Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord
Item # DM9523010-54
Our Price: $257.67
Confirmed to Fit
2015 Toyota Corolla
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (55)
- Q & A (0)
- Photos
2015 Toyota Corolla - Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Demco
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your Toyota Corolla tail lights. Includes coiled 7-way to 6-way cable and 6-way car-side socket.
Features:
- Diodes display your RV's brake and turn signasl lights to your towed vehicle's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along the same wire
- Prevents feedback that can damage your vehicle's electrical components
- Resists corrosion with heat-sealed casing
- 7-Wire to 6-wire adapter cable lets you easily run power from your motorhome to your towed vehicle
- Coiled to prevent dragging and tangling
- Resistant to water, oil, and chemicals, with vinyl coating and silicone-injected plugs to prevent corrosion
- 6-Way socket hardwires to towed car and mounts on the front bumper
- Kit includes:
- 4 Diodes
- 4-Wire harness
- 7-Way to 6-way adapter cord
- 6-Way socket
- Wire connectors
- Cable ties
- 1 Ring terminal
- Made in the USA
Specs:
- Wiring harness length: 26'
- Wire gauge: 16
- Adapter cord extended length: 7'
- 1-Year warranty
Separate vs. Combined Lighting Systems
This kit will display on your towed car as a combined lighting system - also known as a 2-wire system. A combined lighting system uses the same light bulb to signal both braking and turning (in other words, the car signals a turn by flashing the brake light, while a separate/3-wire system light up independently of each other. Add a wiring converter (118158 - sold separately) and 2 additional diodes to get a separate lighting system.
Do I Need a Brake Light Relay?
Because your vehicle has a combined lighting system - wherein the brake signals and the turn signals are carried on a single wire - a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
9523010 Demco Tail Light Wiring Kit
9523054 Demco Trailer Connector Adapter - 7-Way to 6-Way - 7' Cord
Installation Details
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Product did not meet expectations
- Wrong item was ordered
- Too difficult to install
Customer Reviews
Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord - DM9523010-54
Average Customer Rating: 4.8 out of 5 stars (55 Customer Reviews)
This complete kit includes everything you need to correctly display your RV's brake and turn signals on your vehicle tail lights. Includes coiled 7-way to 6-way cable and 6-way car-side socket.by: Nicholas07/11/2023
etrailer was extremely helpful in getting me parts to flat tow our 2023 Jeep Wagoneer. More specifically, Noah took the time to research the required parts, offer technical guidance, and follow up to ensure I was taken care of. Top notch service which was much appreciated.
by: Paul 03/20/2023
2023 Jeep Wrangler Unlimited
Needed new wiring and diodes for my 2023 Jeep Rubicon. ETrailer makes it so easy to set up all the wiring for flat towing.
by: Louis02/28/2022
Jeep Wrangler
This kit was fairly easy to install on a 2021 Jeep Wrangler. If you use this kit to set up a Roadmaster Nighthawk tow bar you do not need the 7-wire to 6-wire coil connector as the tow bar comes with it. Get a 4 diode wire kit without the coil connector and save money.
by: Todd 11/17/2021
Works great, to charge battery of toad you need to change the 12v power from center to match the towed vehicle or wire up towed car to center post 12v
by: John 10/19/2022
Took time to do the wiring, but once done it works great!
by: James 07/17/2020
EASY install and quick service
by: John09/29/2021
Jeep Cherokee
The salesman was very helpful picking the correct setup for my Cherokee, easy to install, looks and works great
by: Tom 08/14/2022
2017 Cadillac Escalade
Great products and quick delivery.
by: Harry02/17/2022
Harry
2/19/2023
Great
by: Joseph 11/09/2021
Works as advertised , however I feel the braking is more abrupt than gradual ..
by: Gerald 01/11/2022
Works great 1 year and still working pe rfectly
by: Customer F01/18/2022
Works great, no issues
by: Jeffrey02/20/2022
Good quality.
by: Meg 08/24/2021
Exactly what I needed
by: Robert 05/10/2021
Work out excellent
by: Tom09/08/2021
The parts came quickly and they were exactly as described
by: Albert02/02/2024
by: Ken 06/22/2023
by: Bill06/26/2020
excellent service
by: James 04/17/2024
by: David 07/11/2021
Very fast service!
by: Mark 03/25/2024
by: Ronald 09/23/2022
by: Gary11/18/2023
by: Rob 04/25/2024
2020 Jeep Gladiator
25
55
Show More Reviews
See what our Experts say about this Demco Tow Bar Wiring
- Demco Universal Towed Vehicle Wiring Kit for 2021 Jeep WranglerI would be happy to help make a wiring recommendation for your 2021 Jeep Wrangler. I recommend the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector item # DM9523010-54. This complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system. The diodes prevent electrical feedback and the damage it can cause to your car's electrical components.
view full answer... - Demco Base Plate And Tow Bars For Flat Towing a 2021 Chevrolet TahoeThe Demco Tabless Base Plate Kit # DM9519342 is the base plate that will fit your 2021 Chevrolet Tahoe. I recommend using the Demco Excali-Bar III Non-Binding Tow Bar # DM9511013 to connect your Tahoe to the tow vehicle. You will need the Demco 4-Diode Universal Towed Vehicle Wiring Kit # DM9523010-54 to allow your Tahoe tail lights to function so that you do not have to use magnetic lights that tend to easily get damaged. A Roadmaster Automatic Battery Disconnect # RM-766 will allow...
view full answer... - Does 2020 Buick Envision Need Brake Light Relay and Which is Easier Blue Ox or Roadmaster SetupDoes our Allegro have trailer wiring already present at the rear of the vehicle? Like with a 7-way connector? If so the circuits are already combined regardless of what you see on the vehicle taillights. If you plan to use a diode kit or bulb and socket tow bar lighting solution you will need a brake light relay like # RM-88400 when using the brake system you mentioned so that the brake lights won't override the blinkers. It's a toss up on which is easier to use between the Roadmaster...
view full answer... - Can I Flat Tow a 2021 Jeep Wrangler with a Smittybilt SRC Front bumper?The Smittybilt SRC Front bumper on the 2021 Jeep Wrangler has 3/4" thick d-rings so you can use the Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars Item # RM-035 to tow with the D-rings on your bumper. To flat tow your 2021 Jeep Wrangler you will also need, a tow bar, safety cables, supplemental braking system, wiring and possibly a high low adapter. Tow Bar- Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar item # RM-422 Safety Cables- RoadMaster...
view full answer... - Base Plates & Wiring For 2024 Chevy Trax For Flat TowigHi Yves, We do have base plates, wiring, and the other parts needed to dinghy tow your 2024 Chevy Trax, and I'll go ahead and list out all the parts for you to make it easy to order. - Base Plate Kit: Demco Tabless Base Plate Kit # DM59YV - Tow Bar: Demco Commander II Non-Binding Tow Bar # DM9511012 - Wiring Kit: Demco 4-Diode Universal Wiring Kit for Towed Vehicles # DM9523010-54 - Supplemental Braking System Motorhome with HYDRAULIC Brakes: Demco Stay-IN-Play Duo Flat Tow Brake...
view full answer... - Difference Between Blue Ox and Demco Wiring Kit for Flat Towing 2019 Jeep WranglerThere is really only one difference between the Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54 and the Blue Ox Tow Bar Wiring Kit # BX8848, which is that the Demco comes with the 7-Wire to 6-Wire cord as well as a vehicle-side 6-way while the Blue Ox kit requires those be purchased separately. So if you were to go with the Blue Ox Tow Bar Wiring Kit # BX8848 you would also need the Blue Ox 7-Wire to 6-Wire, Coiled Electrical Cord...
view full answer... - Complete Flat Towing Setup for a 2015 Kia SoulI would be happy to help you find those parts so you can flat tow your 2015 Kia Soul. For a manual transmission you will need a baseplate, tow bar with safety chains, supplemental braking system, wiring harness, and a battery charge line. I have attached numerous installation videos to help guide you through installing these parts. Tow Bar: For a tow bar, I recommend the Blue Ox Alpha Tow Bar item # BX7380 which comes with the safety cables you need. You should also add the Blue Ox Base-Plate...
view full answer... - Best Parts to Flat Tow 2021 Kia Soul With Manual TransmissionThere are a number of parts you will need in order to flat tow your 2021 Kia Soul with a manual transmission, and I'll be happy to recommend the best parts that are the easiest to use for you. The best parts for you are the following: - Base Plate Kit: Blue Ox Base Plate Kit # BX2727 - Tow Bar: Blue Ox Alpha 2 Tow Bar # BX7380 - Wiring Kit: Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54 - Supplemental Braking System: Demco SBS Stay-IN-Play...
view full answer... - All Parts Needed to Flat Tow 2011 Jeep Wrangler With Standard BumperWe can get you set up with all the parts needed to flat tow your 2011 Jeep Wrangler with a standard factory bumper. There are a number of parts you'll need so I'll go ahead and list them out for you to make it easy to order: - Base Plate Kit: Demco Tabless Base Plate Kit # DM9519292 - Tow Bar: etrailer SD Non-Binding Tow Bar # e34ZR - Wiring Kit: Demco 4-Diode Universal Towed Vehicle Wiring Kit # DM9523010-54 - Roadmaster Automatic Battery Disconnect # RM-766 - Supplemental Braking...
view full answer... - 2018 Chevrolet Equinox Flat Tow Wiring NeedsThe Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54 is going to allow you to run your vehicles existing 4 pole harness to the front to connect to your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system. If you already have the wiring you need the Mighty Cord Trailer Connector Adapter - 4-Way Flat to 6-Way Round # A10-6034VP and the Hopkins Heavy-Duty, Coiled Trailer Connector Adapter - 7-Way to 6-Pole Round...
view full answer... - Recommended Flat Towing Components For A 2024 Chevy Trax Hi John, Yes, we do have everything you'll need to flat tow your 2024 Chevy Trax. Baseplate: Blue Ox Base Plate Kit # BLU24UR. Tow Bar: etrailer SD Non-Binding Tow Bar for Blue Ox Base Plates # e47ZR. This tow bar comes with safety cables included and has an adjustable head to help keep the tow bar level between the motorhome and Trax. Tow Bar Wiring Kit: Demco 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Adapter Cord # DM9523010-54. This diode kit will transfer...
view full answer... - Tow Bar Lighting Kit That Fits 2018 Ford EdgeThe Hopkins Tow Bar Lighting Kit part # HM56011 is a confirmed fit for the Sport and Titanium models of your 2018 Ford Edge but not the other models. If you have one of the other models you'd need a diode kit like the part # DM9523010-54. For your tow vehicle that does not have air brakes the DUO part # SM99251 that you mentioned would be a great option. Our installers prefer this system to all of the other permanent install options because of how well it works and how much easier it...
view full answer... - Is the Demco 4-Diode Universal Towed Vehicle Wiring Kit Offered Without 7 to 6-Way CordYes, the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector part # DM9523010-54 is available without the umbilical cord using the Demco 4-Diode Universal Towed Vehicle Wiring Kit part # DM9523010. If you need the 6-pole as well you can get this with part # PK11609.
view full answer... - Roadmaster Crossbar-Style Vs. Direct-Connect Base Plate Kits for 2021 Jeep Wrangler UnlimitedThe biggest difference between the Roadmaster Crossbar-Style Base Plate Kit # RM-521453-4 and the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5 for your 2021 Jeep Wrangler Unlimited is going to be the style of tow bar that you can use. The Crossbar-Style Base Plate Kit # RM-521453-4 will allow you to use a tow bar like the etrailer SD Non-Binding Tow Bar for Roadmaster Crossbar-Style Base Plates # e44ZR. The Direct-Connect Base Plate Kit # RM-521453-5 will allow you to use a tow...
view full answer... - Comparing Base Plate Kits for a 2019 Ford ExpeditionThe best base plate kit for a 2019 Ford Expedition is the Demco Tabless Base Plate Kit part # DM9519318 because it does not have any sort of cross tube that attaches the two side together unlike the Roadmaster Direct-Connect Base Plate Kit part # RM-524457-5 or Blue Ox Base Plate Kit part # BX2678. The lack of a cross tube is going to limit the amount of modifications that are needed which then reduces install time as well so this is really the best route to take. Furthermore, the Demco...
view full answer... - Recommended Flat Towing Set Up for a 2024 Buick Encore GX Yes, it will. The Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System item # RM-766 is not only compatible with your 2024 Buick Encore GX but it is recommended to be used by Roadmaster. This a great part that makes disconnecting and reconnecting your battery extremely simple. Here are some other parts you will need to flat tow your 2024 Buick Encore GX: Tow Bar and Safety Chains - Blue Ox Alpha 2 Non-Binding Tow Bar 2" Hitch - 6,500 lbs item # BX7380 Base...
view full answer... - Flat Tow Parts for 2021 Jeep Wrangler Using etrailer Invisible Base Plate KitThe etrailer Invisible Base Plate Kit with Removable Arms, # e98948 does not include safety chains. This is a custom-fit base plate that provides the needed attachment points for your tow bar. With this option, the tabs remain on tow bar arms and easily secure to base plate receivers with a quick turn. It is a simple, bolt-on installation with included hardware. For a complete flat tow kit for your 2021 Jeep Wrangler, you will also need the tow bar, safety chains, a wiring solution for...
view full answer... - Troubleshooting A Non-Working Light Function With Diode WiringSince the diodes in the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54 use spade terminal connectors the easiest way to test the diode would be to swap the connections on the diode in question and test your light functions to see if the terminal on the diode is the issue. If it randomly stopped working then the cause is typically just a loose connection or a bad ground so I would check the connections and make sure there's no damage...
view full answer... - Best Base Plate For 2021 Jeep Cherokee Trailhawk We can definitely help you out with the best base plate for your 2021 Jeep Cherokee Trailhawk. The best option, due to the fact it will give your Cherokee the cleanest look when you aren't flat towing and is a bolt-on installation that doesn't require any drilling, is the following: - etrailer Invisible Base Plate Kit # e98951 This will fit your '21 Cherokee Trailhawk and give you a start to your flat towing set up. Along with the tow bar you'll also need other parts, including a compatible...
view full answer... - Recommended Flat Towing Equipment For A 2021 Jeep Wrangler Sahara 4XEIf you went with the etrailer Invisible Base Plate Kit - Removable Arms Item # e98948 you would need to also get an adapter so I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms Item # RM-521453-5 instead. The Blue Ox Patriot Portable Braking System - Proportional Item # BLU37TR will work with your Jeep and I recommend installing the 12 Volt Outlet Kit, 20 amps Item # RM-9332 to have a dedicated 12v outlet to power it. The Demco 4-Diode Universal Towed Vehicle...
view full answer... - Tow Bar and Flat Tow Parts Needed for Heavy 2020 Ram 3500We can definitely get you a flat tow set up for your 2020 Ram 3500. These trucks are heavy, but the GVWR you are referring to is the gross weight, which is the max weight it can be when loaded with passengers and cargo. According to my research, a 2020 Ram 3500 has a curb weight (unloaded) of up to just over 7,500 lbs max. So even if you have some cargo in the truck, it is difficult to imagine you will be exceeding the 10,500 lb tow bar option you can use with a 2 inch hitch on your motorhome,...
view full answer...
- Recommended Tow Dolly For A 2010 Ford Ranger The online manual for a 2010 Ford Ranger doesn't list anything about dolly towing the vehicle but does state that manual transmissions can be placed in 2WD and flat towed, so you're more than likely fine to dolly tow your Ranger, but I recommend double-checking with your local Ford dealership to ensure there isn't anything else that would prevent you from doing so. If you haven't purchased your tow dolly yet then I recommend the Demco Kar Kaddy X Tow Dolly w/ Disc Brakes # DM9713093....
view full answer... - How To Install Tow Bar Wiring On Vehicle With Separate Brake Signal And Turn Signals When installing tow bar wiring on a vehicle with separate brake and turn signals that will be flat towed you would want to use a diode kit like the Demco 4-Diode Universal Towed Vehicle Wiring Kit w/ 7-Wire to 6-Wire Coiled Connector # DM9523010-54. When installed it will make your brake lights flash as the turn signals instead of your actual amber turn signals when being flat towed. If you wanted to keep the separate wiring for flat towing you would need the Vehicle to Vehicle Tail Light...
view full answer... - Does Flat Towing 2016 Ram 1500 Require Brake Light Relay With Demco 7-Wire to 6-Wire ConnectorYour 2016 Ram 1500 will not require a brake light relay, the RV turn signals will not override the brake light when you are using the Demco 4-Diode Universal Towed Vehicle Wiring Kit with 7-Wire to 6-Wire Coiled Connector # DM9523010-54.
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Edited by:
Lindsey S
Expert Research:
Jameson C
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Jonathan Y
Updated by:
Wilson B
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Written by:
Kristina F
Video by:
Jacob H
Video by:
Aidan B
Video by:
John S
Video by:
Thomas T
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
James
7/17/2021
Works great we use it at least monthly to pull our Jeep gladiator behind the RV no issues at all