Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

See what our Experts say about this CURT Trailer Hitch

• What Do I Need to Use Hitch C11109 with my 2004 Chevy Cavalier
  The hitch, # C11109, includes all the mounting hardware you need to install the hitch to your 2004 Chevy Cavalier. In order to tow a trailer, you also need to purchase a drawbar, and the ball itself that sits on the drawbar. The drawbar for this hitch is part # 3592. This bar includes a hitch pin and clip. Your drawbar requires a ball with a shank diameter of 3/4 inch. I have added a page link that will show you all the balls that would fit your drawbar. You need to select the ball diameter...
  view full answer...
• Are Any Modifications Needed to Install Curt Class I Receiver Part C11109 on 2003 Pontiac Sunfire
  The CURT Class I Receiver you mention, part # C11109 can be installed by a person with average mechanical ability in a bit more than an hour. The only modification that would be required would be drilling to enlarge two existing bolt holes. There is no reason that a vehicle with a manual transmission cannot be used for towing. You will just want to use caution when starting on hills. Your owners manual should have information about the towing capacity of your Sunfire, you will not want...
  view full answer...
• Recommended Hitch Bike Racks for Class I Hitch on 2002 Pontiac Sunfire
  Hitch adapters like the Brophy # HTAD are convenient for joining different sizes of hitch receiver and accessory, such as your 2-inch Thule bike rack in your 1-1/4-inch hitch. But the dark side of adapters is that they all cause you to lose 50-percent of your hitch's capacity. The loss of capacity results from the change in the geometry of the system - the adapter/extender allows much more leverage to be applied on the hitch tube. Your car can accept only a light-duty Class I hitch rated...
  view full answer...
• Replacement Installation Hardware for a Curt Trailer Hitch on a 2005 Chevy Cavalier
  To replace the hardware for trailer hitch # C11109 you will need Replacement Hardware Kit for Trailer Hitches Item # RHK. Enter the hitch number and manufacturer where indicated on the RHK to get the proper hardware. Once you add it to your cart you can see shipping options. I have also included a link to a video showing an example installation of the hitch for you.
  view full answer...
• Is Drilling or Modification Needed to Install Draw-Tite Trailer Hitch # C11109, 2000 Chevy Cavalier
  To install the Curt Trailer Hitch, # C11109, to your 2000 Chevy Cavalier, you will need to temporarily lower the exhaust to get the hitch into position but then put it back after the hitch is installed. The only drilling that may be required is to enlarge some existing holes needed for installation. It will also require you to trim the heat shield. I have included a link to the installation details for reference. If you plan on doing some towing, the recommended ball mount is # C45519...
  view full answer...
• Recommended Trailer Hitch for 1997 Chevy Cavalier LS Convertible
  For your 1997 Chevrolet Cavalier LS convertible, I recommend the Curt Trailer Hitch Receiver # 24733. This Class I trailer hitch is confirmed to fit your vehicle as long as your Cavalier is not the Z24 model and will provide a 1-1/4 inch receiver opening with a 2,000 pound towing weight capacity. I also recommend checking your copy of the owner's manual to see what the vehicle's specific towing capacity is, as it may be less than what the hitch can support. You will need to stay below...
  view full answer...
• Trailer Hitch for 2002 Chevy Cavalier LS
  The hitch that fits for your 2002 Cavalier LS is the Curt Trailer Hitch Receiver # C11109. If you were planning on using the hitch for light duty towing, you'd need the following items to complete your towing set-up: Trailer wiring harness, part # 18252 Ball mount, part # 3592 1-7/8 inch ball mount, part # 19256 or 2 inch ball mount # 19258
  view full answer...
• What Size Drill Bit is Needed to Install Class I Curt Hitch on a 2004 Chevy Cavalier
  Curt recommends using a 7/16" drill bit to install the Class I Hitch Receiver # C11109 on your 2004 Chevy Cavalier. The hardware used to secure the hitch in those locations will be 7/16-14 bolts that are provided as part of the installation hardware with the hitch. Attached is an installation video of this hitch on a 2003 Cavalier for you to check out. If you let me know what you plan on using the hitch for I'd be more than happy to make any additional recommendations that may be necessary.
  view full answer...
• Will I Have to Drill into the Frame of My 2003 Chevy Cavalier to Install Curt Hitch # C11109
  In order to install this Curt Trailer Hitch # C11109 on your 2003 Chevy Cavalier, you will only need to use a drill to enlarge some existing holes. You will have to temporarily lower your exhaust, but the exhaust will be reinstalled when the installation is complete. You will also need to trim the heat shield. I attached the instructions in a link below for you to check out also. You may also be interested in purchasing the following: Sportframe Drawbar 2-1/8 inch Rise or 2-3/4 inch...
  view full answer...
• What is the purpose of the U-Shaped Block on Trailer Hitch 24613 for a 2002 Pontiac Sunfire
  The Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11109 is a confirmed custom fit for your 2002 Pontiac Sunfire that is not a GT. I attached an installation video for you. If you plan on doing some towing, first consult the owner's manual to make sure it is permissible to do so and for the vehicle capacities. The proper ball mount for this hitch and vehicle is # 3592. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring use # 18252.
  view full answer...
• Curt Trailer Hitch Receiver Hitch on a 2002 Pontiac Sunfire
  Yes, the picture of the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" # C11109, is an actual photograph of the hitch, taken here in our studio. It is possible that the other pictures you saw were a Typical Photo. But this, without a doubt, is and actual picture of the real hitch. This is a custom fit for a 2002 Pontiac Sunfire, and will fit your vehicle as long as it is not the GT model.
  view full answer...
• Hitch Recommendation for a 2000 Chevy Cavalier
  For your 2000 Chevy Cavalier I would recommend you get a Curt Trailer Hitch # C11109. I attached an installation video for this product for you to check out also. You may be interested in the following products to complete your towing setup: Trailer Wiring Kit # 18252 Ball Mount # 3592 1-7/8 in Hitch Ball 19256 2 inch Hitch Ball 19258
  view full answer...
• Does Curt Hitch # C11109 Fit 2000 Pontiac Sunfire
  Yes, the Curt hitch part # C11109 does fit your 2000 Pontiac Sunfire. It fits the sedan and coupe models.
  view full answer...

Do you have a question about this Trailer Hitch?