Trailer Hitch Receiver Recommendation for 2009 Ford F150
Question:
I have a 2009 Ford f-150,the back bumper is rated to tow 5000 lbs.,but there is no square reciever hitch , i am limited to putting ball on bumper its not the right height Is there a part i can bolt on a square reciever hith
asked by: Paul R
Expert Reply:
In order to get a square receiver for y our 2009 Ford F150, you'll need to install a frame mounted receiver hitch. The good news is we have a Class IV available as part # C14002 that has a 10000 towing/1000 lb tongue weight capacity for a reasonable price.
Once the hitch is installed, you'll have additional capacity up to the towing capacity of the vehicle. You'll also be able to use a ball mount that will put your trailer at the proper height so it'll tow level.
The FAQ article I've linked shows how to determine the rise/drop ball mount you'll need. If you plan on towing different trailers, using an adjustable ball mount like # C45900 would be a great idea so you can adjust up to 5 inches of rise or 6 inches of drop to get your trailer as close as possible to level.
I've also linked you to an install video showing the hitch I recommended being installed.
![Mike L](https://images.etrailer.com/static/images/catg/people/166_tn.jpg)
Products Referenced in This Question
Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class IV
- 1000 lbs TW
- 10000 lbs GTW
- 12000 lbs WD GTW
- 2 Inch Hitch
- 1200 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Channel Style Adjustable Ballmount - 2" & 2-5/16" Balls - 14,000 lbs
- Trailer Hitch Ball Mount
- Adjustable Ball Mount
- 2 Inch Ball
- 2-5/16 Inch Ball
- Two Balls
- Steel Ball
- Steel Shank - Gloss Black
- Drop - 6 Inch
- Rise - 5 Inch
- Fits 2 Inch Hitch
- 14000 lbs GTW
- Class IV
- CURT
more information >
Product Page this Question was Asked From
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"
- Trailer Hitch
- Custom Fit Hitch
- Class III
- 600 lbs TW
- 6000 lbs GTW
- 11000 lbs WD GTW
- 2 Inch Hitch
- 1100 lbs WD TW
- Visible Cross Tube
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Can Front Air Dam be Reinstalled After Installing Curt Front Hitch on a 2012 Ford F-150
- Q&A: Availability of Hitch for 2013 Ford F-150 With Factory Installed Tow Hitch
- Article: Flat Towing Package for 2007-2018 JK Jeep Wrangler and Wrangler Unlimited
- Q&A: Could Draw Tite Hitch # 75691 Fit 2010 Ford F-150 with Dual Exhaust
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Aftermarket Hitch Options for 2010 Ford F150 With Bent OEM Hitch
- Q&A: Recommended Heavy Duty Trailer Hitch for a 2010 Ford F-150 With a Factory Hitch
- Q&A: Is Weight Distribution Required on 2014 Ford F-150?
- Article: Troubleshooting Brake Controller Installations
- Q&A: How to Determine if 2017 Lexus RX350 Has Factory Tow Package
- Article: Can Solar Panels Run an RV Air Conditioner?
- Article: Rooftop Cargo Carriers
- Article: Brake Controller Installation: Starting from Scratch