Replace broken or worn-out weather stripping around your doors and hatches on your RV before water damage creates a costly headache. Peel-and-stick adhesive is pre-applied for an easy DIY installation.
Features:
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com and today we're gonna take a look at this etrailer stick-on rubber hollow bulb seal for RV and trailer doors. With this stick-on rubber seal, you are going to be able to replace your broken or worn out weather stripping around your doors and hatches on your RV before water damage creates a costly headache for you. Now this is a peel and stick installation with pre-applied acrylic adhesive backing. Of course, surface preparation is recommended to remove any old adhesive and then you're just going to simply remove the backing, as I did here, and apply the seal to the frame of your RV using scissors to trim any extra seal. And this will set in about eight hours.
This is made here in the USA of E-P-D-M rubber. This is not going to shrink or crack or fade over time and this is going to be resistant to UV damage as well. So let me pull out my ruler here real quick and just go over some measurements with you. So looking at the overall width, we are sitting pretty close to 3/4 of an inches, 3/4 of an inch rather. And then looking at the height, we're sitting right at about 9/16 of an inch tall.
And what I have here on my table is a 15 foot bundle but we do also sell this in a 25 foot and a 50 foot bundle as well. So depending on which length is going to be best for your application, you can just take the item number of the length that you need that you see there on your screen, put it in the search field of our website, and that will take you to the length that you are looking for that's going to be best for your situation. Well, that's gonna conclude our brief look today. I do hope that it was helpful for you. Again, my name is Andy.
Thank you for joining me.
Average Customer Rating: 4.2 out of 5 stars (9 Customer Reviews)
Replace broken or worn-out weather stripping around your doors and hatches on your RV before water damage creates a costly headache. Peel-and-stick adhesive is pre-applied for an easy DIY installation.The experiance purchasing the roof garnish for my trailer was excellent even though i made a mistake first time an ordered the wrong one ,they made it easy to send them back and reorder the new ones a five star exsperiance
Replaced original. Easy install, good s eal.
Very good weather seal, easy to apply, customer service was excellent
Easy to install on our camper door. Had a ripped seal on the door.
Ordered in October 2022 and have not received as of February 2, 2023 because of back order. Not acceptable!
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.