bing tracking image
  1. Trailer Hitch
  2. CURT
  3. 2 Inch Hitch
  4. Class III
  5. 3500 lbs GTW
  6. Concealed Cross Tube
Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

Item # 13266
Our Price: $184.31
Trailer Hitch

Will this fit?

To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.

Add to cart
In Stock
CURT Trailer Hitch - 13266
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

In Use/Installed

Customer Photos

Need help with installation?
Locate installers near me
This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant. Great Prices for the best trailer hitch from CURT. Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" part number 13266 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (100)
  • Q & A (0)
  • Photos

CURT Trailer Hitch - 13266

  • 2 Inch Hitch
  • Class III
  • 3500 lbs GTW
  • Concealed Cross Tube
  • CURT
  • 350 lbs TW
  • Custom Fit Hitch

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.


Features:

  • Custom fit is designed specifically for your vehicle
  • Precision, robotic welding maximizes strength and improves fit
  • Bolt-on installation - no welding required
    • Complete hardware kit and installation instructions included
  • Lifetime technical support from the experts at etrailer.com
  • Gloss black powder coat finish over protective base coat offers superior rust resistance
  • Sturdy, square-tube design
  • Ball mount, pin and clip sold separately
  • Hitch assembled in the USA, bolts overseas


Specs:

  • Receiver opening: 2" x 2"
  • Rating: Class III
    • Maximum gross trailer weight: 3,500 lbs
    • Maximum tongue weight: 350 lbs
    • Not rated for use with weight-distribution systems
  • Limited lifetime warranty



etrailer.com Technical Support

At etrailer.com we're committed to the products we sell, and to our customers. Our experienced and knowledgeable staff are available via both phone and email to address your questions and concerns for the lifetime of your hitch. The technicians at etrailer perform hitch installations on a daily basis, making them a valuable resource for do-it-yourselfers. The one-on-one, personal service you'll receive comes straight from an expert in the towing and automotive field. We've installed it, we've wired it and we've towed with it, so whatever your question, we can answer it.



13266 Curt Class 3 Trailer Hitch Receiver

Installation Details 13266 Installation instructions

This Product Fits The Following Vehicles




Customer Satisfaction Score:


Customer Reviews

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" - 13266

Average Customer Rating:  4.9 out of 5 stars   (100 Customer Reviews)

This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. Powder coated steel is sturdy and corrosion resistant.

by:

I was intimated by the prospect of installing this trailer hitch on my 2015 Volvo V60 wagon- although I'm relatively handy I don't do any work on cars. After watching the video and reading through the instructions I dove in. one hour and twenty minutes later the car was completely reassembled and my hitch bike rack was ready to go!

the receiver looks great on my car, and I'm excited about the prospect of using my hitch mounted bike rack in the future.



by:
Volvo

Good fit, relatively easy install. Nice product. I will use it primarily for a bike rack, but it's nice to know I can pull a light trailer with it. It's on a Volvo sedan.

Richard

9/9/2023

Its been great. Only issue, and its a Volvo thing, not a Curt thing is that its low to the ground and you have to be aware if youre backing up towards an obstacle.

Etrailer Expert

Chris R.

11/2/2023

@Richard Definitely a good thing to keep in mind. Thanks for sharing.


by:

Excellent fit on my 2014 Volvo S60. With a helper this project was all of an hour and a half. There are 5 fender well screws and four additional Torx screws near the muffler. We had to trim the muffler heat shield by a little bit and the bumper cutout by the dimensions shown in the instructions. The spacers were required. All went smooth and looks like factory install. Highly recommend! And etrailer shipped super fast and with great follow up.



by:
2011 Volvo C70

OK, so you guilted me into it. Well, maybe the rainy weekend weather had something to do with it as well but anyway I finally installed the hitch and electrical wiring and everything went off with(out) a hitch (pun intended). Now why didn’t I do that at the beginning of the summer? Thanks again for giving me the push needed to get this done.



by:
2015 Volvo S60

I just finished installing this hitch on my '15.5 S60 and it was about as straight-forward as I could have imagined. The only "gotcha" was that the added depth of the hitch plus spacers cause the bumper bar to just barely fit under the bumper cover, making things a little bit tight to get back together. Despite that I was able to get everything torqued down and back together in about an hour. The finished look is completely acceptable to my eye. Yes, a 2" receiver is a chunky piece of hardware to hang under the bumper but at least that's the only visible part. Having to notch the bumper cover is no big deal, either, since you can't see that without getting under the car. In my mind it's all a miniscule price to pay to add utility to my little sedan.



by:
2011 Volvo XC70

Well made product, though looks like it was repainted after manufacture. Great price. Very easy to install on my Volvo XC70 alone. Took about 90 minutes (thanks to etrailer's YouTube video) Have used it for Yakima swing daddy 4 bike rack. Solid!



by:
2011 Volvo XC70

Fit great on my wife's 2011 Volvo XC70. Easy to install, only took about an hour and a half total. Even the wiring harness was easy to fit. Use the hitch to tow a utility trailer and to carry a Thule bike rack.



by:
2016 Volvo V60

I had a neighbor help me with installation and another pair of hands was absolutely necessary. The demonstration in the video was so helpful and I probably would not have attempted to do it myself without it. Thanks for a great product at a reasonable price.



by:
Volvo S60

Installed the hitch this weekend on my S60. Great instructions. Everything lined up perfectly. Only took us about 50 minutes to install. Most of the time was spent fretting over pulling the bumper fascia off. Looks great on the car. Towed my trailer later in the day. Excellent!



by:
2021 Ford Ranger

Delivered quickly and included all hardware and instructions in English. My install was just for my bike. Installed in a few hours alone.



by:
2015 Volvo V60

etrailer.com delivered fast and provided emails throughout the process! Thank you!

2015.5 Volvo V60 R-Design - The Curt hitch #13266 has excellent fit & finish and etrailer.com included clear instructions.

Installation on the Volvo V60 can be done on a set of ramps with basic hand tools per the instructions. No surprises. Using a floor jack, the install can be done by one person, but two people are recommended. Do the install on a warm day or warm garage to ensure the plastic bumper cover is soft and flexible. Installation should take about an hour.

We plan to use this for hauling bikes with our Thule 964 Revolver bike rack.

Chris

7/11/2016

A year later and the hitch continues to work well with limited signs of wear. While it does sit low, no cutting of the rear bumper cover was needed. I would still recommend this hitch to fellow Volvo V60 and V60CC owners.



by:
2013 Volvo XC70

I am very satisfied with the Kurt trailer hitch. The unit was shipped promptly and was well packaged. UPS can beat the _______ out of things.
The hitch fit very well and installed without a problem, thanks to the video. It is not often I find a tutorial demonstrating on the EXACT thing I want to work on. The ''plug and pray'' wiring harness worked flawlessly. [prayers were answered]
All in all things went well except for the kit being short one of the Mickey Mouse ear shims. That was nothing a stack o'washers could not remedy.

John O.

3/16/2021

I use the trailer hitch only occasionally, even less with this Covid 19 stuff happening. To protect it from the salt and slop of Wisconsin roads, the unit was sprayed with Boeshield. Rubber corks were pushed into the side pin holes and official Kurt receiver covers seal the front and rear openings. This thing is very solidly built, like an attachment for my forklift... I am still impressed with the online video tutorial... same make and model [and color] as my Volvo... no mistakes then ! could not be more satisfied..



by:
2013 Volvo S60

Excellent experience all around
1. Great
price at e-trailer
2. Rapid shipping
3. Fairly easy to install. Instructions are very good. Takes a little trial and error to get some of the body panels off. Hitch fit my 2013 Volvo S60 almost perfectly. Bumps up against inside of bumper very slightly but it's easy to force everything to fit and the distortion is not visible. A year later, and the hitch and fit remain rattle free and perfect

Otto

5/22/2017

perfect. no issues



by:

Good product, prompt shipping. looks to be very good quality. I would order from etrailer again for sure if I ever need to. The install was easy considering the type of job that you are doing, estimated time may have been around an hour give or take a few minutes.

My only complaint about the hitch is that it's design makes the hitch sit very low after it is installed. I feel it could be an inch or two higher. I have already scraped it one time in a driveway with no load in the car. I am thinking that I didn't even need to trim the back fascia like the directions recommend because the hitch sits so low.

Chris

7/10/2014

Could you take a picture to show how low it sits?I was thinking of putting this on a S60 R-Design.

Andy H.

8/3/2014

Was this on a V60pic would be appreciated.thanks



by:
2018 Volvo V60

This hitch is well designed, and it was sold and delivered quickly, no hassles.

Frank R.

6/9/2023

No issues with this hitch, just another part of the car.

Etrailer Expert

Mike L.

7/7/2023

@FrankR That's high praise for a trailer hitch. No news is good news!


by:
2015 Volvo V60

This was my second trailer hitch and accessories purchase from etrailer. Product fit and works flawlessly. Great price, quick shipping, great customer service and responsiveness.

Hans

10/26/2017

Thanks for the follow up. Everything works as it should and I have had no problems.



by:

The “hitch”is that I rate “etrailer” as the best site in the market for products and information. The custom fit was perfect for the 2015 XC70.



by:

Still working great one year later. The powder coating is starting to rust off but that is pretty typical of aftermarket receivers especially here in New England. They never hold up like factory hitches so you need to plan on repainting them at some point if you don’t like the look of rust.

Etrailer Expert

Sierra K.

9/29/2021

Touching up the hitch is necessary in keeping it rust free. Rocks and debris can pop up and hit it causing paint chips. Please follow these tips for rust prevention:



by:

I love it. Works great. Still looks great yet NE’s abrasive weather and toad conditions. Highly recommend



by:
2017 Nissan Titan

My son and I installed this trailer hitch our new 2017 Volvo XC 70 start to finish in about 90 minutes. The instructions were clear and the parts fit perfectly. The wiring harness was an easy install as well. The hitch looks good and functions well. We tow a Titan 4x10 aluminum trailer to haul around our Toro Z mower and Cyclone rake rig. I highly recommend etrailer.com. The quality was excellent at a very reasonable price. The next time I need a trailer hitch I will be buying it from etrailer.



by:
2009 Volvo XC70

Works perfectly. Installation required some disassembly and threading the power wire to the battery took a little effort but the instructions were clear and accurate.
Good purchase - very satisfied.

Andy

5/3/2019

Unfortunately I recently sold the car. However the trailer hitch was great, I pulled my 2000lb boat around on a trailer and also used a [rental] trailer: both were uneventful. Great product. Thanks



by:

Well designed and well made. Fits the our 2008 Volvo XC70 perfectly. Installation is straightforward and instructions are clear.



by:
2012 Volvo XC70

The hitch works as promised. it's on our 2012 volvo xc70.



by:

It fit beautifully and the little bit of the underneath fascia that had to be cut away is completely invisible unless you are looking for it and happen to be be underneath the rear bumper :) Successfully towed several small boats after installation and it worked like a charm too.



by:
2014 Volvo XC70

I just bought my second one to put on another car. I like everything about this hitch.

The only downside is it gets rusty after a number of years. They make some with rubber coating but they cost more, so I'm sticking with this one.

Steven

3/14/2021

perfect, we love it. does the job.


25
110
Show More Reviews

See what our Experts say about this CURT Trailer Hitch

  • Hitch Recommendation for a 2015 Volvo V60
    Between the two hitches you referenced that are both confirmed to fit your 2015 Volvo V60 the biggest differences are that the Draw Tite Hitch part # 75916 has a 400 lb tongue weight capacity as well as a 4,000 lb total trailer weight capacity. Whereas the Curt # 13266 has a 350 lb tongue weight capacity and a 3,500 lb trailer weight capacity. Also, the Draw Tite hitch does not require the use of a stabilizer strap when carrying a non-supported load like a bike rack or cargo carrier. The...
    view full answer...
  • Is Fascia Trimming Required to Install Hitch on 2017 Volvo V60
    Due to the lower fascia design of your 2017 Volvo V60 there isn't a way to install a hitch like the Curt # 13266 without trimming the rear fascia. This is very common on newer vehicles like yours. I attached a picture that I took from the install instructions that covers the trimming as well as a link to an install video that shows it as well.
    view full answer...
    Image 1 for
  • Weight of Curt Trailer Hitch for 2018 Volvo V60
    The Curt Trailer Hitch Receiver # 13266 that fits your 2018 Volvo V60 has a 34 lb shipping weight. This is a Class III, 2 inch hitch with a 3,500 lb towing capacity and 350 lb tongue weight capacity. It has a black powder coat for rust resistance, is made in the USA and comes with a lifetime warranty. To add wiring which will give you a 4-way connector and allow you to power your trailer's lights you need Wiring Harness # C56287. It is also recommended you use Dielectric Grease for Electrical...
    view full answer...
  • Trailer Hitch Recommendation for a 2016 Volvo S60
    The Curt Hitch part # 13266 that you referenced has been confirmed as a fit for your 2016 Volvo S60 so it would work well for you. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch rise or 4 inch drop. It also includes a 1-7/8 inch ball, 2 inch ball, hitch pin with clip, and a storage bag. If the ball mount kit does not include a ball mount with the...
    view full answer...
  • 2015 XC70 Volvo Trailer Hitch Recommendation
    For your 2015 Volvo XC70 the correct hitch would be the part # 13266. This is a 2 inch hitch confirmed to fit your vehicle that would work well. There is a 1-1/4 inch hitch available for your vehicle but I wouldn't recommend it since you plan to do some towing and the 2 inch hitches have more capacity. If you wanted to do some towing you might be interested in etrailer ball mount kit # 989900. It comes with 2 ball mounts; one with a 3/4 inch rise or 2 inch drop and one with a 2-3/4 inch...
    view full answer...
  • Installation Instructions and Torque Wrench for Curt Trailer Hitch 13266 on a 2015 Volvo XC70
    The torque specs for installation of Curt trailer hitch # 13266 for your 2015 Volvo XC70 can be found in the installation instructions I have linked for you. You will need to have a torque wrench that rated up to 45 foot pounds at least such as # ALL944001. I have also linked a video showing an example installation for you.
    view full answer...
  • Trailer Hitch Comparison and Ground Clearance for a 2016 Volvo XC70
    Draw-Tite hitch # 75916 and Hidden Hitch 87674 are identical in every way other than the stickers on them. But Hidden Hitch is actually going away as a brand. Curt hitch # 13266 has a similar design and all 3 hitches will be basically right below the rear fascia. The ground clearance for all of them will be essentially the same with only minute differences if any. When we installed the Draw-Tite hitch on a 2016 Volvo XC70 it measured 14-1/4 inches from the ground to the top o the receiver...
    view full answer...
  • Recommended Trailer Hitch And 4-Bike Carrier For 2012 Volvo XC70
    The Curt Trailer Hitch, part # 13266 will work great on your 2013 XC70. This is a Class lll hitch and it has a 2 inch receiver opening. I have attached a link to an installation video for this hitch you can check out. The distance form the center of the hitch pin hole to the rearmost part of the bumper is 5-3/4 inches. I recommend the Yakima FullSwing 4 Bike Rack, part # Y02465. This bike carrier has a swing-away feature and also has anti-sway cradles that keep the bikes from banging...
    view full answer...
  • Ball Mount Recommendation for 2 inch Hitch that Needs Rise of 6.75 Inches
    For the Curt hitch part # 13266 that fits your 2012 Volvo XC70 the ball mount you'd want would be the Curt # C45338 which has rise of 7 inches. With suspension sag from the tongue weight of the trailer this would put you right where you need to be for the trailer to sit level. I also attached a help article on determining the correct rise/drop ball mount for you to check out as well.
    view full answer...
  • Recommended Trailer Hitch for a 2008 Volvo V70 to Carry the Thule Apex XT
    I recommend going with a Class III trailer hitch with a 2" receiver. This will allow you to gain full use of your Thule Apex XT 4 Bike Rack # TH9025XT on your 2008 Volvo V70 and it will be compatible with more accessories than a 1-1/4" receiver is. Between the Draw-Tite # 75916 and the Curt # 13266 I recommend going with the Draw-Tite option over the Curt as the Curt requires the use a stabilizer strap like part # 18050 for any non-trailer loads per the Curt warranty. I have attached...
    view full answer...
  • Availability of Trailer Wiring Harness for 2015 Volvo V60 Sports Wagon
    We do offer the Curt # C56287 harness for the mid-year model of the 2015 Volvo V60. We do also have trailer hitch receivers for your V60. The link at right will let you see all options, which include both 1-1/4-inch Class II and 2-inch Class III hitches. The most cost-effective hitch offered, Curt Class III hitch # 13266, installs without drilling using included hardware and requires some trimming of the rear fascia. The written install instructions are linked at right along with two...
    view full answer...
  • Hitch Recommendation for 2015 Volvo XC 70
    The Curt Hitch part # 13266 is confirmed to fit your leased 2015 Volvo XC70, this hitch does not require any welding to install. To get an idea of how difficult it would be to install this hitch check out the installation instructions that I attached. You should note that it will be some fascia trimming required to install this hitch, I wouldn't recommend installing a hitch that requires trimming on a leased car.
    view full answer...
  • Recommended Class III Hitch and 4-Way Wiring Harness for 2015 Volvo XC70
    For your 2015 Volvo XC70 I would recommend the Curt # 13266 over the Draw-Tite # 75916. These trailer hitches have an almost identical design. Although the Draw-Tite has a higher towing capacity, it looks like both of the hitches exceed the towing capacity of your vehicle so you will be limited by your vehicle. I would double check the owner's manual to make sure. Both have a concealed cross tube, so you will only see the receiver tube at the back of the vehicle giving it a factory look....
    view full answer...
  • How Does Install of Curt Hitch on 2016 V60 Cross Country Affect Ground Clearance
    The install of the Curt hitch part # 13266 on your 2016 Volvo V60 will reduce your ground clearance by about 3 inches. The install will be identical to what you mentioned seeing in the install video on a 2015 V60 as well. The hitch option we offer that will offer the best ground clearance is the Stealth Hitch part # SH97FRT which has a lower hitch assembly that removes when not in use so that you have a totally unobstructed area.
    view full answer...
  • Comparing Class II and Class III Curt Hitch for 2018 Volvo V60
    Curt offers a Class II hitch part # C12066 and a Class III # 13266 for your 2018 Volvo V60. The big advantage the Class III (2 inch opening) has over the Class II is that more accessories are made for 2 inch hitches so you'll have an easier time fitting racks to the hitch. The advantage a Class II would have is really that the due to the smaller size it might be less visible. The brown Volvo I attached a picture of has the 2 inch hitch and the white has the 1-1/4 inch size mentioned.
    view full answer...
    Image 1 for Image 2 for
  • Concealed Trailer Hitch Fit For 2018 Volvo V60 Cross Country
    I reached out to the manufacturer, who told me they had not test fit the Stealth Hitches Hidden Rack Receiver # SH97FR on a 2018 Volvo V60 Cross Country, so they would not be able to guarantee a fit. That said, we do offer a concealed trailer hitch that I confirmed with the manufacturer will fit your V60 Cross Country, which is from Curt: - Curt Trailer Hitch Receiver # 13266 This hitch has a 2 inch receiver and a completely hidden design, just like the Stealth, with the difference being...
    view full answer...
  • Will the Thule Doubletrack Platform-Style 2 Bike Rack Fit a 2016 Volvo XC70
    Yes, the Thule Doubletrack Pro XT Bike Rack part # TH92BJ would be perfect for a 2016 Volvo XC70 using a trailer hitch like the Curt Trailer Hitch Receiver part # 13266 which is an excellent USA made option.
    view full answer...
  • Carrying a 231 Pound Motorcycle on a 2014 Volvo S60 with 165 Tongue Weight Capacity
    Tongue weight is the downward force put on a hitch by whatever it is carrying. When you're using a hitch for a carrier, like the cargo carrier you're getting or a bike rack, all of the weight on the hitch is tongue weight. The etrailer Motorcycle Carrier, part # e98873, weighs about 58 pounds itself. So between it and the 231 pound motorcycle combined the tongue weight you're trying to carry is about 289 pounds. If your Volvo has a 165 pound maximum tongue weight then you're way over...
    view full answer...
  • Does Curt Hitch for 2011 Volvo XC70 Increase Tongue Weight Capacity
    With any towing setup you are only as strong as your weakest component as that would be the component that would fail if overloaded. So even though the Curt hitch part # 13266 has a tongue weight capacity of 350 lbs you'd still be limited to 160 lbs since thats what your 2011 Volvo XC70 is rated for. The reason the hitch is rated higher than the vehicle is because the engineers at Curt designed a hitch to fit the vehicle and then tried to make it as strong as possible and then independently...
    view full answer...
  • Differences Between Curt Class II # C12066 and Class III # 13266 for 2015 Volvo V60
    The two hitches you mentioned are very similar. The only difference is that the # 13266 is a Class III which uses the 2 inch square receiver opening and the # C12600 is a Class II which uses the 1-1/4 inch square receiver opening. Both hitches have a 3500 lb towing capacity, but the Class III has a tongue weight capacity (maximum weight that can be suspended from hitch without damaging anything) of 350 lbs, versus 300 lbs for the Class II. The Class II hitch will have a ground clearance...
    view full answer...
  • Trailer Hitch Receiver Height and Ground Clearance on 2012 Volvo XC70
    The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 75916 will give you a hitch height of 14-1/4 inches from the ground to the inside top of the receiver. That means you will have a ground clearance of 11-3/4 inches at the hitch. The Curt Trailer Hitch Receiver - Custom Fit - Class III - 2" # 13266 will be slightly shorter at 13-1/2 inches to the inside top of the receiver giving you 11 inches ground clearance at the hitch. If you will be towing with this hitch,...
    view full answer...
  • Trailer Hitch for a 2014 Volvo S60 to Use a Platform Bike Carrier
    It is possible for you to come by and visit us here in Wentzville. If you want us to install the trailer hitch you would want to call customer service and set up an appointment. In many cases we can perform installations for free. When you call they can offer you more details. In the mean time the hitches for your 2014 Volvo S60 do require some fascia removal and trimming. Removing the fascia just takes some time and the area that needs to be trimmed is not very large. Take a look at the...
    view full answer...
  • What Part of the Bumper Fascia Requires Trimming on a 2010 Volvo XC70 to Install a Trailer Hitch
    The fascia is the plastic bumper cover. The bumper is actually the structural support that sits behind the bumper fascia. I have attached the installation instructions that explains what trimming is required to install the Curt Trailer Hitch, # 13266, on your 2010 Volvo XC70. I have also attached a photo of the step that shows were to cut. showing where the fascia is trimmed when installing a trailer hitch on the Volvo XC70. As you can see, only the underside of the fascia is trimmed, so...
    view full answer...
    Image 1 for
  • Maximum Tongue Weight For 2009 Volvo XC70
    When trying to figure out the maximum tongue weight, or maximum trailer weight for a vehicle such as your 2009 Volvo XC70 you are limited by which ever rating is lower between the vehicle and trailer hitch receiver. In this case the Curt Trailer Hitch Receiver # 13266 has a maximum tongue weight rating of 350lbs, but the vehicle has a maximum tongue weight rating of 165lbs, so you are limited to a maximum tongue weight of 165lbs. If the trailer hitch receiver were to have a maximum...
    view full answer...


< Previous
12



Do you have a question about this Trailer Hitch?


Info for this part was:

Employee Mike L
Expert Research:
Mike L
Employee Michael H
Expert Research:
Michael H
Employee Jameson C
Expert Research:
Jameson C
Employee Jeffrey L
Expert Research:
Jeffrey L
Employee Zack K
Video Edited:
Zack K
Employee Joshua S
Video Edited:
Joshua S
Employee Jacob T
Video Edited:
Jacob T
Employee Lindsey S
Written by:
Lindsey S
Employee Chris R
Video by:
Chris R
Employee Michael B
Video by:
Michael B
Employee Wilson B
Updated by:
Wilson B
Employee Amanda M
Updated by:
Amanda M
Employee Kristina F
Updated by:
Kristina F
Employee Isabelle B
Updated by:
Isabelle B
Employee Jared G
Test Fit:
Jared G
Employee Robert C
Test Fit:
Robert C

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.