Magnetic Tow Lights - Red LEDs - 4-Way Flat Connectors - 20' Long Harness

See what our Experts say about this Peterson Tow Bar Wiring

• How to Route Tow Bar Wiring to Rear of 2019 Kia Soul
  When installing a wiring kit like the Roadmaster Diode Flexo-Coil # RM-15267 on your 2019 Kia Soul the best way to run the wires to the rear tail lights is to route them under the vehicle between the underbody covers, securing it at various locations with zip ties while being sure to avoid any moving parts or areas that emit a lot of heat. I have attached an install video for this particular kit on the 2015 Kia Soul that you can follow along with. If you'd rather not perform this kind...
  view full answer...
• No Splice Flat Tow Wiring Solution Recommended for 2019 Jeep Cherokee
  I do have a wiring solution that won't require you to cut or splice into your Jeep's electrical system, however, there isn't a plug and play harness that will allow you to use your Jeep's taillights. Your best option is to go with a set of magnetic lights, like part # PE26UR. This light kit simply plugs into your existing 4-Pole Flat trailer connector and can be easily mounted to any metal surface on your 2019 Jeep Cherokee Overland. Keep in mind that even if you were to use a hardwire...
  view full answer...
• Parts Needed to Flat Tow a 2007 Honda Fit Behind a Motor Home with an Aventa Tow Bar
  In order to determine if your 2007 Honda Fit can be flat towed behind a motor home you will want to consult the vehicle owners manual. Since you have an automatic transmission you will need to use base plates # 521558-1. Blue Ox does not have a base plate kit for the automatic transmission models. You can still use your Aventa tow bar by using adapter # BX88178. If you need safety cables, use # RM-643. For a lighting solution I recommend kit # 154-792-118158. Most states now require...
  view full answer...
• Parts Needed to Flat Tow 2016 Jeep Wrangler Unlimited
  We can help you select the required components to allow you to safely and legally flat tow your 2016 Jeep Wrangler Unlimited behind your RV. You may care to check out the articles I have linked for you which cover the essentials of flat towing. Parts needed include base plates, safety cables, a tow bar, a braking system, a lighting/wiring kit, a high/low hitch adapter and a wiring extension for easier RV hookup. Base plate selection for your Wrangler Unlimited depends on how it is equipped....
  view full answer...
• Is Peterson Magnetic Tow Lights PE26UR Compatible with 2015 Nissan Frontier Pickup
  It certainly will. The Peterson # PE26UR will work perfectly for you. I'll link you to a product demonstration video featuring the lamps in action.
  view full answer...
• Base Plates and Accessories to Flat Tow 1991 Mazda Miata with Pace Arrow 37C
  Assuming that you're using a Blue Ox tow bar, the parts you've mentioned would all be compatible. The # PE26UR lighting system would work well for your application. You'd also need safety cables like part # RM-645 if you don't have them already. Most states also require that the flat towed vehicle be equipped with a supplemental braking system, like theBlue Ox Patriot 3 # BLU37TR. I'll link you to some articles about flat towing that you might find helpful.
  view full answer...
• Recommended Items Needed For Flat-Towing A 2014 Ford F-150
  You can use the Falcon 2, part # RM-520 to tow your F-150. The tow bar has a 6,000 lb limit so you will be within the capacity. If you do not have the base plates you can check out the attached link to our product page for the base plates we offer for your truck. If you do not have EcoBoost on your truck you can use part # 495-1A. If you do have EcoBoost on your truck the base plates that will work are part # RM-524431-5. Since you have already been flat-towing you probably have the...
  view full answer...
• Parts Needed to Flat Tow a 2007 Honda Fit Behind a Motor Home
  First, be sure to consult the Fit owners manual to determine if and how your Fit should be towed. Yes there are base plates for the 2007 Honda Fit from Blue Ox but only if it is a manual transmission. You would use # BX2252. For a compatible tow bar I recommend the Avail # BX7420. It also comes with safety cables. For a lighting solution I recommend the Roadmaster wiring harness # 154-792-118158. Most states now require a supplemental baring system on the vehicle being flat towed. I...
  view full answer...
• Can a 2013 Honda Fit be Flat Towed Behind a Motorhome
  I have a copy of the 2013 Honda Fit Owners Manual that I found online, and it states that both manual and automatic transmission equipped Fit models can indeed be towed behind a motorhome IF the specific procedures shown are followed. You can find this information by checking your manual. Be sure to read the instructions carefully and completely, as they're pretty specific and if they aren't followed to the letter, you can damage the drivetrain of your Fit. I looked through several online...
  view full answer...
• Will Stay-IN-Play DUO Braking System Work With 2008 Saturn Aura XR
  Yes, the SMI Stay-IN-Play DUO Supplemental Braking System # SM99251 will work with your 2008 Saturn Aura. Along with a supplemental braking system there are a number of other parts required to flat tow your vehicle, and I'll list the recommended products for you. - Base Plate Kit: Roadmaster EZ Base Plate Kit # 523145-1 - Tow Bar: Roadmaster Falcon All Terrain Tow Bar # RM-522 - Safety Chains: RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643 - Wiring Kit: Magnetic Tow Lights...
  view full answer...
• How Tall Is The Peterson Magnetic Tow Lights
  The Peterson Magnetic Tow Lights # PE26UR is an acceptable solution if your tail lights are blocked as these lights provide stop, left/right turn signals, as well hazard functionality; additionally, these lights are approximately 6.9 inches tall. Additionally, you may want to try the Curt Auxiliary LED Indicator Lights # C53201 which are specifically designed for this.
  view full answer...
• Recommended Removable Flat Tow Light Kit For 2016 Jeep Wrangler Soft Top
  I may have another option, but we do not carry the Custer Ez Mount EZT20B that use a mounting flap. We have had customers use the Peterson Magnetic Tow Lights # PE26UR on their Jeeps by attaching the magnet to the body right next to the tail light housings. I included a picture of the lights used this way on a Jeep Wrangler for you to take a look at. This would be a great removeable option for your 2016 Jeep Wrangler with a soft top as it would still allow you to easily remove the lights...
  view full answer...
  
• Recommended Secondary Light System for use When Using Bike Rack with Cover
  I have a solution for you, but there isn't a directly compatible or solution designed specifically for the Thule EasyFold XT # TH903202. However, you could definitely use something like the Peterson Magnetic Tow Lights - 4-Way Flat Connector - 20' Long Harness # PE26UR if you've got a 4 way wiring harness on the back of your 2020 Mercedes-Benz GLE. These are magnetic towing lights that could be attached to the carrier or your vehicle to provide stop, turn, and tail light functions. If...
  view full answer...
• Base Plates for Flat Towing 2014 Ford Fusion SE Hybrid
  The base plate fits for your 2014 Ford Fusion Hybrid will depend on the version of the vehicle that you have. If you have the SE model (with no adaptive cruise control) you can use Blue Ox Base Plate Kit # BX2646. All base plate fits are shown on the linked page. Select your SE Hybrid vehicle style from the drop-down menu to see your options. (Choose either SE Hybrid with adaptive cruise control or without it.) The linked article on flat towing will give you information on all of the...
  view full answer...
• Parts Needed to Flat Tow a 2011 Nissan Versa
  A complete flat towing setup typically consists of base plates, a tow bar compatible with your base plates, safety cables, tow bar wiring, supplemental braking and a high/low adapter; it sounds like you already have a supplemental braking system but we can help you locate the other parts. Typically your base plates will dictate your tow bar, and you have 2 options for base plates in the Roadmaster # 52347-1 and the Blue Ox # BX1845. Both provide you with removable arms so that your vehicle...
  view full answer...
• Gauge Wire for Extending Harness of Peterson Magnetic Tow Lights # PE26UR
  The wiring of the Peterson magnetic tow lighting kit part # PE26UR is 16 gauge so using 16 gauge or heavier would work well. The best method for splicing would be soldering with heat shrink over the splice.
  view full answer...
• Is There A Plug In Tow Bar Wiring Kit For My 2021 Jeep Wrangler Unlimited?
  We do have magnetic towing lights, like the Peterson Magnetic Tow Lights # PE26UR, that will be fully plug and play. However, if you wanted to use the taillights on your 2021 Jeep Wrangler Unlimited, it will require some cutting and splicing. With that said, the Tow Ready Tail Light Isolating Diode System # TR118821 will include all the wiring and spade connectors to accomplish this. Said spade connectors make the install, and removal if ever needed, a lot easier. This will also have plenty...
  view full answer...
  
• Parts Needed to Tow a 2013 Kia Optima on a Tow Dolly
  I checked the online manual for your 2013 Kia Optima and didn't see anything about recreational dolly towing, only emergency dolly towing. While the manual didn't give any distance restrictions for dolly towing it is always best to confirm whether it is safe or not with a Kia dealer. If it is okay then you simply need a tow dolly and then some lights. Tow dollies tend to have lights on them but it helps to have some extra lights to make sure people around you can tell what you are doing. For...
  view full answer...
• Only One Brake Light is Working with the Peterson Magnetic Tow Light Kit
  You will want to verify that both brake light signals are working at the RV side trailer connector. Unplug the Peterson Magnetic Tow Lights # PE26UR, and use a circuit tester such as # PTW2992 to test the pins on the 4-Way while someone sits in the RV and runs through the lighting functions. The most likely cause of this is a bad ground or dirt/corrosion in the trailer connector on the RV. It would take a very small wire brush or small screwdriver to clean on the 4-Way. This recently...
  view full answer...
• Is There a Light Kit for the Swagman XP Bike Rack?
  Since the Swagman XP # S64960 is made of steel, you can attach magnetic lights to the carrier. For this route, I recommend the Peterson Magnetic Tow Lights - Red # PE26UR. The Peterson lights serve as running lights, brake lights, and turn signals on your bike rack. For installation, the wires will install right into the four-way wiring harness on your 2017 Subaru Outback. If you need a harness, I recommend the Curt T-Connector Vehicle Wiring Harness # C56040. The harness I suggested is...
  view full answer...
• Parts Needed to Tow 2013 Ford C-Max with 2001 Ford F-250
  In order to tow your 2013 Ford C-Max behind your 2001 Ford F-250 you'll need a tow bar, base plates, safety cables and magnetic tail light kit. To start, I recommend that you use the Roadmaster StowMaster Tow Bar - Car Mount - 2" Ball - 6,000 lbs # RM-501 and the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms # 524432-1, which will work well together and provide you with the base parts needed to tow your C-Max. You'll also need a set of safety cables like the # RM-643 and some...
  view full answer...
• Can 2014 Kia Soul with a Manual Transmission Be Flat Towed
  I did some checking and your 2014 Kia Soul with a manual transmission can be flat towed. Your Roadmaster tow bar can be used but you will need a new base plate kit as they are all custom fit for specific vehicles. For a base plate kit you'd need the # RM-522114-4. Aside from that most of the flat towing components from your old vehicle can swap to the Soul but it really depends on what you have. If it's a universal lighting system like the part # RM-2120, that will easily fit the Soul....
  view full answer...
• Magnetic Tow Bar Lighting Recommendation for 2016 Ford F-150
  The tow bar lighting kit part # PE26UR that you referenced is a universal kit that can basically fit any vehicle, and it attaches to any metal surface with a magnet. You could also take a look at the part # TL21RK which is also a universal kit that could easily attach to the bumper or bed rails or any magnetic surface.
  view full answer...
• Availability of Plug-In Tow Bar Wiring for a 2016 Ram 1500
  Unfortunately, TowDaddy hasn't released the 2016 fits yet, but we do have a magnetic tow light options that will bypass the vehicle wiring, like # C6304 or # PE26UR.
  view full answer...

Do you have a question about this Tow Bar Wiring?