Tow-Rax L-Track - Tapered - Anodized Black - Aluminum - 6" Long

Video Transcript for Review of Tow-Rax Tie Down Anchors - Trailer Tie-Down Anchors,Track Systems and Anchors - TWSP6TAB

Today we're gonna take a look at the Tow Rack's L Track with a taper design in anodize black. This is going to be 6" long by 2 1/2" wide. Now, the L track is gonna provide you with a quick and easy attachment point for your enclosed trailer, flat bed, truck, pretty much anywhere that you need to have that nice anchor point for any cargo tie downs.Basically the way that we're gonna use it, we'll have our L shaped track there with those circle cut outs to allow any of our anchors to go in and hold securely. This does not come with any of the anchors, or any hardware, so you will have to pick those up separately. We have a lot of options for the anchors, including this one here. This is just gonna be a single stud.

We'll pull up on that little plunger there. We can slide this into place. You just want to make sure that you get it locked into one of those narrower portions of the track, like here. And then once it's clipped into place, it's gonna hold securely in there, and keep all our cargo tightly secured down. Again, this is available separately.

This particular one is gonna be part number TWSPSSTD. We have that along with some other tie downs available as well.You can also get an end cap for this to complete the look, prevent anybody from getting tripped up by that right angle edge. The right angle is gonna be nice since we can link up other lengths of our tow rack's track. We do have other lengths available besides this 6". But an end cap is just gonna complete that edge there, taper it down, so we don't have to worry about that being a snag point.The thing that I really like about this is that it's gonna be made of an anodized aluminum, so we don't have to worry about any rusting, or corrosion.

It's gonna be really lightweight, but it's still very durable. Again like I said, there is no hardware that comes with this, so you will have to pick up your own flat top counter sunk bolts, or screws to get this attached to your vehicle. That flat top design will allow you to have full access to your track, so you don't have to lose any anchor points by securing this down.Again, this is going to be 6" long and 2 1/2" wide. It'll be 7/16" deep, so just under a 1/2" there. The distance between our attachment points, or our mounting holes is gonna be 4" center to center.

Overall, this is gonna have a nice tapered design. Again, so we don't have to worry about it being a tripping hazard, or any of our wheels getting stuck on it if we're bringing in a vehicle, if you have an ATV, or UTV, or anything like that.That's gonna do it for our look at the Tow Rack's L Track with a tapered design in anodized black, measuring 6" long and 2 1/2" wide.