Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
(13 reviews)
Price: $188.31
In Stock
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
Item # 13371
Retail:$279.95
Our Price: $188.31
You Save: $91.64
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (13)
- Q & A (0)
- Photos
CURT Trailer Hitch - 13371
- Class III
- 2 Inch Hitch
- 6000 lbs GTW
- Visible Cross Tube
- CURT
- 600 lbs TW
- 11000 lbs WD GTW
- 1100 lbs WD TW
- Custom Fit Hitch
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.
Features:
- Custom fit is designed specifically for your vehicle
- Precision, robotic welding maximizes strength and improves fit
- Bolt-on installation - no welding required
- Complete hardware kit and installation instructions included
- Lifetime technical support from the experts at etrailer.com
- Gloss black powder coat finish over protective base coat offers superior rust resistance
- Stylish, round-tube design
- Ball mount, pin and clip sold separately
- Hitch assembled in the USA, bolts overseas
Specs:
- Receiver opening: 2" x 2"
- Rating: Class III
- Maximum gross trailer weight: 6,000 lbs
- Maximum GTW when used with weight distribution: 11,000 lbs
- Maximum tongue weight: 600 lbs
- Maximum TW when used with weight distribution: 1,100 lbs
- Maximum gross trailer weight: 6,000 lbs
- Limited lifetime warranty
etrailer.com Technical Support
At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.
13371 Curt Class 3 Trailer Hitch Receiver
Installation Details
This Product Fits The Following Vehicles
- 2009 - 2014 Ford F-150 without factory hitch
- 2010 - 2014 Ford F-150 Raptor without factory hitch
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Product did not meet expectations
- Alternate product found
Customer Reviews
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13371
Average Customer Rating: 4.8 out of 5 stars (13 Customer Reviews)
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.by: Paul 12/31/2022
2013 Ford F-150
Worked perfectly on my pick up easy ins tallation
by: bilbo8167003/31/2014
Great hitch and it has easy installation. It took me and my son about 30 minutes to install it.
by: Nicholas04/22/2018
2010 Ford F-150
Delivery was super fast. When I opened the box, and went to install it, the arms that attached to the frame rails did not line up. The tow hitch looked to be a little bent. Possible damage in shipping. Once I bent the brackets in a little, everything seemed to work. Super fast installation. Took 15 minutes. My only recommendation would be to send lock washers instead of flat washers for a little more bolt security. Overall pleased with the product. Seems to be solid.
-Nick
by: Fred04/03/2020
Great products my trailer hitch was a breeze to install.
Bike rack is gonna work great for my trips to state parks
And stuff. 5 stars all the way
by: Tim02/20/2018
2010 Ford F-150
etrailer came thru. excellent hitch and a great value. Thanks!
by: James 04/14/2021
I like the easy installation of the pro duct.
by: mark12/09/2016
2010 Ford F-150
easy to install. very reliable!
by: Tyon02/16/2022
2013 Ford F-150
Very easy to install thank you.
by: Brian 11/07/2021
Easy to install
by: Carol 10/12/2023
by: Anthony 10/05/2022
by: Rich 06/29/2021
by: Shanice10/13/2022
13
13
See what our Experts say about this CURT Trailer Hitch
- Weight Distribution and Sway Control Recommendations for a 2006 Ford F-150 and Jayco JayfeatherWhen choosing a weight distribution system, you will want to calculate the tongue weight of the trailer when it is loaded and ready to tow. Then you have to add in the weight of anything loaded behind the rear axle of the tow vehicle to the tongue weight of the trailer. Once you have the total tongue weight calculated, you will want to choose a system that has a tongue weight capacity range that puts your calculated total right in the middle of the range. For example, if the loaded weight...
view full answer... - Trailer Hitch, Wiring, And Brake Controller For A 2011 Ford F-150For your 2011 Ford F-150, I recommend the Curt Trailer Hitch Receiver # 13371, as this hitch will offer the most capacity at 600-lbs tongue weight, and an 6,000-lbs maximum GTW. However, you'll want to reference your vehicle's owner's manual for your maximum towing capacity and compare that rating to your vehicle, and utilize the lower rating between the two. For wiring, if you do not have a factory 4-flat at the rear of your vehicle you can add one with # C58044. Since you mentioned...
view full answer... - Can Trailer Hitches for 2009 Ford F-150 Be Used with Weight Distribution to Tow More than 6,000 lbs.All of the hitches available for the 2009 Ford F-150 are rated for 6,000 pounds gross trailer weight and 600 pounds tongue weight capacity. However, all of the available hitches (see link) are rated for use with weight distribution which will allow the hitch to tow 10,000 pounds (# 13368) to 12,000 pounds (# 75691) depending on the hitch. These are ratings for the hitch, but not the truck. You will need to check the owners manual to determine if a weight distribution system can be used...
view full answer... - Picture Request for a Hitch Installed on a 2012 Ford EscapeYes we do, I attached a couple pictures of the part # 75751 installed on a 2012 Ford Escape just like yours. I also attached an install video for this hitch. For trailer wiring you would want the Tow Ready Wiring Harness part # 118551. For ball mounts I recommend the etrailer Ball Mount Kit # 989900. It comes with 2 ball mounts, 2 balls, a hitch pin with clip, and a carrying bag.
view full answer... - Inside Width Between Mounting Flanges of Curt 13371 Class III HitchThe inside width between the mounting flanges of the Curt # 13371 Class III hitch is 35-1/4 inches, as shown in the provided photo. The hitch is a fit for 2009-2014 Ford F150 trucks that aren't equipped with a factory hitch. I've linked to the installation instructions and an install video for you.
view full answer...
- How Will Available Curt Hitches for 2010 Ford F150 Install in Relation to the Rear BumperCurt actually offers three different hitches for a 2010 F150 (see link). Part # 13368 is a Class III with a square tube crossbar and # 13371 is a Class III with a round tube crossbar. Both hitches have a 600 lb tongue weight, 6000 lb towing capacity. A class IV, part # C14002 with a 1000 lb tongue weight 10000 lb towing capacity is also available. You can see the installation instructions for all three hitches by clicking on the provided links. As you can see by the instructions, all...
view full answer...
- Trailer Hitch Receiver Recommendation for 2009 Ford F150In order to get a square receiver for y our 2009 Ford F150, you'll need to install a frame mounted receiver hitch. The good news is we have a Class IV available as part # C14002 that has a 10000 towing/1000 lb tongue weight capacity for a reasonable price. Once the hitch is installed, you'll have additional capacity up to the towing capacity of the vehicle. You'll also be able to use a ball mount that will put your trailer at the proper height so it'll tow level. The FAQ article I've...
view full answer...
Do you have a question about this Trailer Hitch?
Info for this part was:
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Video by:
Andrew K
Written by:
Lindsey S
Video Edited:
Chris R
Updated by:
Wilson B
Updated by:
Amanda M
Updated by:
Kristina F
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Bilbo81670
3/31/2015
Great, its never missed a lick.