Availability of a Front-Mount Hitch for 2011 Mercedes-Benz Sprinter RV

Question

Question:

Hi There! I am looking for a front mount hitch for a 2011 Mercedes Sprinter RV Van, do you have any? The down options in the hitch finder does not have the Sprinter chassis listed. Thanks!

asked by: Tim

0

Expert Reply:

We show no front-mount hitches offered for your 2011 Mercedes-Benz Sprinter RV van. I also checked several other model years of this vehicle and none had a confirmed fit for a front-mount hitch.

We do of course offer rear-mount hitches and those available for the 2011 Sprinter can be seen on the link provided. The fits will depend on the specific version Sprinter you have. The drop-down menu at the top of the page (Select Vehicle Style) will let you choose your vehicle version to see rear-mount hitches that will work for you.

For example, Curt Hitch # 13358 fits both 2500 and 3500 series with the factory step bumper.

expert reply by: Adam R

0

Answer 1

I checked out the install instructions for the EcoHitch front hitch #306-X7352 that fits your 2017 Mercedes Benz Sprinter and there will be a hole that gets cut right where your current sensor is. So what you'd need to do is remove the sensor…

view full answer...

Answer 2

Our friends from Torklift told me that (as of 2020) they recently changed the design to eliminate the need for drilling for ANY Sprinter 2500 models. If you have the older version of this hitch, however, the following advice might still help you out.…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Thanks for the pictures! The best hitch for your 2023 Mercedes-Benz Sprinter 2500 is the etrailer item #e82TR. This hitch is custom fit and bolts to your Mercedes with included hardware. This is a class III hitch with a 2" receiver. It has a…

view full answer...

Answer 6

Hi Robert; hopefully your Roadmaster tow bar is one that attaches to direct-connect base plates as opposed to crossbar base plates; for example the 8,000 lb Roadmaster Sterling would be optimal. Assuming that, here is what you need to flat tow your…

view full answer...

Answer 7

There is a trailer hitch receiver that fits your 2024 Mercedes-Benz Sprinter 2500, made by Curt. The correct part number is the following: - Curt Trailer Hitch Receiver #C13388

view full answer...

Answer 8

You are on the right track. The only way we have that will allow you to use the Thule T2 Pro Xtr Bike Platform Rack part #TH69TX with the 2.5" receiver tube opening on your truck would be with adapter. For this, I recommend the Brophy Hitch…

view full answer...

Answer 9

The Curt hitch part #13358 that you referenced fits the long and short wheelbase versions of your 2016 Mercedes Benz Sprinter 2500 with the factory step bumper. To determine if your spare carrier will fit past the bumper when this hitch is installed…

view full answer...

Answer 10

We do have a trailer hitch fit for your 2016 Mercedes Benz Sprinter 2500 that has the factory step bumper. The Curt hitch part #13358 would be what you need. This fits either length wheelbase as well. In the picture I attached you can see the hitch…

view full answer...

Answer 11

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 12

The Draw-Tite Front Mount Trailer Hitch Receiver #65076 will fit your 2023 Ford F-350 dually. It features a bolt-on installation and has a 2" receiver. The hitch has a 9,000 lb line pull, 500 lb vertical load, and 5,000 lb gross trailer weight.…

view full answer...