Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
(144 reviews)
Price: $172.71
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"
Item # C11406
Retail:$265.95
Our Price: $172.71
You Save: $93.24
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (144)
- Q & A (0)
- Photos
CURT Trailer Hitch - C11406
- Class I
- 1-1/4 Inch Hitch
- 2000 lbs GTW
- Visible Cross Tube
- CURT
- 200 lbs TW
- Custom Fit Hitch
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Drawbar, pin and clip sold separately
- Hitches assembled in the USA, bolts overseas
Specs:
- Receiver opening: 1-1/4" x 1-1/4"
- Rating: Class I
- Maximum gross trailer weight: 2,000 lbs
- Maximum tongue weight: 200 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it, and we've towed with it, so whatever your question, we can answer it.
11406 Curt Class 1 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2015 - 2020 Honda Fit
Weight Carrying Capacity
Gross Towing Weight (GTW):
2,000 lbs.
Tongue Weight (TW):
200 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Gross Towing Weight (GTW):
2,000 lbs.
Tongue Weight (TW):
200 lbs.
Weight Distribution Capacity
Hitch does not allow
use of weight distribution
Tech Tip
No drilling required for installation , Exhaust must be temporarily lowered for installation
Customer Satisfaction Score:
98% were satisfied with this product
2% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Did not arrive in time
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" - C11406
Average Customer Rating: 4.9 out of 5 stars (144 Customer Reviews)
Perfect for light-duty towing, this custom, vehicle trailer hitch receiver features fully welded, gloss powder coated steel construction. Drawbar sold separately.by: Cone04/10/2024
Great install instructions. Took the dog and I about an hour and a half start to finish with a little troubleshooting with dish soap. It has held up great, gets multiple bikes around town. A little wiggle between the hitch and the bike rack but I don’t think it’s the hitch’s fault.
by: Jamie08/08/2023
I bought this for my 2020 Honda Fit for the sole purpose to haul mountain bikes. The hitch was easy to install with basic hand tools. It hold the weight of my ebike along with a friends just fine.
by: Alicia04/07/2024
Hitch is strong with no issues. Great price and easy to install.
by: Larry 08/23/2022
Prompt delivery. Good fit- seems to be good quality (welds, finish). I think it should come with speed nuts to hold the bolts in place- I made my own from thin plastic. If you push the bolts into the car’s frame member you’re in a world of hurt. Working underneath the car on ramps is a bit more difficult than if you’ve got it on a lift.
by: James D.06/07/2017
2016 Honda Fit
The best part of doing business with etrailer is, I know I will find what I need when I go to their website. The Curt Trailer Hitch Receiver fit the Fit. Installation on the 2016 Fit was a challenge, especially compared to installation of the equivalent hitch receiver I installed on a 2008 Honda Fit, which I also bought from etrailer. Instructions suggested that I could remove the exhaust system, as required on the 2016, without special tools. I needed to buy a special tool and even with the special tool I was challenged. All the necessary hardware was included and the installed hitch receiver meets all expectations. I also purchased a wiring harness for the trailer. Again, installation on the 2016 Fit was a challenge, especially compared to the installation of the equivalent wiring harness I installed on a 2008 Honda Fit, which I also bought from etrailer. The 2008 wiring harness is a "plug-and-play" installation with no cutting and no splicing. The 2016 wiring harness requires cutting and splicing and running additional wire. The wiring harness purchased and the instructions supplied enabled me to execute the work successfully. The installed wiring harness meets all expectations.
The installation challenges are because of the Fit, not the Curt products.
Heather A.
9/22/2017
James,Thank you for your review. If you are looking for a wiring harness that does not require splicing into your existing wiring I recommend Item # 119250KIT. This Tekonsha wiring harness is not consider a plug and play application but the sensors on this wiring harness clamp onto your factory tail light wiring to detect current but you will still have to run the black power wire to the cars battery.
Helpful Links
by: Brian 05/03/2024
Great product, amazing customer service!
by: orangejulio10/20/2014
2015 Ford Flex
Installed this on a 2015 Fit. It was the second hitch I've ever installed, and it was by far the easiest. Other than futzing with the muffler's rubber bushings, it was a piece of cake. It was fairly easy to remove the muffler from the bushings, but it was challenging to get the muffler reinstalled. I am sure it'd be easy with the proper tool or with a lift, but I had a tough time doing it lying under the car and with various hand tools. It is in a position where it's hard to get leverage.
I would estimate that it took me 40 minutes, start to finish. Much of that time was eaten up by getting he car jacked up and supported and screwing with the muffler. The actual install of the hitch took about 10 minutes. It was slightly awkward to do by myself, but I borrowed another reviewer's suggestion to use my jack to lift the hitch into place. No drilling was required, as promised.
Also I wanted to mention that while the manual says that you have to use a strap to support the hitch, it seems fine without it, at least with light loads. I've carried my bike on a hitch, and it does not seem to flex very much. I am not at all worried about it, although it might not be strong enough to support three or four bikes. I think it's a function of how this has to attach to the car. The upper and lower supports are separated vertically more than they are horizontally, so that's got to weaken the lateral support capability.
by: Gil T.04/29/2015
2015 Honda Fit
After doing extensive research on what trailer hitch to purchase for my 2015 Honda Fit, I decided on the Curt C11406. It turns out to be an Excellent choice! I Love the Hitch. It was Super easy to install and only took me 30 min. I did it without having to lift up the back end of my car. - Layout a tarp, have tools ready and at hand, pulling the rubber muffler hanger should be spray with soapy water and can be push off the hanger easier (Use gloves if you have them/makes it easier to push off hanger) (Definitely use a torque wrench to ensure proper tightness of bolts.) I also purchased the Curt Rubber Tube Cover C22271. Etrailer has great deals with fast shipping. I highly Recommend. Will be doing business again. Thanks Etrailer!
-GT California
by: Dan 08/15/2023
Included straightforward instructions, and the installation video was super helpful. I've added Curt hitches to 5 cars so far and this was the easiest one yet.
by: Carrie05/25/2022
Honda
Awesome option for the Honda Fit since there aren't many ways to mount a bike.
Super easy to install also! I have been using mine for over a year with no issues.
Great product for the price.
Carrie
5/26/2023
I have been using this hitch for 1 year now with no issues! It is still in great shape and functioning like new. Cant say enough good things about this product for the price, its really a great addition to my Honda Fit.
by: Jacob08/31/2018
Honda
Has performed great for us. Only use it to support a bicycle mount but it is very stable and secure. Especially like the angle that it lowers at to allow the hatch back door of the 2018 Honda FIT to open completely. That was not the case with our previous hitch/2010 Honda FIT combination.
by: Burton10/08/2021
2016 Honda Fit
Thank God for y'alls video or else this venture would not have happened. I needed a tow hitch for my bike because the trunk mount I had was too sketchy. This product fit perfectly on my 2016 Honda Fit.
Little note: Curt's install video either didn't show or vehicle wasn't equipped like mine but I had a 3rd muffler mount further back. That was a doosy getting off. Didn't have a lot of room to screw in the nut above muffler so I had to take the rear passenger off to use the torque wrench. Other than that, I love it!!
by: Dick D. 04/11/2017
2016 Honda Fit
100% satisfied. Great customer service, fast shipping. Great product. The prices are unbeatable. I won't buy from anyone else.
Dick D.
4/12/2018
It has been nothing but great. Thank you for taking time to follow up with me. I appreciate it.
by: Mike H. 01/19/2017
Excellent product. The hitch, 5" adapter, cargo carrier. Easy to put together, all the parts were there. Very fast delivery. Kudos to Lisa and E. Trailer for above and beyond products and service. I have a small car and it was packed when I went camping alone. Now daughter and I are doing a 3 week trip in June. More stuff.
by: Amy B07/16/2021
I watched the video 3 times and found the hitch easy to put on once I got my dad to manhandle the exhaust clips. Small hitch for a small car. Looks good.
by: Nelson R. 01/25/2015
2015 Honda Fit
Easy to fallow instructions, great design, and as always great customer service from etrailer. One thing I recomend is to google how to remove the rubber muffler isolator before you start the installation and you'll save some time.
by: Shannon03/25/2018
2015 Honda Fit
I bought this Curt hitch for my move from ohio to oklahoma since it was cheaper then driving a truck and then tow my car. The instillation was fast once I got everything situated since I did not have access to a lift. Thank goodness I’m a small women. Took me about an hour to finish the install but that includes the prep time.
by: Donald T08/05/2023
Power coated and made in the USA. Make and model specific Video make install a snap.
by: Casey Swizzle05/24/2019
Product installed very easily and only took maybe 20 minutes, hardest part was undoing the rubber exhaust hangers.
by: Dana04/07/2023
this is my 2nd hitch. what's not to like??? good price, easy install and they have a hitch for any make/model
by: Bruce W05/17/2021
Well planned fitting. The box is good for lying on. One hour from UPS delivery to fitted without lifting the car.I think the trickiest part is removing the wires before threading the nuts on.
by: Emile08/13/2021
2019 Honda Fit
Great product, super easy to install everything fits great even on the muffler side. Took the muffler off is the hardest part of the installation
by: Vanessa 02/27/2023
Honda
Worked out great! Bought this because my Honda Fit was too small and U-Haul didn't have this in stock but brought it to the shop and they were able to install it without a problem. Traveled from Denver, CO to Washington, DC with a small U-Haul trailer flawlessly.
by: Chris B11/08/2014
The hitch fit perfect and only took about 20 minutes to install.
by: msaxy01/30/2018
2018 Honda Fit
I have used etrailer for almost all of my car's trailer needs. The website is easy to navigate, along with the review section being valuable. The review section convinced to to stick with Curt rather than use the other available one due to a common modification a few folks mentioned about using the other one. Here's my notes regarding the hitch installation:
1. I use an inexpensive transmission jack to help me install my hitches. This allows one to dry fit the hitch, confirm which holes the fasteners need to be, and allows one to pass the wire through the holes in the hitch before attaching the nuts. It also allows one to hand tighten all three sides, which was useful due to my second note.
2. On the driver's side, there's a plastic fastener that comes very close to the hitch. By having the hitch loosely dry fitted in place, I managed to wiggle it a hair in order to clear this fastener. Otherwise, either 1. This fastener may have gotten damaged, or 2. The hitch may have ended up not flushed to the frame had that offending plastic fastener prevented the hitch from being fully seated against the frame.
3. Not hitch related, but wiring related: The Curt wiring kit want one to run a power lead from the battery all the way back to the trunk. Instead, I purchased piggy-back fuse holders which allows one to either tap and piggy back off an existing circuit or if, as is the case for my 2018 Honda Fit, simply employ a totally unused, switched +12V fuse. I am planning on using Fuse #2, which is located in the fuse box inside the car left of the steering wheel. Fuse #2 is the first column, second position down. This fuse box has 42 fuses, 6 columns, each with 7 fuses. Fuses 1-7 are in left most column, closest to the driver's door, followed by fuses 8-14, and finally to fuses 36-42. There's also a handy map attached to the steering wheel lower cover, which is easy to see after taking a quick pic of it from a phone.
Note: Now with hitch installed, as with all of my hitch equpped cars, one now gains an easy jack point useful for lifting up the rear of the car.
Msaxy
1/31/2019
My Curt hitch is holding up well. My only complaint is that the hitchs clearances are such that its more difficult to and remove the hitch pin clip compared to the many other hitches Ive worked with, including other Curt hitches. No longer can I use my foot to seat the clip pin, as the side clearance of the hitch prevents one from being able to do this.
25
144
Show More Reviews
See what our Experts say about this CURT Trailer Hitch
- Will the Tow Loop on a 2015 Honda Fit Interfere with Install of Curt Hitch # C11406Actually the tow loop you referenced that you have on your 2015 Honda Fit is used to install the Curt Hitch # C11406 that you referenced. If you check out the installation instructions link I attached to the right you will see this in step 3. The u-bolt that comes with the install hardware attaches to the tow loop.
view full answer... - HItch Recommendation for 2019 Honda FitWe have two hitches that are verified to fit your 2019 Honda Fit. One is the Curt # C11406, and the other the Draw-Tite # 24920. They are very similar except the Curt model recommends using stabilizing straps. A strap provides extra support for your hitch receiver when you use a hitch-mounted carrier. For that reason I recommend the Draw-Tite to save you steps each time you install a carrier. This hitch would be excellent for a bike rack, cargo rack or other accessories, but Honda states...
view full answer... - Parts Needed To Flat Tow a 2019 Honda Fit Behind a Leisure Travel Van Along With 2 E-BikesWe do have everything you will need to flat tow your 2019 Honda Fit DX with the Manual transmission behind your Leisure travel van and carry your bikes. First you will need a Roadmaster Direct-Connect Base Plate Kit # RM-521571-5 for your Fit. You will connect your Van and the Fit with the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar # RM-676. You may need a High-Low adapter to keep the bars within 3" of level from your van to the Fit. We found the baseplate to have a height of...
view full answer... - Is Curt or Draw-Tite Better To Carry A Bike Rack On 2019 Honda FitBoth the Draw-Tite 1-1/4" Class I hitch part # 24920 and the Curt Class I 1-1/4" hitch part # C11406 are great options on the 2019 Honda Fit but the Curt is better for bike racks. The Curt is less recessed under the bumper than the Draw-Tite option so if your bike rack folds up it will not rub the bumper of the Honda. If you do not have a bike rack yet you will need a compatible Class I bike rack, for that I recommend Thule Helium Pro 2 Bike Rack - 1-1/4" and 2" Hitches part # TH9042PRO...
view full answer...
- Trailer Hitch Recommendation for 2016 Honda Fit for Carrying Thule Bike RackThe hitch I recommend for carrying a bike rack with your 2016 Honda Fit is the Draw Tite part # 24920 as unlike the Curt hitch for your vehicle # C11406 it does not require the use of a stabilizer strap when carrying a bike rack. Carrying a bike rack in this hitch would not affect your transmission at all. This hitch also comes with everything you'd need to install too. This would work well with a Thule bike rack like the Thule T2 part # TH23JV.
view full answer... - Will The Curt Trailer Hitch Receiver C11406 Block the Rear Tow Point On A 2015 Honda FitThe Curt Trailer Hitch Receiver part # C11406 while installed on your 2015 Honda Fit will cover the rear tow point. However, it will also replace it with a much sturdier and easy to use option. The tow points for the rear of your Honda Fit will now be on the safety chain loops beneath the receiver tube opening on the hitch. The tow point is now moved further away from the vehicle so less chance of damage to the rear bumper from a tow rope or strap can occur. The tow point is much stronger...
view full answer...
- Swagman Chinook Bike Rack on a 2018 Honda Fit for a Bike with FendersYou would want to consult the owners manual of your 2018 Honda Fit for the tongue capacity but I believe it to be 200 lbs., which would mean the Swagman Chinook Bike Rack # S64683 which weighs 47 lbs. will work with your 2018 Honda Fit as long as you have a hitch (this bike rack fits a 1-1/4" or 2" hitch). If you are still needing a hitch, the Curt Trailer Hitch Receiver # C11406 is a confirmed fit for your 2018 Honda Fit and would allow you to use the Swagman rack. The Swagman Chinook...
view full answer... - Using the Class II Swagman XC2 Bike Rack for 2 bikes on a Honda Fit With Class I HitchThe Swagman XC2 Bike Rack for 2 bikes, # S64650 is for a 1-1/4" hitch and rated for Class II but will fit a Class I hitch as long as it does not have the stopper/weld bead in the receiver. The Curt Trailer Hitch Receiver, # C11406 for the 2020 Honda Fit does not have this weld stop and has a tongue weight rating for up to 200 lbs. The Swagman XC2 Bike Rack for 2 bikes, # S64650 is rated for use with two bikes up to 35 lbs. each and the bike rack itself weighs about 25 lbs. (less than 100...
view full answer... - Do Both The Curt And Draw Tite Receivers Require The Exhaust Hanger To Be Bent On a 2017 Honda Fit? The Curt Trailer Hitch Receiver # C11406 may also require that the exhaust hanger on your 2017 Honda Fit to be bent as this is noted in the manufacturers instructions that I have linked below. In looking through the reviews I am seeing that there are definitely complaints of this about the Draw-Tite Sportframe Trailer Hitch Receiver # 24920. Per Draw-Tite's instructions that are also linked below bending the exhaust hanger is a mandatory step in the hitch installation.
view full answer... - Best Way to Take Extra Cargo on Trip Without Breaking the Bank on a 2015 Honda FitYou are on the right track and I do have a solution for you, but pulling a trailer with your 2015 Honda Fit will void the warranty (according to page 307 in the online owner's manual) so I would avoid doing that. You can, however, install a trailer hitch without voiding the warranty as you are covered under the Federal Magnuson-Moss Warranty Act which states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever...
view full answer...
- Does Exhaust Get Lowered to Install a Hitch on a 2015 Honda Fit Yes, when you install the Curt Hitch part # C11406 you will reinstall the rubber exhaust hangers after the hitch has been installed. The exhaust has to be lowered to give you clearance for the hitch to install, but once the hitch has been installed the exhaust will get raised back up into position and hung with the rubber isolators. The most popular bike rack we carry that has been confirmed to fit this vehicle is the Swagman XTC2 Bike Rack part # S64670. This rack has a ton of positive...
view full answer... - Hitch and Bike Rack Recommendation for a 2015 Honda FitI have a better solution for you, but yes the Curt hitch part #C11406 has been confirmed as a fit for your 2015 Honda Fit and would work with a Class I compatible bike rack. Since Curt requires the use of a stabilizer strap with their hitches when used with a non-supported load like a bike rack a better solution would be the Draw Tite Hitch part# 24920 as it does not have the strap stipulation. The Swagman XTC2, part # S64670 is one of the most popular racks because it's so easy to use,...
view full answer... - Curt or Draw-Tite Trailer Hitch for Bike Rack on 2020 Honda FitI recommend going with the Curt # C11406 over the Draw-Tite # 24920 for your 2020 Honda Fit simply because we have seen that the Curt hitches tend to have better welds and a thicker powder coat which results in a higher quality hitch that will last longer against the elements. Attached is an installation video and some pictures of the Curt hitch on a 2019 Honda Fit just to give you a good idea of what it will be like when you get the hitch. If you don't already have a bike rack then I'd...
view full answer...
- Will Trailer Hitch from 2008 Honda CR-V Fit a 2015 ModelBecause they're of different generations, the 2008 being the 3rd Generation and the 2015 being the 4th Generation, enough changed in the design of the rear bumper/frame/fascia area that the hitch design needed to change as well. For a 2015 Honda CR-V, I'd recommend the Curt Class III hitch, part # C13119. If the choice is available, I'll always recommend that folks go with the 2 inch Class III hitch, because there are many more choices available as far as hitch mounted accessories go....
view full answer... - Best Trailer Hitch Recommendation for a 2015 or 2016 Honda FitThe best priced hitch available for either a 2015 or 2016 Honda Fit is the Draw Tite part # 24920 which would be a great option. The Curt hitch part # C11406 is the most expensive and require the use of a stabilizer strap when carrying a non-supported load like a bike rack so it would not be what we would recommend. If you were to do some towing with the # 60353 you would also need the wiring kit. You have the choice of the Tekonsha # 118767 or the Curt # C56395 for wiring harnesses....
view full answer... - What is the Best Trailer Hitch for a 2013 Honda FitThe Curt trailer Hitch # C11406 will NOT be the right fit your 2013 Honda Fit but would fit a 2015 Honda Fit. The trailer hitch I would recommend for your 2013 Honda Fit is the EcoHitch # 306-X7286. If you plan on doing any towing with your 2013 Honda Fit please refer to the owners manual to view towing maximum limits. I have included installation details and video for you as well.
view full answer... - Best Hitch Recommendation for a 2015 Honda Fit for Bike RackCurt recommends the stabilizer strap with non-supported loads like bike racks to help support the hitch when going over bumps to prevent some of the vertical shock from being transferred to the hitch. Curt does this as a precaution, it's not that Draw Tite or Hidden Hitch are stronger. Both hitch brands make outstanding hitches that are typically stronger than what they are rated for. I would say that Curt just happens to approach the idea of a bike rack/cargo carrier being used in a lower...
view full answer... - Trailer Hitch Recommendation for 2018 Honda Fit for Carrying Bike RackSince the Curt Class I hitches require the use of a stabilizer strap when carrying a non-supported load like a bike rack the Draw Tite part # 24920 is the best hitch option for your 2018 Honda Fit. For trailer wiring you'd then want the part # 118767 which is a confirmed fit as well. For a ball mount part # 36071 and hitch ball part # 19256.
view full answer... - Compatibility of Anti-Rattle Device with Bike Rack Secured by a Hitch BallCurt Class I trailer hitch # C11406 is confirmed to fit properly on your 2016 Honda Fit. However, the hitch I recommend instead is the Draw-Tite # 24920. This hitch installs identically and has the very same capacity, but it costs less and does not have the requirement of using the support strap # 18050 which Curt specifies for maintaining the warranty on your hitch when it is used with a non-trailer load like a bike rack. My contact at Thule confirmed that they used to offer a hitch-ball-mount...
view full answer... - Recommended Trailer Hitch Receiver and Bike Rack Compatible with 2019 Honda FitFor your 2019 Honda Fit, we currently have only one trailer hitch receiver available that is compatible. I recommend the Curt # C11406 which is a Class I trailer hitch. This hitch is rated for up to 200 lbs tongue weight, but you will want to check your owner's manual to see if Honda has a further restriction. Curt requires stability strap # 18050 with any non trailer load on their Class I and Class II hitches, so you will need that strap to keep Curt's warranty intact. There is a...
view full answer... - Hitch Recommendation for a 2015 Honda FitThe only hitch we offer that has been confirmed to fit the 2013 Honda Fit so far is the Curt hitch part # C11406. For a bike rack for this hitch I would recommend you check out the Swagman XTC2 Bike Rack part # S64670. This is a very popular rack with our customers that has been very highly reviewed. See review video.
view full answer... - Trailer Hitch and Wiring Recommendation for 2018 Honda FitOffically Honda states your 2018 Honda Fit is not rated for towing a trailer. Since people will still tow and there is a demand for a hitch for your vehicle we have a hitch like the Curt part # C11406 which is a confirmed fit as well as trailer wiring like # 118767. For a ball mount you'd need the part # C45521 as well.
view full answer... - Recommended Trailer Hitch Receiver, Wiring, and Ball Mount for 2020 Honda Fit LXCurt confirms the fit of the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11406 for your 2020 Honda Fit LX. The Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56395 is also confirmed by Curt as a fit for your LX model. I recommend using the ball mount # C45521, pin and clip # F-4, and hitch ball # A-82.
view full answer... - Ordering Replacement Hitch Hardware for 2019 Honda FitWe sell replacement hardware for all of the hitches we offer with the part # RHK. You'd need to enter your hitch part number on the product page and then select the manufacturer from the drop down menu.
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Jameson C
Expert Research:
Adam R
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Test Fit:
Nicholas E
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Written by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Isabelle B
Video by:
Jonathan Y
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Larry
8/25/2023
One year later- the hitch is doing it’s job. I’m using it with a bike carrier.