Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors
Item # RM-154
Retail:$140.43
Our Price: $89.39
You Save: 36%
Confirmed to Fit
2011 Chevrolet Malibu
excluding LTZ
LTZ
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (774)
- Q & A (0)
- Photos
2011 Chevrolet Malibu - Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors
- Diode Kit
- Splices into Vehicle Wiring
- Tail Light Mount
- Universal
- Roadmaster
This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent damage from electrical feedback. Connects RV and towed car with 4-pole flat plugs. Includes installation hardware.
Features:
- Carries your RV's tail, brake, and turn signals to your towed car
- Prevents feedback that can damage your vehicle's electrical components with diodes
- Includes:
- 4 Hy-Power diodes
- (2) 4-Wire harnesses with 4-pole flat connectors
- Butt connectors, 1 ring terminal, zip ties, and plastic loom
Specs:
- Max amperage: 85 amps
- Max voltage: 24 volts
- Power cord: 6' long
- 4-Wire harness: 30' long
- Plastic loom: 3' long
Notes:
"Don't be intimidated by diodes: if you can strip and crimp wire, this installation will be no problem."
Combined Lighting System vs Separate Lighting System
A combined lighting system, or 2-wire system, uses the same light bulb to signal both braking and turning. (In other words, the car signals a turn by flashing the brake light.)
A separate lighting system, or 3-wire system, has the brake signal and the turn signal light up independently of each other. Typically, the turn signal is amber.
To keep the separate lighting system on your car functioning properly while you're flat towing, add a wiring converter (118158 - sold separately) and 2 additional diodes.
Do I Need a Brake Light Relay?
If the engine is off and your car's brake lights illuminate when you press the brake pedal, you need to install a brake light relay (RM-88400 - sold separately) with this kit. Without a relay, your car's brake signal will override the turn signal sent by the RV when you are slowing down to make a turn, creating a potentially dangerous situation. Other drivers will see that you're slowing down, but not that you're making a turn. With a brake light relay, you can signal both and travel safely.
Wiring Diagrams for Roadmaster Diode Kit
154 Road Master Universal Wiring Kit with 4 Hy-Power Diodes and 4 Wire Flat Trailer Connectors
Compare to Tow Ready TR118821
Installation Details
Customer Satisfaction Score:
92% were satisfied with this product
8% of customers were not satisfied
- Wrong item was ordered
- Product did not meet expectations
- etrailer mistake
Customer Reviews
Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 4-Way Flat Connectors - RM-154
Average Customer Rating: 4.8 out of 5 stars (773 Customer Reviews)
This wiring kit carries your RV's brake and turn signals to your towed car's tail lights. Diodes prevent damage from electrical feedback. Connects RV and towed car with 4-pole flat plugs. Includes installation hardware.by: Benjamin 05/09/2024
Simple to install kit that does exactly as listed. Very thorough instruction that were easy to follow.
by: Wes 02/10/2024
It does what it says on the tin. Easily lit up my XJ so I could tow it. Only regret is that by making the connections at the rear, you don’t get the front market lights on the toad. I should have connected the running lights diode in the harness under the dash so all the marker lights come on at night.
by: Larry02/10/2024
I’m always extremely satisfied with Roadmaster products. I had just bought a new truck and planned on towing it so I needed everything to get it ready to tow. This review also applies to to the other items I purchased.
by: Gregory H04/19/2024
First of all Justin B,was awesome so very helpful and knowledgeable went over everything with me and then double checked what was needed before I placed the order for my 2022 maverick to be flat towed, order only took 3days to get to Fl.Kudos to Justin B all the guys putting together the order
and etrailer awesome job,will definitely use them again for any of my needs.
by: Billy02/08/2024
I thought I order the 7 to 6 pin wiring harness for my vehicle as I have the 7/6 cord I used when I pulled my pickup. I also ordered the 6 pin mounting bracket with the 6 pin adapter that wires into the harness. I received the kit which is a flat 4 pin harness.
by: Gerald12/29/2023
2015 Subaru Forester
etrailer is a great company for towing products. They have fast delivery and they have nice installation videos. This order I added 2 more diodes to wire my 2015 Subaru Forester to have separate wiring for break, running, and turn signal lights.
by: Chuck B04/15/2024
Works perfectly and straightforward instructions made it easy to install.
by: Luis02/28/2024
This system worked perfectly from experience. They help from trailers e trailer agents was crucial for guiding me through the process.
by: David04/18/2024
2014 Chevrolet Equinox
It is exactly as advertised, not yet installed but looks pretty self explanatory
by: Howard 03/09/2024
THE EQUIPMENT IS FINE. THE INSTALLATION VIDEOS ARE SUPERB. MAKING PURCHASING THIS PRODUCT VERY WORTHWHILE.
by: Penny02/14/2024
I have order several things from etrailer. Their products are great. Due to nobody's fault but my own I ordered some wrong things. The return was so easy, no questions asked. I would recommend this company to anybody.
by: Dennis01/27/2024
2017 Jeep Grand Cherokee
I’ve used several of these and they always work great.
etrailer videos are a great help!
by: Kenneth 12/07/2022
Items arrived right on schedule and in good order. I ordered three items in the last few weeks. Their CHAT agents were extremely helpful in answering all my questions about compatibility with my vehicle.
by: Randy 05/14/2024
My parts arrived intact and in a timely manner. I am very pleased with my purchase.
by: Steve03/13/2022
Installation instructions were great, no issues or questions. I ran the wire thru the frame, and used split wire loom and tape to protect wiring when outside the tube frame.
by: Gerald11/12/2023
Great tow plate , easy to install
by: Robert06/02/2024
Good instructions and easy to install.
by: Keith 04/05/2024
Fits and works just as it should.
by: Richard07/25/2022
2019 Chevrolet Blazer
Product is very well built and is hidden within the bumper/grille. Installation wasn't too difficult, reinstallation of front bumper requires 2 people.
Pleased with end results.
by: Dean 05/17/2023
The install was more challenging than the tow bar itself but we got it done. Be patient with the tail light diodes they are tricky to fit but not impossible. I ended up using some 3m double sided adhesive sticky’s to hold the diodes in place while i pushed the tail light assembly back into position.
by: Doug 08/11/2023
Toyota Land Cruiser
I used this on a 1988 Toyota Land Cruiser, so I could flat tow it behind an Motorhome. Easy to install!
by: Billy 06/03/2023
2015 Jeep Wrangler
Lori was spot on in making sure I got the correct base plate assembly and light package for my 2015 Jeep Wrangler Sport. Deliver was within the projected timeframe and installation when as per detailed instructions . Good job Team ETrailer, that is why I keep coming back
by: Donald05/26/2023
We tow a 2022 Ford Escape behind our Winnebago motorhome. This wiring kit did the job for us. Everything working great!
by: Darrin03/03/2024
Easy install
by: Steven 08/21/2023
Jeep
Straightforward install on my Jeep Gladiator and no issues.
25
774
Show More Reviews
See what our Experts say about this Roadmaster Tow Bar Wiring
- Wiring Kit Needed for Dinghy Towing a 2009 Subaru Forester Behind a 1992 Monaco MotorhomeTo wire your 2009 Subaru Forester for dinghy towing behind a motorhome you will need to install a tow bar wiring diode kit like the Roadmaster 6-Diode Universal Wiring Kit, # 154-792-118158, or use removable towing lights like the Roadmaster # RM-2120. The Tow Ready Harness, # 118467, and the Curt Mfg. Harness, # C56040, are designed to allow you to tow a trailer with your Forester and will not work for flat towing the vehicle because the brake, turn and taillight signals need to come...
view full answer...
- Replacement Parts for the Roadmaster Sterling All Terrain Tow Bar Used on a 2008 Jeep LibertyThe only other part you will need other than the Roadmaster Quick Disconnect Base Bar, # 910021-00, is the Roadmaster EZ Hook Safety Cable Anchors, # RM-910653. The quick disconnect base bar will include 2 pins to secure the tow bar arms and the top adapter plate to attach the crossbar to the base plates on your 2008 Jeep Liberty. The safety cable anchors will bolt to the bottom of the top adapter plate that will be attached to your base plates. I have included a video that shows how...
view full answer... - Vehicle Tow Bar Wiring for Flat Towing a 2015 Ford F-150I do have a solution for you, but we currently do not carry the Blue Ox BX88287 EZ Light Wiring Harness that you mentioned. To install a wiring kit on your 2015 Ford F-150 we do have the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154 which is similar to the Blue Ox BX88287 except that this option will need to be spliced in. I have attached a video of this being installed on a 2016 F-150 that you can reference. If your motorhome does not have the 4-Way flat connector that is on...
view full answer... - Second Set-Up of Demco Air Force One Supplemental Braking System For 2021 Jeep Grand CherokeeFor your 2021 Jeep Grand Cherokee, the braking system you are needing is the Demco SBS Second Vehicle Kit for Air Force One Supplemental Braking System, # SM99209. This includes everything needed to tow your new 2021 Jeep Grand Cherokee without having to install an entirely new Demco SBS Air Force One supplemental braking system. I recommend the Roadmaster Direct-Connect Base Plate Kit, # RM-521440-5 for use with your Roadmaster BlackHawk 2 Tow Bar, # RM-422. Please note the linked installation...
view full answer... - Recommended Tow Bar Wiring Kit for 2022 Jeep CherokeeI recommend the Roadmaster Universal Hy-Power Diode Wiring Kit, # RM-154 to along with your Roadmaster Nighthawk Tow Bar, # RM-676.
view full answer... - Tow Bar Wiring For 2019 Chrysler Pacifica For Tow Dolly Lights at Same TimeTo use tow bar wiring on your tow dolly and 2019 Chrysler Pacifica at the same time, your motorhome will need a 7-way and 4-way active at the same time with the Hopkins Endurance Multi-Tow Twist-Mount 7-Way RV and 4-Way Flat Trailer Connector - Vehicle End # HM40920. You will then need tow bar wiring with a 4-way harness for the Pacifica, the Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154.
view full answer... - What Is Needed To Flat Tow 2012 Fiat 500With Roadmaster brand base plates installed on your 2012 Fiat 500 but missing the arms, you simply need to select Roadmaster Replacement Arms for Base Plate Kits, # RM-ARMS and scroll to the pdf of "Installation Details" to complete the form. Because Roadmaster (currently) only offers the # 522013-1A for your vehicle, this makes it easy to identify what your part number. But please verify against the tag on what is installed. If you are not only missing the arms but the cross bar too,...
view full answer... - Parts Needed to Flat Tow a 2016 Jeep Wrangler SaharaIn order to flat tow your 2016 Jeep Wrangler Sahara you will need at least 5 main parts. Those parts being a base plate kit, tow bar, safety cables, tow bar wiring and supplemental braking system (which you already have). I have listed those parts out below along with a brief description of their purpose. Base Plate Kit: This is a custom fit part that provides the attachment points needed on your Jeep for the tow bar. - Roadmaster Direct-Connect Base Plate Kit # RM-521448-5 (works with...
view full answer... - Parts Needed for Flat Towing a 2005 Chrysler Town and Country Behind a Class A Motor HomeYou can flat tow your 2005 Chrysler Town and Country with automatic transmission behind your Class A motor home. There are 5 components needed to flat tow a vehicle and those are a tow bar, base plate kit, safety cables, tow bar wiring and a supplemental braking system. The Roadmaster MX Base Plate Kit, # 274-3, will work on your vehicle. You will also need a tow bar like the Roadmaster Falcon 2 Tow Bar, # RM-520. We have two options for wiring/lights. You can use a diode wiring kit...
view full answer... - Parts Needed to Flat Tow a 2012 Ford Focus Behind a Motor HomeThere are 5 components needed to flat tow your 2012 Ford Focus and those are a tow bar, base plate kit, safety cables, tow bar wiring and a supplemental braking system. The base plate for your vehicle is the Roadmaster EZ5 Base Plate Kit, # RM-524430-5. You will also need safety cables, # RM-645, as they are required by law when flat towing a vehicle. You should not have a problem, but check your tow bar and make sure it is compatible with EZ5 style base plates. If it is not compatible,...
view full answer... - Tow Bar, Base Plate Kit, and Accessories Needed to Flat Tow a 2011 Ford RangerTo start off with, you will need a base plate kit for your 2011 Ford Ranger. The Roadmaster XL Base Plate Kit with Removable Arms, item # 477-1, is the correct kit for your vehicle. Next, you will need a tow bar. If you are towing with a motor home that has a 2 inch receiver, the RoadMaster Falcon 2 Tow Bar, item # RM-520, would be a great choice. You will not need the Roadmaster Tow Bar Quick Disconnect Kit, item # RM-201, that you selected with this tow bar, because the Falcon 2 comes...
view full answer... - Tow Bar Wiring Recommendations to Flat Tow a 2011 GMC Sierra Behind an RVYes, we do have tow bar wiring harnesses that will activate the lights on your 2011 GMC Sierra and plug into the connector on your RV. If the RV has a 4-Way flat connector you can use diode kit # RM-154. If the RV has a 7-Way trailer connector you can use diode kit # RM-15267. We also have Hopkins harness # HM56101 which plugs in line with the vehicle wiring as shown in the installation video I linked for you. If you go with this harness you will also need extension # HM47115. If the RV...
view full answer... - Best Flat Tow Wiring Harness for a 2010 Honda FitIn regards to the Tow Ready Tail Light Isolating Diode System part # TR118821 and the Roadmaster Universal Hy-Power Diode Wiring Kit part # RM-154, the Tow Ready kit will be easier to install as more of the wiring connections are already made for you but the Roadmaster kit takes up less space because the diodes are physically smaller. That is really the only difference between them. In regards to the Roadmaster Tail Light Wiring Kit for Towed Vehicles part # RM-152-LED, there will be...
view full answer... - Complete Flat Towing Setup And Fuse Bypass Kit For A 2018 Buick Envision?Fuses F29 and F32 are directly related to the Body Control Module (BCM). Typically in modern automobiles, the BCM controls the power windows, power mirrors, air conditioning, immobilizer system, central locking, etc. The BCM also communicates with other on-board computers using the car's vehicle bus, and its main purpose is to control load drivers, which are actuating relays that in turn perform actions in the vehicle such as locking the doors, flashing the turn signals (in older cars),...
view full answer... - Flat Towing Recommendations For A 2021 Chevy Colorado Z71The Demco Tabless Base Plate Kit - Removable Arms Item # DM9519319 will fit your 2021 Chevy Colorado as long as it doesn't have adaptive cruise control. If you do have adaptive cruise control I recommend the Roadmaster Crossbar-Style Base Plate Kit - Removable Arms Item # RM57VR. The Demco Commander II Non-Binding Tow Bar # DM9511012 you linked to will work with the # DM9519319. You will also need tow bar wiring and a braking system. I have the following recommendations for your below: Tow...
view full answer... - Recommended Flat Towing Equipment For A 2014 GMC AcadiaFor your 2014 GMC Acadia I recommend the Blue Ox Base Plate Kit - Removable Arms Item # BX1708. The hidden reinforcements, along with the removable bracket arms, provide a clean, unobtrusive look when your car is not being towed. The other equipment you will need for flat towing your vehicle is a tow bar, tow bar wiring, a braking system, and some safety cables. I have the following recommendations for you below: Tow Bar: Demco Commander II Non-Binding Tow Bar for Blue Ox Base Plates...
view full answer... - Parts Needed to Flat Tow a 2013 Jeep Wrangler Unlimited Behind a Motor HomeFrom what I have found the 2013 Jeep Wrangler Unlimited does NOT need to have fuses pulled to flat tow it. This means you will not need a fuse bypass. Consult the owners manual to confirm this and for other specific information on flat towing your Jeep. There are other items needed to flat tow your Jeep: base plates, tow bar, safety cables, lighting, and supplemental braking. For base plates I recommend the Roadmaster XL base plates # 1439-1. These base plates will fit without an aftermarket...
view full answer... - Troubleshooting LED Lighting on Tow Bar and Wiring Kit for Towing a 2018 Jeep JL Wrangler UnlimitedSince your Nighthawk All Terrain # RM-677 runs off of the running lights and you are having issues with the driver's side stop/turn function with the Hy-Power Diode Wiring Kit # RM-154 installed on your 2018 Jeep JL Wrangler Unlimited I recommend checking your connectors and grounds to make sure they are secure and that there aren't any places where there might be debris or corrosion. As far as the Hy-Power Diode Wiring Kit goes you may want to double check that you installed it using...
view full answer...
- Will the Blue Ox Tow Bar Wiring Kit Fit a 2022 Jeep Grand CherokeeIf your 2022 Jeep Grand Cherokee is a WK which is the fourth generation body style and not the WL which is the fifth generation body style then the Blue Ox Tow Bar Wiring Kit part # BLU86XR is a confirmed fit. If you have the latter we don't have any plug-in-play options yet so you'll have to go with a hardwire like the Roadmaster Universal Hy-Power Diode Wiring Kit part # RM-154 or magnetic lights like the Custer Wireless LED Tow Bar Light part # LIW-LDTL-7B.
view full answer... - Recommended Flat Towing Equipment For A 1994 Geo TrackerThe Roadmaster Crossbar-Style Base Plate Kit - Fixed Arms Item # 118-1 is a confirmed fitting base plate for your 1994 Geo Tracker and to attach it to your Reese tow bar you'll need the Roadmaster Tow Bar Adapter # RM-025. To flat tow you'll also need a braking system, tow bar wiring, and safety cables. I have the following recommendations for you below: Braking System: Brake Buddy Select 3 Portable Supplemental Braking System - Proportional Item # HM39524. This system provides intense,...
view full answer... - Troubleshooting Brake Lights Overriding Turn Signals On 2021 Jeep Wrangler Being Flat-TowedThe Roadmaster Stop Light Switch Kit # RM-751490 is what is required for your 2021 Jeep Wrangler Unlimited, and not the # RM-88400 you mentioned. This is due to the stop light switch on your Jeep timing out of after so long. This kit is designed to stop the brake lights from overriding the turn signals, so since you are having these issues still that leads me to believe there is a wiring issue with either the switch or the tow bar wiring # RM-154. I recommend following the included instruction...
view full answer... - Best Parts Needed to Flat Tow 2019 Jeep Wrangler Behind MotorhomeFor your Jeep Wrangler JL, I recommend starting with the Roadmaster EZ5 Base Plate Kit # RM-521453-5. This kit has removable arms to give you a very clean look when not flat towing your Jeep, and also gives you a clean connection to your tow bar when towing behind your motorhome. For your tow bar, I recommend the Roadmaster Nighthawk All Terrain, Non-Binding Tow Bar w/ LED Lights # RM-676. This tow bar comes with the integrated safety cables and the wiring to link your motorhome's 7-way...
view full answer... - Is Brake Lite Relay Needed for 2012 Honda Fit Using 4-Diode Wiring and Stay-IN-Play DUO BrakingSince you are using the 4-diode Roadmaster Universal Hy-Power Diode Wiring Kit # RM-154 with the SBS Stay-IN-Play DUO Supplemental Braking System # SM99251 on your 2012 Honda Fit, that means yes, you will also need to install the Roadmaster Brake-Lite Relay Kit for Towed Vehicles # RM-88400. I've added a link to a video review and install of this kit for you to check out as well.
view full answer... - Will the Base Plates for a 1991 Daihatsu Rocky Also Fit a Daihatsu Feroza?So I did some research on your Daihatsu Feroza and it looks like the "Rocky" was the name given to it in Japan and the US, while in Europe/Australia the "Rocky" was named Feroza, but they are the same vehicle. So with that being said, you can use the Roadmaster Crossbar-Style Base Plate Kit # 2301-1 will work fine. Since you already have the Roadmaster Falcon 2 # RM-520 I can also assume you already have a wiring kit # RM-154 and a braking kit.
view full answer...
Do you have a question about this Tow Bar Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Rick A
Test Fit:
Shane T
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Shane H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Sarah L
Expert Research:
Robert G
Expert Research:
Patrick B
Expert Research:
Michael H
Expert Research:
Jeff D
Expert Research:
Reno H
Expert Research:
Jameson C
Expert Research:
John H
Expert Research:
Adam R
Expert Research:
Rachael H
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Andrew L
Video Edited:
Kathleen M
Video Edited:
Mike H
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Video Edited:
Jonathan Y
Video Edited:
John S
Video by:
Andrew K
Video by:
Alan C
Video by:
Zach D
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Schuyler H
Video by:
Ethan H
Video by:
Rick G
Updated by:
Lindsey S
Updated by:
Wilson B
Updated by:
Hannah L
Updated by:
Amanda K
Installed by:
Cole B
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Kenneth
12/8/2023
Diodes were not the ones I needed even though the etrailer site said they were. I had to purchase the correct ones from the auto electric shop where I had the wiring done.