To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.
Features:
Rhino-Rack HD Crossbars - Silver - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today on our 2012 Honda Civic, we're going to be test fitting the Rhino Rack Vortex Aero Roof Rack System, consisting of part numbers RRVA126B-2. Those will be their cross bars. Part number RRRLKVA. Those are going to be the legs. Then part number DK319. Those are going to be the clamps that attach it to your vehicle.
We have the first the front one installed already on our vehicle. You can see it has a nice aerodynamic shape. It's going to cut down wind noise and drag. Both bars have a combined weight capacity of 165 pounds, although you want to double check with your vehicle to make sure that your roof can withstand that weight. Let's go and show you how the rear one goes on. We already have it partially assembled on our table.
We'll show you how the other end gets put together. We'll first take our leg. You can see it has this bracket here at the top. That's going to slide into this channel here. Go ahead and do that.
We'll slide that into place, and then I'm going to go ahead and put the end cap on while I'm on it, and take our tool here to lock it into place. Next, I'm going to go ahead and get my measuring tape, measure out the distance where this leg has to be set. Now these do come with strips, where you would measure it out and cut it to length, and that would be a fixed point, so you always know that's where it has to be. For today, we're just going to go ahead and measure it out. Okay. Then we'll go ahead and tighten the screw down here with the included Allen tool.
Do the same for the other side. Double check that measurement there. Okay. We're good. Next we'll go ahead and take our pad here that's going to go against the vehicle. Put that in place. Just kind of push it in. Then we'll take our clamp. Flip this around here so you can see a little bit better. Install that by first unscrewing this. Put our clamp into place. Then we'll re-insert the screw. Just loosely for now. All right. Now we're going to set this on our vehicle. Go ahead and open up the two rear doors. We'll set our cross bar into place. Now we'll go ahead and get our cross bar spread measurement. We're going to measure from center to center. You'll want to double check with your instructions to get the right measurement. Looks good about right there. We'll repeat this for the driver's side. All right. Those are relatively where we need them to be. I'm going to go ahead and make a quick adjustment here so it's kind of sitting evenly on the roof. Then we'll just loosely tighten the clamps just so they're touching the vehicle here. Just get them snug. Do the same on the other side. One we have that done, we'll actually start tightening them down. Now once we actually start tightening them down, we're going to try to do this evenly. About five or six turns each side. Some accessories you can put on these roof racks include bike racks, cargo baskets, cargo boxes, kayak carriers, and ski carriers. That's good there. Once this is tightened down, you can see how this blue handle here is curved. Once it actually tightens down, you push it in, it's going to straighten out like that, from the curve where it's at now, and that'll tell us it's ready. Final step. We're going to put our covers on, which are lockable, which will secure this to the roof of your vehicle, excuse me. There you have it for the Rhino Rack Vortex Aero Roof Rack System on our 2012 Honda Civic.
Average Customer Rating: 4.4 out of 5 stars (78 Customer Reviews)
These heavy-duty, aluminum crossbars work with Rhino-Rack legs to create a sturdy roof rack. The square bars include built-in C-channels for mounting Rhino-Rack heavy-duty, contractor-grade accessories.Recently switched vehicles from an 05 nissan frontier nismo to a 14 Honda Civic SI sedan. I was very excited that all I needed was this pad and clamp kit to transfer my rhino rack from the truck to the car. The parts came quickly and service was great. I will continue my patronage with etrailer as long as I need rack related products. Attached is a pic of my rack in use on my new SI.
Here are some pics of the Rhino-Rack Heavy-Duty Roof Rack Crossbars - Silver - 50" Long - Qty 2 installed on my 2011 Honda CR-V.
That I recently purchased.
The rack fit well and was easy to install. Seems to be made well. The problem is the amount of road noise. I never even put the basket on. It was so loud, it roared. I repositioned it several times but the noise was way too much and I finally just removed it. I spent a lot of money for the rack and the basket and now they are in storage. I wish it would have worked out better because I thought it looked really good.
Exactly what I expected and shipped very quickly by e-trailer. Thank you!
I've had this Rhino Rack 2500 series for one year. I've outfitted the rack with one "J hook" style kayak holder and one "cradle" kayak holder. I am able to securely travel with two kayaks on the roof of my 2014 Honda Civic sedan without issue. During the one year I've had this rack I've traveled over 1,000 miles with two 12 foot+ kayaks on my roof. I can set cruise control at 70mph and not worry about the rack failing. I rate it four (4) stars because the cradles will sometimes move during a long drive and have to be readjusted. This is something that is more cosmetic in the since it looks slightly off, however it does not affect the racks security.
I haven't extensively used this rack yet, but so far, it is excellent.
Avoid my mistake and buy this rack first... Last summer, I purchased a much cheaper off-brand roof rack that was supposed to fit my car. I figured the off-brand rack couldn't be that different from the more common brands, such as Rhino Rack. Long story short, I was wildly wrong. It was nearly impossible to install, and once installed, I didn't trust it with my wind surfboard on it. This rack, however, was easy to assemble and install and is rock solid. I have zero fear of my board or the rack leaving the party before we get there.
Ordered a Rhino Rack for my 2014 GMC Sierra 2500HD Denali. Rack arrived in very good shape and all items were there. Installing at this time and see no problems ahead.
Thanks to Etrailer, I am ready to do some serious summer exploring with my 2013 Mazda 3! Rhino Racks, Malone top box, and Kuat bike rack!
Rhino Vortex roof rack (w/attachments). Once instructions have been read through then installation was pretty straightforward. Quite pleased with this rack! Fit, design, wind noise reduction all better than expected. etrailer came through as a first rate provider-nothing but good words for them.
Instructions were clear, measurements were accurate, and the assemblies are solid. All the posted photos showed exactly what to expect.
Good quality and locks are included. The plastic lock covers are flimsy but they will keep an honest person honest.
I got the roof rack mounted anyways. Better pics to come when it's all finished!
Great product everything fit perfectly. With the heavy duty bars almost all the hardware for anything you put on the rack is too short
Excellent customer service, all current manufacturers for this type of equipment is not available for purchase because Yakima, Thule, even Rhino Rack did mention from customer service representatives from these 3 companies states you are better off purchasing from a distributor such as E-trailer. This company definitely had the transfer equipment from a Yakima support base to a Rhino Rack crossbar system. I needed the additional load weight and Jaime from E-Trailer was extremely patient and helpful…seriously awesome customer service…also my package came 2 days earlier in this truck driver shortage too. Job well done.
This kit is easy to slap on and sturdy enough to balance my skis and snowboards. I recently used the Rhino Rack on a three hour drive to a ski resort and had no issues.
This rack worked out great... I installed in on a 2017 Ford F-150. We drove 6 hrs through wind and rain with a SUP and Tandem Kayak on top. It really took a beating in a storm the whole way. One bracket was a little loose and shifted because of the wind on the Kayak, but it held together. Super happy with Rhino rack!
This loader is amazing...I easily load a 4' x 14' Sunfish sailboat at 120lbs easily without damaging my 2005 Nissan Armada...super sturdy...exactly as advertised. Note:. I order the extra heavy bar and did not need it! Now I take my sailboat with me while I pull my travel trailer. You won't be disappointed. Etrailer ROCKS IN CUSTOMER SERVICE...THEY HUNTED DOWN ALL INFO NEEDED TO MAKE THE PURCHASE...give DENA W a big raise!!!!!!
The Rhino rack has been working well. It is a relief to get my ladder out of my car and to be able to use the back seat.
This is my second Rhino-Rack. They go on very easily and hold the bikes/kayaks and even an extension ladder very well....thanks for a great product
This rack works perfectly on my Nissan Versa for carrying my two Perception Sound 9'6" kayaks. The Rhino-Racks look good to me. The kayaks can rest directly on the rubber pads on the rails, unlike the Yakama racks I had in the past that had bare pipe rails. Also, I expect I can buy parts to adapt this product to a different car without having to buy new towers. I am sorry there are not hooks or loops to attach bungees when carrying lumber. They are noisy in the wind, but less so when carrying the kayaks.
Excellent rack and very secure. Fits perfectly on my Honda Civic. I've been using it for my paddle board and it has been working out very well. High quality and easy install.
Two items I received surprised me when I unpacked the box were the rails because they were not black like I saw in the picture, and the rubber insert that I am having a hard time sliding in the rail. Should this rubber insert have come already installed in the rail or is there a top on how to put in with ease?
This is an excellent product. It was the only product that would fit my truck. I was able to mount it by myself, it took me longer than I thought it would, but it helps if you watch first a video on line about how to put it together. The support staff is excellent if you miss any parts. I highly recommend it for the 2015 Nissan Rogue.
Andrei
The product was well packaged and well buffered. The package came a day earlier than the scheduled arrival period. I used the instructions on the website and it took me only 15 Minutes to assemble it and another 20 to set it in my car. Im in love with how it looks on my Civic 2015 and would Highly recommend it to others. The company had a wonderful follow up, from the time I bought the product to its arrival and even after its arrival. Thumbs up to this wonderful team. Here are some pictures of the product on my Civic.
Well engineered rack that fits my Ram 2500 crew cab well. A bit of wind noise at highway speeds. I have the heavy duty cross pieces with a square cross section.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.