Flat Towing a 2014 Jeep Wrangler With Bumper Tabs Behind Class C Motorhome
Question:
I need some assistance is ing a budget friendly tow bar setup. I have a 2014 Jeep Wrangler unlimited that I want to tow behind a Class C RV. It has a modified bumber with D rings that are 1” thick steel with a 3/4” diameter hole. Can you put together a package of everything I need with a tow bar, wiring, brake assist, etc?
asked by: Ryan R
Expert Reply:
The first thing is to ensure that the bumper you have on your 2014 Jeep Wrangler is rated for towing. Not all are so contact the bumper manufacturer and ensure that you are safe to flat tow by the bumper tabs.
The tab mounts available show they fit a 7/8" or 1" diameter hole so double check your measurement as well before ordering. These Bar Adapeters # RM-035-1 will replace the ends on the Roadmaster Falcon All Terrain Tow Bar # RM-522. These bars are designed for simple connection and removal by having a non-binding design. You will need the Combo Towing Kit # RM-9243-1. This will include the wiring to connect your Jeep taillights. It also includes the cables, locks and storage bags to keep everything protected.
Your Jeep will require the battery is disconnected during tow. I recommend using a Battery Disconnect # RM-766. This will allow you to just flip a switch rather than removing a battery terminal. It will also allow you to use a Battery Charge Line # RM-156-25. You will require this as your braking system will require power from battery. The charge line will ensure that your battery doesn't become drained while towing.
The Demco SBS Stay-IN-Play DUO # SM99251 is a great braking system. It is designed to mount under your hood and ties into your vacuum brakes to give full braking capability. Best of all when you are ready to tow you just flip the switch and your ready.
Lastly you may or may not require a adapter to move the bars higher lower on your motorhome. The tow bars are designed to only have a 3" difference from motorhome to vehicle to ensure proper use. The Adapter # RM-048-4 will give you a 4" lift or drop if you require this. If you require something different, please let me know. I also recommend using the Quiet Hitch # RM-061 to remove the slop that the bars and receiver have. This will also help remove the excess noise that you may get when towing as well.
Products Referenced in This Question
Roadmaster High-Low Adapter for Tow Bars - 2" Hitches - 4" Rise/Drop - 10K GTW, 400 lbs TW
- Accessories and Parts
- Tow Bar
- Hitch Adapters
- High-Low Adapter
- Fits 2 Inch Hitch
- 4 Inch Rise/Drop
- Roadmaster
more information >
Roadmaster Quiet Hitch for 2" Trailer Hitches
- Hitch Anti-Rattle
- Standard Anti-Rattle
- Universal
- Fits 2 Inch Hitch
- Sleeve Style
- Accessory Anti-Rattle
- Towing Anti-Rattle
- Roadmaster
more information >
Roadmaster Battery Charge Line Kit for Towed Vehicles
- Accessories and Parts
- Tow Bar Wiring
- Battery Charge Line Kit
- Roadmaster
more information >
Roadmaster Falcon All-Terrain Tow Bar - Non-Binding - RV Mount - 2" Hitch - 6,000 lbs
- Tow Bar
- Hitch Mount Style
- Telescoping
- Steel
- 6000 lbs
- Fits Roadmaster Base Plates - Crossbar
- Fits Roadmaster Base Plates - Direct Connect
- Stores on RV
- Non-Binding
- Roadmaster
more information >
Roadmaster Battery Disconnect with Switch for Towed Vehicle w/ Flat Tow Brake System - Gas
- Accessories and Parts
- Tow Bar Wiring
- Auto Battery Disconnect
- Roadmaster
more information >
Roadmaster Accessory Kit for Falcon Tow Bars - Tail Light Wiring - Safety Cables - Lock Set
- Accessories and Parts
- Tow Bar
- Accessories Kit
- Falcon 2
- Falcon All Terrain
- Roadmaster
more information >
Demco Stay-IN-Play Duo Flat Tow Brake System for RVs w/ Hydraulic Brakes - Proportional
- Tow Bar Braking Systems
- Brake Systems
- Proportional System
- One Time Set-Up
- Fixed System
- Power Assist Brake Compatible
- Hydraulic Brakes
- Demco
more information >
Product Page this Question was Asked From
Adapter for Jeep D-Ring Bumper Mounts to Roadmaster Motor Home Mount Tow Bars - 1" Thick
- Base Plates
- Aftermarket Bumper Adapters
- Hitch Pin Attachment
- Roadmaster
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Should There Be Any Gap Between The Roadmaster D-Ring Adapter And The D-Ring
- Q&A: Can a Jeep Wrangler be Flat Towed by the Front Bumper
- Q&A: Which Bumpers Can I Flat Tow a Jeep Wrangler JLU With Using D-Ring Adapters
- Q&A: Tow Bar To Attach To Warn Elite Bumper On A 2014 Jeep Wrangler
- Q&A: Should You Have Side-To-Side Play With Roadmaster D-Ring Mount Adapters
- Q&A: Can Roadmaster D-Ring Adapter Part # RM-035-1 be Used with Demco Tow Bar
- Article: Roadmaster Vehicle Specific Base Plates
- Article: Flat Towing Package for 1998-2006 Jeep Wrangler
- Article: Trailer Wiring Diagrams
- Q&A: Parts Needed To Flat Tow 2020 Jeep Wrangler With Smittybilt XRC Bumper Gen 2
- Article: Flat Towing Package for 2018 Jeep Wrangler JL and JL Unlimited
- Article: Best Vehicles to Flat Tow Behind an RV
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Must-Have Flat Towing Components