Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
Item # RM-152-98146-7
Our Price: $181.01
Confirmed to Fit
2004 Honda CR-V
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (252)
- Q & A (0)
- Photos
2004 Honda CR-V - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Roadmaster
- Universal
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.
Features:
- Complete wiring kit lets you connect your RV's tail, brake, and turn signal lights to your towed vehicle's lighting system
- Wires towed car as a combined lighting system so that brake and turn signals travel along same wire
- Diodes prevent electrical feedback and the damage it can cause to your car's electrical components
- 7-Wire to 6-wire adapter cord allows you to run power from your RV to your towed vehicle
- Straight cord is ideal for all-terrain tow bars and other tow bars that have channel guides
- 6-Way socket wires to harness and mounts on towed car with included bracket
- Sturdy, durable construction
- Powder-coated aluminum casings protect diodes from corrosion
- Electrical cord resists water, oil and chemicals
- Silicone-injected plugs prevent corrosion
- Kit includes:
- 4 Hy-Power diodes
- Wiring harness
- 7-Way to 6-way adapter cord
- 6-Way socket with mounting bracket
- Wire connectors
- Cable ties
- 1 Ring terminal
- 3' Long plastic loom
- Brake light relay (RM-88400 - sold separately) may be required if used with supplemental braking system
- Limited Lifetime Warranty
Specs:
- Maximum amperage: 85 amps
- Maximum voltage: 24 volts
- Adapter cord length: 6-1/2'
- Wire gauge: 16
- Wiring harness length: 30'
Note: For applications that have separate lighting, this kit will cause your brake lights to function as both brake and turn signal lights. A wiring converter (118158 - sold separately) and 2 additional diodes will be needed if you want to retain separate turn and brake signals.
Separate vs. Combined Lighting Systems
Some automobiles operate on a 3-wire system, wherein the brake signal and the turn signals travel along different wires to illuminate different lights. (Typically, these vehicles have amber turn signals.) This is referred to as a "separate lighting system". When you hook up for flat towing using this kit, your towed car's lighting system will operate in a combined fashion regardless of whether it typically has combined or separate lighting. This means that the brake and turn signals sent by your RV to your towed car will be carried on a single wire. As a result, your car's brake lights will do the flashing for the turn signals. Your vehicle will still function as designed when not hooked up to your RV.
Do You Need a Brake Light Relay?
Because this kit wires your vehicle as a combined system, a brake light relay (RM-88400 - sold separately) may be required if you use a supplemental braking system with your towing setup. A supplemental braking system depresses the brake pedal in your towed car every time you apply the brakes in your RV. So, if your towed car's brake lights illuminate when the brake pedal is pressed and the engine is off - as is the case when towing - then you need to install a relay to ensure that the lights on your towed car always act in accordance with the signals sent by your RV via the wiring harness. Without a relay, the brake signal from your towed car will override the turn signal sent by your RV when you slow down to make turns, creating a potential hazard.
RM-152 Roadmaster Universal Hy-Power Diode Wiring Kit
RM-98146-7 Roadmaster Wiring - Straight 6 to 7 - 78" Long
Installation Details
Customer Satisfaction Score:
96% were satisfied with this product
4% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord - RM-152-98146-7
Average Customer Rating: 4.7 out of 5 stars (252 Customer Reviews)
This complete kit includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and wire your car to operate as a combined system. Includes a 7-way to 6-way straight adapter cord.by: Bill11/06/2023
The install on my Ford Maverick is clean and functional, so this is more of a customer service review... excellent customer service!
During the 4-day towing set-up install, the forecast was for freezing temps and my rig was not winterized. I called in mid panic and the motorhome was moved indoors.
A few months after using the tow set-up, a minor problem developed. I called and the CSR apologized and said, I can see how that might be frustrating, and a replacement cable (slightly longer) was sent free of charge.
by: Edward 05/16/2024
I also purchased brackets and receivers for the tow bar. Both were as advertised and are functioning very well. The staff were also very knowledgeable and helpful. Hard to find service of this kind in today’s world.
by: Phil 04/04/2024
The installation ins ructions and video were very helpful. The wiring kit worked perfectly.
by: Jason05/08/2023
Great kit. Easy to install. Connectors seem solid and wires are good.
by: James02/24/2024
The installation took some time and the instructions need to be clarified.
by: Dean 10/18/2023
Roadmaster
The Roadmaster 4 diode wiring kit has worked great for a full towing season.
Easy installation, great instructions, and added safety while towing.
The wiring kit easily integrated into the other braking and towing system components.
Thanks e-trailer!
by: Juan09/15/2021
2013 Subaru Forester
Works as expected. Connection feels solid enough. Have not had the opportunity to take it on a long trip yet.
One thing bit us in the butt, forcing us to cancel a trip at the last minute (when testing that our towed vehicle's turn signals, brake lights and supplemental brake system was working before driving off!): the left-turn signal prong in the male part of the connector (that plugs into the towed vehicle) was not opened enough, so no steady connection was being made because there was no contact between the prong and the walls of the female part. This had worked in a previous test. Picture included. Make sure to use a flathead screwdriver to open each prong up so full contact is made!
by: William 08/03/2023
This kit worked great. It was easy to install (etrailer offers installation videos if needed). I like this much better than a temporary set of lights on the towed vehicle. The cord and plug are also good quality.
by: Steve05/27/2021
I chose the order by phone option. The website is well organized, but, I had gone too long without hearing another person. I have received several orders from etrailer after purchasing an RV last summer. I knew we would be Purchasing a Toad.
I don’t have any experience with towing another vehicle, so I had plenty of help in finding the right equipment for me.
The delivery times were all easily tracked and arrived in good condition. As md on time.
I had the simple tools required to install the base plate and hitch. The videos available on their site are clear and easy to understand.
I have had a great overall experience with etrailer.
by: Daniel05/02/2024
Easy install. Good directions. Works as described.
by: Joe H08/31/2022
See my review on the Base Plate. The electric was a little wonky but my mechanic met with the manufacturer and was able to figure it out. That said, once it was resolved, it has worked flawlessly.
by: James04/10/2022
2019 GMC Acadia
Very straight forward install, easy to follow instructions. If you do this your self be prepared, the factory light wiring isn't very long or thick it was difficult to strip the wire back far enough to double it over to get a good connection. Upon completion of the wiring, I double checked all power at both plugs, it was all good, I installed the lights, brake and turnsignals worked great, I didn't have any running lights. About 3 min later they came on and stayed on. I don't believe this has any thing to do with the kit, this vehicle has all kinds of light sensors, darkness sensors, rain sensors.. etc. I believe it just too a min or 2 for the lights to actually come on.
by: Janes01/10/2024
Easy instructions and works great!!!
by: Stephen B07/14/2023
I have not been disappointed with anything I have ordered from you.
This wiring kit should do the trick for my flat towing project.
I am sorry that I couldn’t get all of the pieces from you, the transmission pump and base plate was ordered from another company.
This is my fourth camper you are helping me keep maintained and improved.
2000 Cougar 5th wheel bunkhouse,2016 Sprinter 5th wheel front living room , 2021 Nexus 31t class C and a 2016 sprinter tow behind.
by: Wayne05/17/2023
All running and signal lights work great. But no license plate light illumination.
Jenny N.
5/23/2023
You are correct in that the tow bar wiring harness part # RM-152-98146-7 will not illuminate the license plate light as the diodes are meant to keep the signals from backfeeding into your vehicle wiring. We have checked into this and having the license plate light is not mandatory when flat towing.
by: James04/20/2022
Toyota Tacoma
I had a Toyota Tacoma that has separate blinker lights. Took a mechanic that was knowledgeable in electrical wiring. Followed the instructions and it worked perfect. Used it several times since
James J.
4/21/2023
Great. Been on several trips. No problem
by: Bruce 10/04/2023
Easy to install. Would prefer a different method for securing the diodes. I used zip ties of good quality from Ty-Rap instead of the box store cheap imitations.
by: Tom F09/10/2023
2020 Jeep Wrangler
Very straightforward. I followed along to one of the videos on etrailer's site and it went very easy for me thank you etrailer!
by: Richard 02/23/2024
Works great.
by: Don 04/13/2023
Honda
Kit worked well. On 2012 Honda CRV I was able to run the wire to the rear under interior panels then install diodes inside each quarter panels eliminating any wiring or component connections exposed to the weather.
by: Boyd10/03/2022
2003 Jeep TJ
1 star is simply for the fact that the straight cord is too short. Bought to use with a road master tow bar. Since I needed a drop hitch to line the tow bat up with the toad I needed about a foot more cable. Tried to make do with the one supplied. I ended up having to spend an hour in the parking lot of an rv store wiring up a new one on my first trip. You would think for [local stores] you have to pay for this they could spring for a little extra wite.
Katrina B.
10/17/2022
That is unfortunate that there was not enough wire for your application. We do carry 16 gauge bonded 4 wire, part # 16-4B-1, by the foot. You can always contact our customer service department for them to assist you in getting this wire ordered.
by: Beemerjohn12/27/2023
Wiring was about 8 feet short to complete the task.
by: Edwin01/27/2023
It was the installation that was a issue, it works great now that I finally got it installed correctly. Had to go through 3 companies before it worked. It cost me 3 times as much, I went to a recommended installer from your site, and they hook it up but didn’t used the diodes that were provided. I took it back, and asked them to install the diodes.(the company “Fatal LLC”) charged me [XX] I kept getting feedback when the emergency lights were used, they say it’s normal for that to do that. I didn’t believe it, so I-took it to camping world, they rewired it and used a different diode don’t asked me why, but it-still didn’t work they said it would eventually work itself out, It didn’t, so I had still have the problem with the feedback when using the emergency flashers. I guess I’ll live with it. It works I guess….
by: Matt09/03/2022
I ordered base plates and the wire harness, the wire harness would not allow for brake, running, and turn signal lights, I had to omit one, the turn signals. The base plates where difficult, requires removing the front of the car. the video did not state the distance front to rear, I was a half inch to far forward and the fog light would not fit.
Jenny N.
9/20/2022
You mentioned that the harness would not allow for the brake, running and turn signal lights. For vehicles that have separate turn and brake lights, this kit will cause your brake lights to function as both brake and turn signal lights. This is perfectly fine. If you want to have both separate turn and brake signals, then you will need part # 118158 and part # RM-792 to do so.
by: Neal 04/08/2023
2023 Jeep Wrangler
Have not installed yet (DUO Brake system and wiring) from what I have seen I am impressed with all parts delivered.
tow bar Plate is more than substantial and the Tow bar is amazing.
25
252
Show More Reviews
See what our Experts say about this Roadmaster Flat Tow Wiring Harness
- Base Plate RM67VR VS RM77VR Comparison And Compatibility With RM-422 Tow BarBoth Item # RM77VR and Item # RM67VR are the same cross-bar style base plate but with different connection arms so installation will be the exact same for both. Since you're using the Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10K Item # RM-422 both base plates will work with this tow bar but the RM67VR will be slightly less time to connect because the # RM-422 comes with the same connection plates already installed.
view full answer... - All Parts Needed to Flat Tow 2009 Ford EscapeYes, per the owner's manual you can flat tow your 2009 Ford Escape; just be sure to follow the procedure outlined in the owner's manual. You'll need a number of things to flat tow your '09 Escape, which I'll go ahead and list out for you: - Base Plate Kit: Roadmaster Direct-Connect Base Plate Kit # 4414-3 - Tow Bar: etrailer SD Non-Binding Tow Bar # e74ZR - Wiring Kit: Roadmaster 4-Diode Universal Wiring Kit # RM-152-98146-7 - Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400 -...
view full answer... - Recommended Parts Needed to Flat Tow a 2017 Ram 3500 Diesel With an American Heritage RVThe equipment that you will need to flat tow your 2017 Ram 3500 includes a Base Plate Kit, Tow Bar, Safety Cables, Tow Bar Wiring, a Supplemental Braking System, and most likely a High-Low Adapter. For a Base Plate Kit I recommend using the Blue Ox # BX1989 which will bolt securely to your chassis. The Tow Bar that I recommend going with is the Blue Ox Avail Tow Bar # BX7420 which is rated for 10,000 lbs and comes with Safety Cables. I recommend installing the Roadmaster 4-Diode Universal...
view full answer... - Parts Needed to Flat Tow 2015 Jeep Wrangler Unlimited Rubicon With Smittybilt Bumper & 10 Inch RiseWe can get your 2015 Jeep Wrangler Unlimited Rubicon with a Smittybilt bumper set up for flat towing, including the correct high-low adapter to make up that large 10" height difference between the D-rings and your hitch. To make it easy, I'll create a list of the parts you'll need for your Jeep. - Base Plates: 3/4" Shackle Mounts: Adapter for Jeep D-Ring Bumper Mounts - 3/4" Thick # RM-035 OR - 1" Shackle Mounts: Adapter for Jeep D-Ring Bumper Mounts - 1" Thick # RM-035-1 - Tow Bar: Roadmaster...
view full answer... - Recommended D-Ring Adapter To Flat-Tow 2019 Jeep Wrangle With Aftermarket Off-Road BumperAs long as the Iron Cross bumper on your 2019 Jeep Wrangler is flat-tow rated and has D-Rings that are 3/4" thick or 1" thick you can use the bumper instead of base plates for flat towing. You will need to contact Iron Cross directly to confirm that you can flat tow with your bumper. If you bumper is flat-tow rated you can use the Roadmaster Adapter for Jeep D-Ring Bumper # RM-035 if the D-Rings are 3/4" thick or the Roadmaster Adapter for Jeep D-Ring Bumper # RM-035-1 if the D-Rings are...
view full answer... - 2007 Jeep Grand Cherokee Flat Tow PackageOh we got what you need! I recommend the Blue Ox Base Plate Kit - Removable Arms # BX1123 paired with the Blue Ox Avail Non-Binding Tow Bar - Motorhome Mount - 2" Hitch - 10,000 lbs # BX7420. Next you will need the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Wire to 6-Wire Straight Cord # RM-152-98146-7. This will sync your lights. Next the Demco Stay-IN-Play DUO Supplemental Braking System w/ Wireless Coachlink Monitor - Proportional # DM86VR. This will keep you safe...
view full answer... - Will Roadmaster Base Plate Kit Interfere With Adaptive Ride Control System On 2020 GMC Sierra DenaliI reached out to my contact at Roadmaster and he confirmed that the Roadmaster Direct-Connect Base Plate Kit # RM-523198-5 and Crossbar-Style Base Plate Kit # RM-523198-4 will NOT interfere with the adaptive ride control system on your 2020 Sierra 1500 Denali 4WD Crew Cab with the 3L diesel. With that being said, I recommend the Direct-Connect # RM-523198-5 as it offers the same rigidity as the Crossbar-style, but will be one less thing to deal with when installing your tow bar. I included...
view full answer...
- Flat Towing Setup For A 2021 Chevrolet Equinox For your 2021 Chevrolet Equinox, we have the Blue Ox Baseplate Kit # BX1730. This is confirmed to fit your 2021 Equinox, and will fit all Blue Ox tow bars like the Blue Ox Alpha 2 # BX7380. If you're interested in a complete setup, you'll also need: -Tow bar wiring # RM-152-98146-7 -Braking System # SM99243 -High Low Adapter # RM-048-4 You'll want to measure the rise and drop needed for your application, you can check out the FAQ I've attached to this answer page.
view full answer... - Can Roadmaster 4 Diode Tow Bar Lighting Kit Install on Vehicle with Separate Turn SignalsThe Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7 can work on your 1994 Jeep Wrangler that has separate turn signals from stop lights. It will wire to your Wrangler in a way that operates the stoplights just like a vehicle with combined taillights. So now your stop lights have two brightnesses (not really a word), lower illumination for stoplights and brighter for stoplights. With this kit installed it will allow the running lights to be on when the headlights...
view full answer... - Complete Flat Tow Setup And Tow Bar Compatibility For A 2006 Chevrolet TrailblazerTow bars like the etrailer XHD Non-Binding Tow Bar for Roadmaster Crossbar Base Plates # e64ZR are not vehicle specific, but rather base plate specific. So, to be able to use this tow bar with your 2006 Chevrolet Trailblazer you're going to need to use a XL, EZ, EZ2, and EZ4 Series base plate. I recommend checking out the: -Roadmaster Crossbar-Style Base Plate Kit # 3109-1. This base plate is confirmed to fit your 2006 Chevrolet Trailblazer, and will allow you to use the etrailer XHD...
view full answer... - Completing a Flat-Towing Setup for a 2018 Ford F-150Yes, the Blue Ox Base Plate Kit part # BO74FR comes with all the hardware you will need for installation in addition to the safety cables that secure the base plates to the frame. You can see everything that is included with this base plate kit in the attached photo. The Blue Ox Tail Light Wiring Kit part # BX8869 will work for you as long as you do not have LED tailights. You can add a 6-way round trailer connector to this kit with part # PK11609. If you do have LED tailights then I recommend...
view full answer...
- Parts Needed to Flat Tow 2018 Chevrolet Equinox Behind MotorhomeAccording to the owner's manual, 1.5L gas and 1.6L Diesel engine and 1.6L Diesel AWD models can be successfully flat towed. I'd recommend beginning with a Blue Ox base plate, part # BX1730 which is compatible with your tow bar if the # BX88297 adapter is used. You'll also want safety cables like # RM-643 if you don't already have them. To join the motorhome's taillight wiring to that of the Equinox, I'd recommend the Roadamaster Diode kit, part # RM-152-98146-7. For a supplemental braking...
view full answer... - Parts Needed to Flat Tow 2008 Honda CR-V Using Demco # 9511007 "Aluminator Tow BarTo flat tow your 2008 Honda CR-V AWD you will need a base plate kit for your CR-V. I recommend the Demco # DM9519207 tabless kit. This will include the parts needed to couple with your Demco # 9511007 "Aluminator" Tow Bar that you already have. Next you will need a tow bar wiring kit. I recommend the Roadmaster # RM-152-98146-7 Universal wiring kit which includes everything you need to connect your RV's tail, brake, and turn signal lights to your towed car. Diodes prevent feedback and...
view full answer... - Does the Demco Stan-IN-Play Supplemental Braking System Provide Power to the Towed Vehicle?The Demco # DM86VR Stay-IN-Play Supplemental braking system gets its power from the towed vehicles battery to run all of its systems. However, I think you might be asking about the tow bar wiring harness such as the Roadmaster # RM-152-98146-7 that provides the lighting systems (not brakes) for your towed vehicle. A tow bar wiring kit is sold separately from the supplemental braking system. If you need recommendations for other flat-tow parts just let me know.
view full answer... - Flat Tow Wiring for 2020 Hyundai PalisadeWhen using a car dolly, such as the Demco Kar Kaddy SS, # DM9713045, one generally uses the included lighting package for the indicator lights, plugging into the tow vehicles flat 4 plug or RV style 7-way. However, it is possible to use the same wiring harness for flat towing a vehicle instead, using vehicle indicator lights instead of the tow dolly's. Because they use the same tow vehicle/RV plug, it is one or the other. Since the 2020 Hyundai Palisade is not able to be flat towed, there...
view full answer... - Base Plates That Fit 2018 GMC Acadia DenaliWe do have a base plate that fits your 2018 GMC Acadia Denali, which is from Blue Ox; I did confirm with the manufacturer that the base plate does fit the Denali, and what you need is the following: - Blue Ox Base Plate Kit # BX1728 This does require the use of certain Blue Ox tow bars in order to properly connect to these base plates, and the one that will work which I recommend due to its long arms, non-binding design and included safety cables is the Blue Ox Alpha 2 Tow Bar # BX7380. You...
view full answer... - Setting Up The Blue Ox Patriot Braking System On A 2018 Chevrolet ColoradoAll you need to set up your Patriot Braking System # BLU37TR on your 2018 Chevrolet Colorado you'll just need to get the wiring kit # RM-152-98146-7 and a 12V Outlet Kit # RM-9332. I've included a video of the install to show you how it all hooks up. To complete your flat tow set up you'll need a baseplate like # e98966, this tow bar # DM9511008 and a battery disconnect # SE29VR. Video links for all of this I've included for you.
view full answer... - Recommended Flat Tow Setup For 2016 Ford F-150I would be happy to recommend everything you will need to flat tow your 2016 Ford F-150. Keep in mind that you will only be able to flat tow your vehicle if it is a 4x4 model. Starting with a custom fit base plate kit I recommend the Roadmaster Direct-Connect Base Plate Kit # RM-524431-5 due to its low profile design that when the arms are removed which makes the base plate kit blend in pretty well to the front of your vehicle as you can see in the included picture. For a compatible tow...
view full answer...
- Roadmaster Base Plate Kit for 2021 Ram 1500 For Use With Sterling Tow BarWe have the exact Roadmaster base plates you need for your 2021 Ram 1500 which are compatible with your Roadmaster Sterling Tow Bar # RM-576, which are the following: - Roadmaster Crossbar-Style Base Plate Kit # RM-522203-4 The crossbar-style is what is required for use with the Sterling tow bar, and I have added a link below to the installation instructions for you to check out of this kit. Also, for a tow bar wiring kit the best option is the Roadmaster 4-Diode Universal Wiring Kit...
view full answer... - Equipment Needed to Flat Tow 2021 Chevy Silverado 1500 If your 2021 Chevy Silverado 1500 is a 4WD model that has a two speed transfer case with a Neutral and 4WD Low setting, it can be flat towed. If its a 2WD or if it DOES NOT have a two speed transfer case, it cannot be flat towed and would need to be towed on a trailer with all 4 wheels off the ground. For base plates, I'd recommend the Roadmaster # RM-523199-5 which are compatible with vehicles that have tow hooks. For a tow bar, go with the Falcon All Terrain tow bar, part # RM-522. The...
view full answer... - Is Roadmaster Crossbar Base Plate Kit for 2021 Chevy Spark Compatible with Stowmaster Tow BarYes the Roadmaster base plate kit # RM-523202-4 is compatible with the Roadmaster Stowmaster # RM-501. We do offer both of them at the attached links. You'll also need safety cables # RM-643 Braking like # BLU37TR and lighting like # RM-152-98146-7
view full answer... - Recommended Parts for Flat Towing 2020 Wrangler UnlimitedTo flat tow the 2020 Jeep Wrangler Unlimited, in addition to the # RM-676 Nighhawk tow bar, I'd recommend the # RM-521453-5 direct connect base plates, the # RM-152-98146-7 wiring kit, a supplemental braking system like the Roadmaster Invisibrake, part # RM-8700 and the # RM-751490 stop lamp switch. The wiring kit includes an umbilical wire to connect the tow vehicle to the motorhome. Although your Nighthawk tow bar already includes this part, this is one part where you'll appreciate having...
view full answer... - Will The Demco Classic Base Plate Kit Fit A Demco Exaclibar Tow Bar On A 2005 Honda Pilot?Yes, the Demco Classic Base Plate Kit # DM9517143 that you mention is compatible with all Demco tow bars to include your Decmo Excalibar. Additionally, if you're interested in a complete flat towing setup for your 2005 Honda Pilot, you're also going to need: -A braking system, like the Brake Buddy Select 3 Portable Supplemental Braking System # HM39524, -A set of tow bar wiring, like the Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles # RM-152-98146-7, & -A set of safety...
view full answer... - Parts Needed to Flat Tow 2020 Chevy Silverado 1500 DieselI checked with Blue Ox and the # BLU54VR that you referenced does not have fit exclusions for the diesel engine versions of the 2020 Chevy Silverado 1500 so it would work great for your truck. The Avail Tow Bar part # BX7420 would be a great solution as well. The battery of your truck does need to be disconnected when flat towing it which is why the Roadmaster quick disconnect kit part # RM-766 is recommended as it makes this easier. Your current braking system would work great. For lighting...
view full answer...
Do you have a question about this Flat Tow Wiring Harnes?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Randy B
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Jameson C
Video by:
Zack K
Video by:
Kathleen M
Video by:
Shane H
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Rick G
Edited by:
Lindsey S
Installed by:
Jeff D
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Written by:
Shelly K
Updated by:
Hannah L
Updated by:
Isabelle B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
James
3/3/2023
no issues after 10K miles super happy with this product