Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
Item # SM99251
Retail:$1,668.98
Our Price: $1,175.00
You Save: $493.98
Confirmed to Fit
2016 Ford Edge
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (574)
- Q & A (0)
- Photos
2016 Ford Edge - Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Brake Systems
- Hydraulic Brakes
- Proportional System
- Demco
- Fixed System
- Power Assist Brake Compatible
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components designed to stay out of sight.
Features:
- Guarantees smooth, reliable braking
- Reads RV's brake light signal to ensure system only activates when you actually hit the brakes
- Senses the rate of your RV's deceleration and triggers your towed car's brakes to slow down at the same rate
- Lets you adjust braking sensitivity to suit your vehicle and your preference
- Plug-and-play
- System automatically turns on when your towed car is connected to the RV
- Components install permanently and stay tucked out of sight
- Monitors your towed car's braking with LED indicator on car's dash
- Lights up when the brakes are applied
- Avoids damage from over-braking by reactivating car's vacuum-assisted braking
- Includes breakaway system and all necessary components
- Made in the USA
Specs:
- Application: motorhomes with hydraulic brakes
- Compatible with hybrids and other cars with continuous-power-assist brakes
- Operating unit dimensions: 8" long x 5" wide x 2-1/4" tall
- 5-Year warranty
"This is the top system I recommend if you have hydraulic brakes. Quality, reliable, tried-and-true. It just always works."
Do I Need a Braking System for Flat Towing?
A braking system is a must when towing a vehicle behind your motorhome. Without it, the weight of the towed car can create a safety hazard, strain your RV's brakes, and affect the warranty of both your car and motorhome. Most states legally require a supplemental braking system, so if you don't use one and you end up in an accident (which is more likely since your RV takes longer to come to a full stop), your insurance and liability headache just doubled. You also won't have any breakaway system; if there's an accidental disconnect, there's nothing to bring your car to a stop.
Pros of a Permanent System
The Stay-IN-Play Duo is a permanent braking system, which means that it's a one-and-done. Once it's installed, there's no more setup that you have to do. When you plug in the power cord at the front of your vehicle, the system automatically turns on. Flip the on switch for the G-Force controller and just like that, you're ready to flat tow.
While the components are installed permanently in your RV and toad, they remain concealed and inconspicuous. None of them will interfere with normal driving, and most of the time they are invisible. And you don't have to find a place to store them between trips.
How Does the Demco Stay-IN-Play Duo Work?
The Stay-IN-Play Duo is unique in that it uses both an inertia sensor and your motorhome's brake light signal to activate. Having this double-check ensures that the system will only activate when it's truly needed.
First, the Duo monitors your motorhome's brake light signal so that it knows when you're intentionally hitting the brakes. This ensures there's no false braking.
Second, the inertia sensor in the Duo senses the change in momentum of your toad (towed vehicle) as your setup slows down. It precisely measures this change so it can activate your toad's brakes to match the rate of the RV's deceleration; this is what makes it proportional. When you apply the brakes in your motorhome, the braking system will engage the brakes of the toad at the same time with the same amount of force. This keeps the RV and the toad in sync with each other, so whether it's a gradual slow down to a red light or a hard stop in an emergency, the toad and the RV will brake together.
It starts with the G-Force controller. The G-Force controller contains the inertia sensor that senses the change in your RV's momentum. You'll install it in the cab of your toad, underneath the dashboard. This keeps it out of the way but easy to reach so you can flip the toggle and adjust the knob.
Note: The G-Force controller must be pointed in the direction of travel - with the toggle switch facing the driver's seat - for the internal sensor to function properly.
The controller lets you adjust the sensitivity of the inertia sensor to determine how drastic the change in momentum must be for the system to trigger. Set the sensitivity low and the Duo will only engage when you forcibly step on your motorhome's brake pedal. Set it high and a mere tap on the brakes will get a reaction. It's totally up to you how sensitive you want it to be; a heavier vehicle will probably need more sensitivity, while a lighter one doesn't need to brake so hard. The knob on the face of the controller lets you easily program your setting.
When the G-Force controller detects a change in inertia, it checks that there's a brake light signal from the RV to confirm that it is indeed braking. It then sends a signal to the main operating unit to activate; the main unit delivers pressurized air through an air line to the actuating cylinder that attaches to your toad's brake pedal. The cylinder will pull the pedal down, applying your brakes almost instantaneously.
The actuating cylinder attaches permanently to the arm of your toad's brake pedal. Though it is permanent, it should not interfere with your everyday driving. In most vehicles, it is tucked up where you can't even see it.
Vacuum Pressure Creates Smooth Braking
When you're driving, your vehicle uses vacuum pressure to create the force needed to bring the car to a stop. On most vehicles, this vacuum-assist function does not work when the engine is off. As a result, a lot of supplemental braking systems have to use an excessive amount of pressure while braking the toad.
The Duo, on the other hand, reactivates the vacuum-assist function by tying into your car's vacuum line. Your car will brake evenly and naturally as it's being towed, so there's less risk of damage.
Built-In Safety Features
Included with the Duo is an LED indicator light for safety and peace of mind. This LED, mounted in the toad (on the dash or on the back of the rearview mirror) and visible in your RV's backup camera, will light up whenever your toad is actively braking. It's a simple way to keep tabs on whether the system is working properly or if something is going wrong.
Most supplemental braking systems have a method of letting you know you when they activate, but not all of them are checking if the toad is actually braking. There could be an error that causes the system to activate without actually applying the toad's brakes. Or your brake pedal might actually be continuously depressed when it shouldn't be. But unless you have a system that's monitoring your vehicle, you won't know it until the damage is already done.
This braking monitor connects directly to your toad's brake light switch so it only lights up when the pedal is depressed and a signal is sent to the brake lights.
If there's a strong glare on your toad's windshield, the LED light strip might be hard to see. The wireless Coachlink system (SM99945 - sold separately) is a great solution to this problem; the monitor mounts right on your motorhome's dashboard so it's directly in view. This is a great add-on for convenience and peace of mind.
The Duo also comes with a breakaway switch, an absolute must for safe flat towing. If there's ever an emergency situation where your toad becomes detached from the motorhome, the breakaway switch will immediately activate the brakes and bring the vehicle to a stop.
This switch mounts to the front of your toad and wires into the Duo's operating unit. It includes a pin that connects to your RV's hitch receiver with a breakaway cable. If the toad and RV become disconnected, the cable will pull the pin out of the switch and trigger the braking system. A reserve air supply in the operating unit will then apply the brakes in the car.
What You Need to Flat Tow
Flat towing can be a much more convenient way to take your car RVing with you than using a trailer or a tow dolly. It'll save you storage space both at home and at the campsite, and it takes less time and hassle to hook up.
To flat tow your vehicle, there are 5 basic components you're going to need: a tow bar, a base plate kit, a safety cable set, tow bar wiring, and a flat tow braking system.
| For the RV | Between the RV and Towed Car | For the Towed Car |
|---|---|---|
| Hitch | Tow bar | Base plate |
| Wiring plug | Safety cables | Braking system |
| Wiring adapter cord | Wiring kit/diodes |
The custom-fit base plate installs on the frame of your toad so you can connect the car to your RV with a tow bar. Hook up safety cables between the vehicles to ensure that the toad does not separate from the motorhome if the tow bar becomes detached. Tow bar wiring syncs your vehicle's signal lights with your motorhome's tail lights, as required by law in most states. Finally, the flat tow braking system - also required in most states - activates the brakes in the toad when you hit the brakes in the RV, making for smoother, safer braking, and preventing wear on your motorhome.
9599006 Demco SBS - (Formerly SMI) Stay and Play DUO Supplemental Braking System for Motorhomes with Hydraulic Brakes - Proportional
Replaces Demco SBS SM99251
DM9599006
Installation Details
Customer Satisfaction Score:
94% were satisfied with this product
6% of customers were not satisfied
- Wrong item was ordered
- Too difficult to install
- Product did not meet expectations
Customer Reviews
Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional - SM99251
Average Customer Rating: 4.8 out of 5 stars (574 Customer Reviews)
Plug in and go: this permanent system gets you smooth, reliable braking with a one-and-done installation. Low-profile components designed to stay out of sight.by: Dale04/13/2023
2017 Chevrolet Spark
I mounted this in a 2014 Chevy Spark. Finding a spot for the main control unit was interesting, but I found a video for a 2017 Spark that I could use. I did have to drill an extra hole in the mounting flange and car. I haven't taken it on a trip as of this time, but a tow around the block indicated it was working. One note, watch about placing the LED indicator behind the tinted part of the toad window. It makes it harder to see from the camper camera.
by: Gary11/09/2023
2020 Ram ProMaster 3500
Installing on 2020 Jeep Trailhawk :
Pic #0557 : Roadmaster Base Plate Kit , Demco Supplemental Braking System , Diode Wiring Kit , Demco Battery Charge Wire Kit
Pic # 0548 ,0551 , 0559 Had to adjust the bracket plate to line up with the upper bolt holes
Pic #6028 finished install , mounted the operating unit to the top fuse box cover using automotive Velcro . Air cylinder , controller and LED light installed . Aside from the base plate bracket not lining up with the upper bolt holes I would give it 4 stars . My son in law is a master at solving mechanical issues .
by: David 04/24/2023
2014 Smart fortwo
Product rec'd on time. Very good quality and works fine. Installation instructions were great.
Diana G.
4/27/2024
The Demco braking system has been working flawlessly on our little Smart car. Very satisfied.
by: Dean10/18/2023
The Demco stay-n-play braking system has worked flawlessly for a full season of towing! The one time installation went smoothly and all components fit and functioned perfectly.
Very easy to use, connect to tow vehicle, flip a switch, and it's ready to tow. Disconnect from tow vehicle, flip a switch, it's ready for normal driving.
Would highly recommend this setup over other braking systems.
by: TheEngineer03/10/2024
Installed on a 2013 Nissan Frontier. Works great but I had a hard time finding someone to install it. I tried my regular mechanic and an two others. They did not not want the liability? The Demco site lead me to an RV service shop that did a great job. They hide the wire from the brake indicator mounted on the rear view mirror by routing it through the trim so it just stays plugged in (one less thing to do when hooking up). They also added a battery charging line from the motor home to keep the Frontier's battery from getting too low from exercising the brake on long trips.
by: Herbert M07/09/2017
2016FordEdge
Thanks to installation videos provided by etrailer, I felt confident that I could do the install myself. I had never pulled off moldings and panels in a car before, but with your videos as guidance , it was a breeze. This system was going into a 2016 Ford Edge 3.5L AWD and your (and SMI's) instructions call for installation of 2 check valves. After calling SMI to clarify the install points, it got even easier, as only one valve is required, and is ridiculously simple to install it. No cutting of original car hoses required (see photo). After everything was installed, the whole setup just simply worked, no troubleshooting required. That was fun and it is totally doable, even for the average guy like myself.
Herbert M.
7/13/2018
The rear-view camera display in my RV is not good enough to show the operation of the brake notification LED which is applied to the rear-view mirror in the towed car. I installed a small light in the RV dash and ran wiring all the way back to the toad, with a disconnect plug at the hitch, of course. Now it is easy to see when the car brakes come on. Else, the system works great.
by: Bob P.12/08/2018
2005 Jeep Liberty
I'm very pleased with this Stay-in-Play /DUO Braking System which I installed on my 2005 Jeep Liberty. I debated wheather I dared install it myself, but with the video instructions I decided that I could. I watched the video a couple of times, then followed it step by step during the installation, and it went pretty smoothly. One issue I had is that they changed the instalation of the LED indecator light, since the making of the video, so the parts did not come as described on the video. I do prefer the new method, as described in the installation manual, but it does require a toggle switch to turn it off. I installed one just below the Control Unit inside the car (see photo). I was also very impressed since, right after ordering the system, I found it for less on another web site. I emailed eTrailer about my disappointing discovery, and they credited me back the difference. GREAT COMPANY!
Robert P.
12/9/2019
One year later, the system is still working great. Still very pleased.
by: David09/15/2020
Haven't actually had the chance to tow behind yet so this is just for the install. It took me quite a long time to install but, that's not the products fault. Everything you need to do the job is included.
I only give it 4 stars because the system uses the towed vehicles battery to activate the vacuum/compressor pump, so it would be possible to run the battery down as there is no charge circuit from the towing vehicle. I did choose to add one though. Other than that I'm sure it'll work fine. It was installed on a 1983 Vanagon.
David
10/21/2021
Im not in the car when it works, but the indicator light comes on so I assume they work. Honestly, my motorhome is so big I cant tell if there working or not, mostly I stalled to be legal and safe. I like it.
by: Cynthia 03/29/2024
Best braking system om the market and e trailer once again is the best value for your dollar. been using the system for over a year without any issues what so ever
by: Charles 04/15/2024
Jeep
Works very well it saved my Jeep from a bad accident, but it will run down your battery, I use a solar panel on the hood to keep the battery topped off.
by: Stephen12/23/2022
Works great! I would buy it again. Tow a 2021 Jeep Wrangler, 5400 lb., And glad to have the braking help, especially in the mountains. Low maintenance, no complicated wiring between motorhome and Jeep.
Stephen
1/3/2024
Still working great. Simple to use and effective. I have recommended it to many fellow RVers.
by: Rick08/07/2022
2014 Honda CR-V
After watching the excellent installation video I had very little trouble installing this product. I like the fact that it is a stay-in-play system that literally requires only the flip of a switch to activate. The major components are all installed out of the way, yet are still easily accessible. As for the braking system itself, I find it operationally excellent and believe this product choice was a great one.
by: Glenn 01/27/2024
2020 Jeep Wrangler
Absolutely great product and worth the time and effort to install. Once installed and "adjusted correctly" this unit is flawless. I installed it with everything else from ETrailer in 3 days, taking my time and I have a very clean installation. Once installed the tech support guided my "sensitivity" level for the perfect application. Also their TECH support was on it both times I called. The other was in ref to a brake light switch sold by etrailer but was not needed for this and they provided the intel off the top of his head. Absolutely recommend this product and both DUO and Etrailer as companies.
by: Jerome 04/19/2024
It’s my far the best and easiest way to go plug it in and go easy install about three hours for me to do it and had no idea what I was doing working great
by: Scott 03/12/2024
Braking system is easy to use and works great. System was installed by etrailer and they did excellent job.
by: Chris B04/24/2015
2003 Subaru Outback Wagon
I chose to go with this unit because I didn't like the idea of the other types that mash the brake pedal without any vacuum assist & the fact that you have to remove, then reinstall them each time you want to use the car.
This ended up TOUGH install. Not because of the unit, but rather the lack of ANY room under the hood on my 2003 Subaru Outback Wagon to mount the operating unit. The only place I could find that would be out of the way was under the driver's seat of all places! Luckily there was JUST enough hose with the unit to reach all the way to the brake booster. I had to cut the carpeting so the seat would clear the operating unit during movement without any chance of contact. There was no hole in the firewall large enough to accommodate the hose so I had to drill a hole for that although I was able to route the wiring through a small rubber grommet. Routing the hose to the firewall was a real challenge! I ended up running it through the heater duct under the driver's floor mat to the left side kick panel, then up over the pedals keeping clear of any moving parts. WHEW!!
The brake pedal actuator went on without much fuss, although with my large feet I have noticed I'll catch the actuator with my toe on occasion. I may mark the location it's in now & merely raise it up a tab in between trips.
The wiring was pretty much straight forward, there was plenty of included wire & I had JUST enough room tho mount the G-Force Controller on the left kick panel covering without interfering with my feet.
The breakaway switch I fastened to the body in front & below the radiator.
I read where everyone was saying you need to have a battery cut-off device to keep the braking system from draining the battery over time, but I had power from the RV keeping the battery fresh so I didn't worry about that & saved myself the $180 for the cost of an automatic battery disconnect.
After installation, I sat in the car while we towed it around the neighborhood to see how it worked & made the necessary adjustments to the G-Force Controller. Now THAT was weird! What with the car steering itself & braking too.
We just got back from a 4,000+ mile trip & everything worked fine. On occasion I forgot to flip the switch to turn the system off, but it didn't seem to make much of a difference.
All in all a great system!
by: Richard 03/14/2024
The stay in play system has worked perfect for the last 8000 miles, I am very satisfied .
by: Karl12/11/2018
It wasn't easy to get everything installed in a way that looked neat and professional but in the end the ease with which you can hook up the car and start towing makes it worth it. I bought a replacement factory vacuum pump line so that I didn't have to worry about ruining the original one and as a result the installation looks that much better. Literally all I have to do is flip a switch once the car is connected and I'm ready to go. Given a second opportunity to do the installation I would mount the LED light strip vertically on the backside of the rear view mirror to make it a bit more visible but other than that, I'm happy with how it turned out and the system works great.
by: Steph09/06/2023
I am very deceived and feel I have bee fooled by the false affirmation, this is not proportional. I DO NOT RECOMEND THIS PRODUCT.
This system is nothing but proportional. All proportional wording or video is misleading should be removed. It's actually an on-off system. When braking light is on and the tilt sensor actually (on-off) is on the pump is on at full pressure pressing the brake until it bottoms out, period. The pump inlet creates a vacuum for the brake booster and the pump outlet is for the cylinder pressing the brake. All triggered by a simple switch. Nothing is regulated or proportionally controlled. Totally false information is provided here. Unfortunately the initial concept is good, but lacking the extra electronic pressure regulator and electronic control.
I had to set the angle switch so the system ONLY TURNS ON in the event of an emergency, otherwise it will brake fully and destroy your towed vehicle brake.
I am sure this review will not appear and will be deleted by the moderator. Too many good fake reviews...
Brooke M.
9/19/2023
I reached out to the manufacturer about this and they said what makes it proportional is the system works on two signals, the first signal needed is the brake signal that comes electrically from the coach, the second signal is when the towed vehicle feels forward inertia. The pump does not come on full, it slowly ramps up pressure, the more inertia felt the longer the system runs, the longer the system runs the more pressure that the system creates. The more pressure the system creates the harder the brake pedal is depressed. I also asked about the sensitivity issues you seem to be having and Demco said they have heard of that before when the sensor isn't installed level, as outlined on page nine of the instructions.
by: Jamie03/01/2021
I personally installed this on my 2020 Jeep Wrangler and have towed it using this braking system over 4K miles and have had zero issues. Would definitely recommend! The installation instructions were well written and included an easy to read wiring diagram making is easy to install and the very knowledgeable etrailer support was a bonus too!
by: Michael R06/06/2018
2018 Jeep Wrangler
After doing much research and reading many reviews and watching a lot of your instructional videos I chose the Stay-in-Play Duo. It came complete with instructions and extra parts for any application. I like the fact that after everything is installed it is just a matter of flipping a switch and checking it out and drive off. I mounted it in a 2018 Jeep wrangler, not very much room for the operating unit, but I I went off of one of your videos on a 2017 Jeep Wrangler Unlimited and mounted it underneath above the cross frame below and behind the radiator but still protected from the elements. Not a lot of room under the dash either, but everything is in and looks great and ready for the 1st trip.
by: David02/10/2018
2012 Dodge Charger
I installed this in a 2012 mini Cooper S. With the turbo charger there is no room in the engine compartment for the system unit, so I mounted it under the passenger seat. I had to remove the seat, cut out the carpet, mount the unit, and then buy longer seat attachment bolts. I used half inch thick spacers between the seat track in the floorboard. Made a long run for the vacuum hose to get up to the engine compartment through the firewall. By removing the cowling on the driver side, it exposes a huge Gromit where the main wiring harness passes through the firewall. It actually had two nipples ready to be cut off to run the vacuum hose and the wires through — so that part was pretty easy.
I haven’t towed it behind the motorhome yet, but it passed all the start up tests the first time!
by: Patricia 02/16/2024
2013 Jeep Wrangler Unlimited
Just towed for the first time using this system. Worked great on our Jeep. Now we just flip the toggle switch to turn on and off. Install was a bit of a challenge, but the Demco help line was very helpful.
by: David 02/29/2024
As always, E-Trailer is a class act. Excellent products and excellent service before and after the sale. I wish all companies would emulate E-Trailer.
by: Sam08/19/2023
Erica G at etrailer was very helpful with managing my order and getting it to me w/ regular updates. The installation takes a lot longer than all of the etrailer 30 min videos but after it’s installed it’s easy to activate.
25
575
Show More Reviews
See what our Experts say about this Demco Tow Bar Braking Systems
- Will the Stay-IN-Play Work On a 2004 Pontiac Vibe With Brake Booster Behind FirewallThe Demco SBS Stay-IN-Play DUO Supplemental Braking System part # SM99251 is a great option for a 2004 Pontiac Vibe. It is not something we have installed on this exact vehicle but there are many instances which I have run into personally where the brake booster is directly behind the firewall where the brake pedal is. The standard practice we use when this is an issue is to drill a small pilot hole through the firewall then run a small wire though this to see how much room is there before...
view full answer... - Recommended Flat Towing Equipment For A 2021 Ford F-150To tow your 2021 Ford F-150 you'll need a tow bar, base plate, braking system, tow bar wiring kit, and safety cables. I have the following recommendations for you below: Tow Bar: Roadmaster BlackHawk 2 All Terrain, Non-Binding Tow Bar # RM-422. This tow bar features a non-binding design and large hookup radius to make hooking and unhooking your vehicle on any terrain a breeze. Base Plate: Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM38VR. These direct-connect base plates...
view full answer... - Are There Modifications to Front of 2021 Jeep Grand Cherokee Limited w/ Blue Ox Base Plates BX1128The only modifications needed for the front of your 2021 Jeep Grand Cherokee Limited will be to the lower portion of the fascia at the bottom grill, where cut outs will be need to made for the base plate tabs and electrical bracket to sit when you are installing the Blue Ox Base Plate Kit # BX1128. If you go to about the 34:45 mark of the linked installation video you can see the cut outs that will need to be made. This will be the first part of your flat tow set up, and you'll also need...
view full answer... - Recommended 2016 Chevrolet Sonic LTZ Auto Flat Tow EquipmentFor a permanent install braking system for your 2016 Chevy Sonic the SMI DUO Stay and Play part # SM99251 is the best option. But if you wanted something that installs easier but requires removal and re-installation every time it's used the Blue Ox Patriot part # BRK2019 is the best option for that. You'll need the outlet kit part # RM-9332 to go along with this to power it. For a base plate kit the part # 523173-4 is a confirmed fit and would work well. The most popular compatible tow...
view full answer... - Parts Needed to Flat Tow 1990 Mazda MiataIn order to flat tow your 1990 Mazda Miata you are going to need base plates, a tow bar, safety cables, wiring to activate brake and turn signal lights, a supplemental braking system and likely a high-low adapter. The base plates that fit your Miata are the RoadMaster XL # 711-4 and the compatible RoadMaster Tracker Tow Bar # RM-020 which you referenced. For safety chains you can use the RoadMaster 68" Single Hook, Coiled Safety Cables # RM-643. There are a couple of options for you...
view full answer... - Can a 2011 Ford Ranger be Flat Towed and Parts Needed to do soI took a look at the online version of the owner's manual for your 2011 Ford Ranger and it looks like on page 149 that you can flat tow it if you have a manual transmission. If you have a 4WD with the automatic transmission then you can purchase an accessory from your local Ford dealer. If you have a 2WD automatic then you need to tow it with all 4 wheels off of the ground. Be sure to verify this and any specific instructions on flat towing in your copy of the owner's manual. For a 4WD...
view full answer... - Why Does Flat Towing 2018 Jeep Cherokee Require Special Harness for Power Steering 68321424ABFrom our experience the part 68321424AB is required on a 2018 Jeep Cherokee when flat towing. I recommend checking with a dealership for confirmation. The harness is designed to address a "wobble" or steering issue that occurs sometimes when the vehicle is flat towing. The newer Cherokee 4x4's have electric power steering. Many people reported a severe shaking/wobble while towing over rough roads. Jeep issued a Service Bulletin which calls for a special wiring harness which keeps the PS...
view full answer... - Parts Needed To Flat-Tow a 2017 Chevy EquinoxIn order to flat-tow a 2017 Chevrolet Equinox you will need a number of different parts which I will attach for you below. Roadmaster Direct-Connect Base Plate Kit part # RM-523184-5 Roadmaster Falcon 2 Tow Bar part # RM-520 Roadmaster 64" Single Hook, Straight Safety Cables part # RM-645 Hopkins Custom Tail Light Wiring Kit for Towed Vehicles part # HM56108 Demco SBS Stay-IN-Play DUO Supplemental Braking System part # SM99251 The bases plates are installed on the tow vehicle and...
view full answer... - Needed Items for Flat Towing 2003 Mini CooperTo flat tow your 2003 Mini Cooper with your Roadmaster Falcon All Terrain, # RM-522, I suggest the Roadmaster EZ Base Plate Kit with removable arms, # 521876-1. The Roadmaster's EZ Twistlock series brackets are virtually invisible, easy to mount and simple to remove. These brackets install on your Mini Cooper's frame to provide attachment points for your tow bar. You will also need safety cables, I recommend straight cables # RM-645. You will also need a lighting solution, one of the...
view full answer... - Recommended Roadmaster Base Plate Kit for a 2023 Jeep Gladiator Mojave I looked online and couldn't find a MOJAVI model so I am assuming that's a typo and you meant Mojave. With that in mind we have a couple of options for Roadmaster base plate kits for a 2023 Gladiator Mojave. The correct one for your set up will depend on whether your Roadmaster tow bar is a crossbar style or a direct connect style. If you're unsure go ahead and email me back with a couple of pictures, a name, or part number and I'll identify it for you. Crossbar Style Tow Bar - Roadmaster...
view full answer... - Recommended Blue Ox Base Plate Kit for a 2023 Ford Bronco For a Blue Ox compatible base plate kit that works with your 2023 Ford Bronco, you will need the Blue Ox Base Plate Kit item # BLU23XR. This kit is custom fit and comes with everything needed to install it on your Bronco. These attach in the same place where your recovery hooks are located. The base plate replaces the recovery points which are not rated to be used for flat towing. I have attached a picture below so you can see what they look like installed. The tow bar needs to be within...
view full answer...
- Recommended Flat Towing Set Up for a 2018 Jeep Grand CherokeeThe Demco Tabless Base Plate Kit item # DM9519291 you were looking at comes with everything you need to connect Demco, etrailer, and Blue Ox tow bars to. It is custom fit for a 2018 Jeep Grand Cherokee. It fits all models including the Trackhawk and SRT-8. I am not sure what you mean by combo kits but there is no one option fits all for flat towing. You'll need to purchase multiple parts. I have listed the rest of the parts you will need to flat tow your 2018 Jeep Grand Cherokee below...
view full answer... - 4-Pin Wiring Kit For Flat Towing 2013 Mini CooperTo flat tow your 2013 Mini Cooper, you will need a diode wiring kit, and the 4-pin wiring kit you will need is from Roadmaster: - Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil Wiring Kit # RM-154 This diode wiring kit is going to protect your Mini's electrical system by preventing any feedback and will power its lights for when you are towing it. Along with the wiring kit you will need a few other parts for your flat tow set-up: - Blue Ox Base Plate Kit # BX1307 - etrailer SD Non-Binding...
view full answer... - Using Roadmaster Base Plates with a Blue Ox Tow Bar to Flat Tow a 2002 Jeep Grand CherokeeThe adapter # RM-032 will fit Blue Ox Aventa, Aventa II, Kar Bar, Aladdin, Alexxa, Acclaim (and all Blue Ox A-Frame tow bars with 1 or 3 pronged attachment). If you do not already have some safety cables you can add some using # RM-643. For lighting if you will not be towing very often I recommend a magnetic kit like # RM-2120. But for more frequent flat towing a more permanent solution is diode kit # 154-792-118158. The diode kit also requires a relay # RM-88400 to keep the Jeep's brake...
view full answer... - 2021 Chevrolet Silverado 1500 Demco Base Plate for Flat TowingI would be happy to help you find a base plate for your 2021 Chevy Silverado 4WD so you can flat tow it. I recommend the Demco Tabless Base Plate Kit - Removable Arms item # DM9519342. This custom-fit base plate kit lets you hook up your tow bar to your Chevrolet Silverado 1500. The tabless design provides a clean, unobtrusive look for your towed car even when not hooked up. To complete your flat tow package you will need the following parts. Demco Excali-Bar III Non-Binding Tow Bar...
view full answer... - Do Base Plates for 2021 Jeep Wrangler Unlimited with Factory Steel Bumper Alter Skid Plate?Each of the base plates that fit your 2020 Jeep Wrangler Unlimited (with factory steel bumper) do require the altering or even replacement of the skid plate (also sometimes called a rock guard). The base plate kit I recommend because it will allow the skid plate to be trimmed but not outright replaced is the Roadmaster Direct-Connect Base Plate Kit # RM-521453-5. I went ahead and linked a video to a 2020 Wrangler model to give you perspective. In addition to the base plate kit, you will...
view full answer... - What Parts Do You Recommend for Flat-Towing a 2021 Jeep Wrangler?If you have a 2021 Jeep Wrangler (with the factory steel bumper), you will first need a base plate installed. I recommend the Roadmaster Direct-Connect Base Plate Kit - Removable Arms # RM-521453-5. The Direct-Connect kit has a streamlined design that creates supremely clean look. Once the base plate is installed, you will need the Replacement Base Pins with Chains and Clips for Roadmaster Tow Bars # RM-910029 in order to mount the next important component: the tow bar. For the tow bar,...
view full answer... - Parts Needed To Flat-Tow a 2012 Fiat 500It sounds like you are wanting to flat-tow a 2012 Fiat 500 behind a motorhome and if that's the case you'll need a few different components such as base plate kit, tow bar, safety cables, wiring harness, and braking system. I have attached each of these components for you below. Roadmaster Crossbar-Style Base Plate Kit part # 522013-1A Roadmaster Falcon 2 Tow Bar part # RM-520 Roadmaster 64" Single Hook, Straight Safety Cables part # RM-645 Roadmaster Diode 7-Wire to 4-Wire Flexo-Coil...
view full answer... - Base Plates That Fit 2018 GMC Acadia DenaliWe do have a base plate that fits your 2018 GMC Acadia Denali, which is from Blue Ox; I did confirm with the manufacturer that the base plate does fit the Denali, and what you need is the following: - Blue Ox Base Plate Kit # BX1728 This does require the use of certain Blue Ox tow bars in order to properly connect to these base plates, and the one that will work which I recommend due to its long arms, non-binding design and included safety cables is the Blue Ox Alpha 2 Tow Bar # BX7380. You...
view full answer... - Flat Towing a 2007 Suzuki XL7You will need to refer to you vehicle specific owners manual as to whether your 2007 Suzuki XL7 can be flat towed; trim levels, transmission options and other vehicle specific options all need to be considered to determine if a vehicle can be flat towed safely and without damage occurring. If you determine that your 2007 Suzuki XL7 can be flat towed you will need the following items: A base plate kit. I suggest the Demco Classic Base Plate Kit, # DM9518137. This is a confirmed fit for...
view full answer... - Flat Towing a 2014 Jeep Wrangler With Bumper Tabs Behind Class C MotorhomeThe first thing is to ensure that the bumper you have on your 2014 Jeep Wrangler is rated for towing. Not all are so contact the bumper manufacturer and ensure that you are safe to flat tow by the bumper tabs. The tab mounts available show they fit a 7/8" or 1" diameter hole so double check your measurement as well before ordering. These Bar Adapeters # RM-035-1 will replace the ends on the Roadmaster Falcon All Terrain Tow Bar # RM-522. These bars are designed for simple connection and...
view full answer... - Installing A Demco SBS Stay In Play Duo Supplemental Braking System On A 2020 Equinox LT AWDThe Demco SBS Stay-IN-Play DUO Supplemental Braking System - Proportional # SM99251 is a confirmed fit for your 2020 Chevy Equinox and I've attached an installation video of the braking system in a 2020 Chevy Equinox to help with your installation. I spoke with Demco about this same issue in a 2020 Buick Envision and they provided a picture of what they did to attach the actuator to the brake pedal (see attached picture). The technician recommended bending the bracket where it attaches...
view full answer...
- Parts Needed to Flat Tow 2016 Jeep Wrangler Black Bear Behind an RV with Stowmaster Tow BarIt looks like the 2016 Jeep Wrangler Black Bear has the same front bumper as regular Wrangler models so you can use Roadmaster base plates # RM-521448-4. These base plates are compatible with the Stowmaster 5000 tow bar that you have. If you don't already have safety cables I recommend # RM-643. The coiled design helps keep the cables off of the ground. For lighting I recommend diode kit # RM-15267. I have linked a video showing an example installation of this kit on a 2016 Wrangler for...
view full answer... - Parts Needed to Flat Tow a 2006 Mini Cooper SIf you haven't already check your owner's manual and make sure there aren't any restrictions preventing your 2006 Mini Cooper S from being able to be flat towed. The Roadmaster Base Plate Kit # 521876-1 will fit your Mini as long as you have a convertible. If you have a hardtop then you'll need the Blue Ox Kit # BX1303. I suggest the Optronics Magnetic Tow Lights # TL21RK. These bypass the Mini's wiring completely and will provide a 4-way connector at the front. The lights then mount...
view full answer...
Do you have a question about this Tow Bar Braking System?
Info for this part was:
Test Fit:
Joe V
Test Fit:
Nicholas E
Test Fit:
Randy B
Test Fit:
Jared G
Test Fit:
Matthew S
Test Fit:
Andrew S
Test Fit:
Brent H
Test Fit:
Robert C
Test Fit:
Conner L
Test Fit:
David F
Test Fit:
Ryan G
Test Fit:
Clayton O
Test Fit:
Bradley B
Test Fit:
John A
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Video Edited:
Zack K
Video Edited:
Joshua S
Video Edited:
Jacob T
Video Edited:
Kathleen M
Video Edited:
Dustin K
Video Edited:
Sue W
Video Edited:
Chris R
Video Edited:
Zach D
Video Edited:
Jonathan Y
Video Edited:
John S
Video by:
Andrew K
Video by:
Andrew L
Video by:
Alan C
Video by:
Shane H
Video by:
Michael B
Video by:
Jacob H
Video by:
Aidan B
Video by:
Thomas T
Video by:
Ethan H
Video by:
Rick G
Edited by:
Lindsey S
Installed by:
Jeff D
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Kristina F
Updated by:
Mike S
Updated by:
Noah M
Updated by:
Manda E
Updated by:
Amanda K
Written by:
Lisa S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Dale
4/17/2024
We are very pleased with this system. We hauled the Spark on a 5,000+ mile trip out west and the brake system did its job. I did tweak the setting a couple of times to get it as I liked it. As noted in my initial post, I still have trouble seeing the LED indicator behind the tint if the windshield, especially in bright sunlight.