle and it has an 18 inch rim, so the Curt # C15810 that you are wanting would fit the truck we have here. If you check the tire size of your spare and it is under 20 inches, this hitch...
view full answer... - Does the Factory Need to be Removed to Install the Curt Hitch part # C15810Yes, the factory hitch on your 2013 Ford Super Duty truck will need to be removed to install the Curt Trailer hitch part # C15810. If you need trailer wiring you would want the Draw Tite wiring harness part # 18252. For a ball mount and hitch ball you would want the etrailer.com Ball Mount kit part # EBMK25318. You could use the Titan Hitch Box Extension # RP45292 with this hitch as well.
view full answer... - Recommended Trailer Hitch for a 2013 Ford F-350 and Heartland Fuel 287 Toy HaulerIf you are looking for a trailer hitch receiver for your 2013 Ford F-350 then I recommend using the Curt Trailer Hitch Receiver part # C15810. This hitch has a Class V rating with the heavy duty 2-1/2" receiver opening which will allow you to maximize the full towing capacity of your F-350. The hitch is made here in the U.S.A. and comes with a lifetime warranty. I have attached an installation video for you as well. If you are looking for a trailer hitch receiver for your Heartland Fuel...
view full answer... - Drop Measurement of Curt Class V Trailer Hitch # C15810The drop of the Curt Class V # C15810, which is the distance from the top of the hitch crossbar to the underside of the vehicle frame where the hitch mounting flanges attach to the vehicle is 5.63 inches. The distance from the face of the receiver to the first two mounting holes is 12-1/2 inches, as you can see in the photo I've edited for you. I've linked you to an install video, which you can view by clicking the provided link.
view full answer...
- High Capacity Trailer Hitch Recommendation for 2008 Ford F-250 for Heavy Boat TrailerFor a trailer hitch with more towing capacity than you'd need the Curt hitch part # C15810 would be an excellent option. This hitch as towing capacities of 20,000 lbs which would work well for you. As long as you are sure you under the truck's capacity still this would allow you to tow your trailer. You should note that this is a 2-1/2 inch hitch so you may need a compatible ball mount like with part # C45456 which also has a 20k capacity. For a hitch ball you'd then want the part # 63840...
view full answer... - Will Curt Trailer Hitch Receiver # C15810 Fit Around OEM Spare on 2001 Ford F-250To install the Curt Trailer Hitch Receiver, part # C15810, on your 2001 Ford F-250, you will need to temporarily lower the spare tire. You will be able to re-install the spare tire after installation of the hitch. Yes, the hitch will fit with your OEM spare tire. I have linked instructions for the Curt Trailer Hitch Receiver, part # C15810 and an FAQ on trailer hitch installation tips.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Lori W
Expert Research:
Jeffrey L
Video by:
Andrew K
Video by:
Joshua S
Test Fit:
Nicholas E
Video Edited:
Andrew L
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Laura E.
7/10/2017
You are absolutely correct, Joshua. Spare tires larger than 20 inches will not be able to be stored in the original location underneath the vehicle.