Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2
Item # Y66KB
Our Price: $688.80
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
- All Info
- Reviews (115)
- Q & A (0)
- Videos (5)
- Photos
Yakima Roof Rack - Y66KB
- Aero Bars
- Crossbars
- 70 Inch Bar Space
- Black
- Yakima
- 2 Bars
- Overhang
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 70" Long - Black - Qty 2:- Quiet, low-profile crossbars let you build an aftermarket roof rack for your vehicle
- Pair with Yakima towers and a fit kit to create a complete roof rack
- Asymmetrical JetFlow shape creates an extremely aerodynamic roof rack system
- Built-in WindRidges help control air flow over bars to dramatically reduce wind noise and vibration
- Aero-style bars reduce drag to help maintain fuel efficiency
- Full-length design maximizes space for carriers and accessories
- Versatile crossbars accommodate accessories that mount in the T-slots or clamp around the bars
- Works with most universal-mount bike, water, snow, and cargo carriers
- Rubber SmartFill strips in T-slots allow for easy installation of channel-mounted accessories
- Simply push down on the SmartFill strips to slide in accessories - no trimming required
- Bottom channels allow for easy installation on Yakima towers
- Fit BaseLine, RidgeLine, SkyLine, and TimberLine towers
- Etched measurements on bottoms of bars help center rack on your roof
- Lightweight aluminum bars are durable and rustproof
- Internal JetTruss extrusions provide exceptional bar strength
- Black powder coat finish is corrosion resistant
Yakima BaseClip 135:
- Custom-fit mounting clips and pads allow you to mount BaseLine towers on your vehicle with a naked roof
- Padded, stainless steel clips provide secure grip on your door jambs
- Snap onto DropHooks inside towers
- Protect door jambs from scratches and abrasions
- Powder coated for durability and rust resistance
- Molded rubber pads fit the contours of your roof
- Clip onto bottoms of towers
- Protect roof from scratches and abrasions
Yakima BaseLine Towers - Qty 4:
- 4 Heavy-duty towers mount Yakima crossbars to your vehicle with a naked roof
- Pair with 2 Yakima crossbars and BaseClips to create a complete roof rack
- Tower pitch can be adjusted 6 degrees forward and 6 degrees backward to level your crossbars
- Pivoting bases can be adjusted during installation to ensure towers are seated correctly
- Versatile BarBeds are curved to accommodate the elliptical shape of Yakima CoreBar and JetStream crossbars
- Also fit RoundBar crossbars with adapter
- Safe and easy installation with DropHook system and included torque tool
- DropHook clip holder adjusts on 3 axes for perfect fit on your naked roof
- BaseClips attach to hooks in tower assemblies and tighten for a secure grip
- Torque tool clicks 3 times when clips are secure - eliminates fear of under- or over-tightening
- Lockable with Yakima Same Key System (SKS) lock cores (Y07204 - sold separately)
- Weather-resistant stainless steel, glass-reinforced plastic, and elastomer construction with matte finish
8000427 Yakima Jet Stream Cross Bars - Aluminum - 70" Long - Qty 2 - Black
8006135 Custom Base Clips and Pads for Yakima Base Line Towers
8000162 Yakima Base Line Towers for CoreBar, JetStream, and RoundBar Cross Bars - Bare Roofs - Qty 4
Replaces 8000146
Video of Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Yakima HD Crossbars Installation - 2019 Ram 2500
Colin: Hey everyone, it's Colin here at etrailer and today we have a 2019 Ram 2,500. And we're going to go and do a test fit of this Yakima HD crossbar roof rack system. Now this has been designed to Mount to the base roof of your Ram 2,500. So you don't have any raised side rails or fixed mounting points or anything like that. It's just going to clamp on using your door jamb, and it's going to give you a really heavy-duty roof rack to let you load up your favorite rooftop accessories. Whether you've got a couple of bikes, maybe a kayak carrier, or even a cargo basket that you can load up cargo in.
That's going to help you conserve on space in the bed of your pickup and inside the cab. Now, like I said, this is a heavy duty roof rack that Yakima has made with these HD bars up top.These can actually support a load of up to 500 pounds. However, be sure to double check with your vehicle's owner's manual. I already know that that's going to be more weight than what the roof of your ramp can handle. So make sure you don't go over that specification in your owner's manual.
With our baseline towers, these are going to have a weight capacity of 220 pounds. So you're already limited to be able to go up to that 500 pound weight capacity, but still 220 pounds on your roof is a lot of weight. So you can be able to get a lot of stuff loaded up here, whether it's kayaks, cargo baskets, anything to that nature. The only thing I do want to point out about these HD bars is that these have tie-down points on the ends of them. These give you a nice point to be able to secure whatever cargo we might have up there.
Maybe you just got a paddleboard sitting on your roof rack, and you want to secure it. You can use those tie-down points to get those secured.Now, like I said, this is going to clamp under your door jamb right here. As you can see, we've got a pad and a rubber coated hook bedded right there. I'm just going to open up the door so you can see how it's attaching right now. So attached to our baseline tower, like I said, is that kit that is going to be designed for your Ram.
Just take this end cap off so you can see what's going on in the inside. We have that hook coming up and securing into this bracket system right here and then it just pulls up when we tighten down this bolt. It pulls up against the door jamb and just clamps down on top of your roof.And then this rubber pad sitting on top of our roof. That's going to help make sure it doesn't harm or scratch the finish of our Ram, and it's also going to provide a very secure connection. Now I'm going to put the end cap back on which is pretty easy to do. We also have these plastic locks which we can replace with the Yakima same key system. That'll provide more security for your roof racks and no one can come up and remove it.Now this rubber strip up top can actually be removed to utilize T-slot accessories. What you do is just pull it out from this point right here, just like that you would cut it to length for whatever accessory you want to use, or you can just remove it altogether if you don't want to cut it, and then you just slide that accessory through the end cap right there into that desired location, tighten it down and then you're good to go.Now I do want to give you guys a few measurements first from the top of our roof to the bottom of our crossbar, it's about three and one quarter of an inch. That should be plenty of space to get any clamp-on accessories underneath your crossbar without risking damaging your roof. Now, if we go from the top of the roof to the top of the crossbar, it's about five inches. That's something to keep in mind for any low clearance situations that you have that added height to your roof. So maybe pulling into your garage or something like that, make sure that it'll clear before you try to pull into your garage. And again, with the weight capacity, I want to make sure you guys know, make sure that you don't go over any of the weight capacities for baseline tower or your vehicles roof, use the lowest rating.Now that I've gone over some of those features I'll show you, you guys have to get this installed. Now we've got the front crossbar already installed. It's going to be the same process for the rear one. We're going to get it assembled on this table for you guys so you can better see what we're doing. I'm going to flip my crossbar over just to make it easier and a little bit. Now down here, we have our fit kit along with our baseline tower. What we need to do is get the baseline tower ready to go. When you start with these two pieces that come with your HD bars, you're going to go into that top channel right there. You just need push down until it clicks into place, like that and get the front side too, just like that.Now the silver base right here is going to have threads on the inside and it's going to go onto the screw that's in the middle right there. So we're just going to line it up. And then in order to access that screw, we need to flip it over and actually pull out right here to uncover it, right there in the center. With the included tool, we'll just start threading it on. You can kind of see how it's working right there. Now we don't want to go all the way. We just want to get the top edges of this silver piece lined up with our little black tabs on the end right there. We could probably go a little bit more. That should be good.Now with this pad, what we're going to do is just put the bracket onto the piece right there. You want to make sure the arrow is facing out away from the baseline tower. So it just goes on like that and we'll press it down on both sides so it's secure. Now we need to get that screw out of there so we can take the end cap off in order to get our baseline tower into that track. I'm just going to turn it over so that it falls into my hand. There we go. Make sure you hold onto this so we can re-secure our end cap after. But all we're going to do is just feed that piece into the channel.If it's a little tight at first, you may need to come back and loosen up that screw a little bit. Sometimes that'll help out. There we go. Now it's in there. Now, if you look closely, there's going to be a set of numbers on the bottom of our HD bar. Now per our instructions, we need to move it to the measurement specified in the instructions, which is 46 and a quarter. So I'll move it up until the edge is touching 46 and one quarter, just like that. And then we will tighten down that bolt all the way. That'll secure our baseline tower into the HD bar. Want to go until we hear those clicks. Now we also want to make sure that our bolt right here is secured, which when it comes in, it should be already, just like that. Let's go ahead and put our end cap back on, and our screw.And then from here, we're ready to throw it on our roof. And make sure you got both of your rear doors open. We're just going to climb up here and set it on our roof Just needs to sit right there. Now what we're going to do is grab our tape measure and measure our crossbar spread. Now what we're going to do is measure center on center between the bars with the included tape that Yakima provides. And we need to make sure that it's 32 inches, which is the measurement specified in our instructions. Okay, exact 32. So we'll go to the other side and make sure that it's also 32.Now we can get our hooks installed. I'm going to flip open that gray cap right there, and then all that's going to happen with this hook as you're going to slide it up in here until it hooks on just like that. Now you can see that it's really up high off our roof right now. So what we're going to do is come up to this bolt right here and then turn it clockwise and you'll see that that hook starts going lower and lower towards the truck. We're just going to keep going until it makes contact. We don't want to over-tighten it at all. So make contact, get one more turn and that'd be good right there. Now what we're going to do is tighten it up until it's flat on our door jamb. Well, we need to make sure we stop at that point.Just like that. Now what we need to do is repeat this for the other side and then once we have that hook fully making contact with the door jamb, rotate back and forth, going a couple of turns on each side, until it's fully secured. That's going to ensure that our roof rack sits center on our roof. It doesn't pull too much to one side. Now we've gone back and forth on both sides. Our driver's side is fully secured, so we're just going to finish up over here. Once you hear those audible clicks, that you also heard earlier when I was putting the roof rack together, it's going to let you know that the tool has inaudible 00:08:49 correctly. Now we can just shut our door, we'll put our end cap on and from here, we're ready to load up our favorite rooftop accessories and then hit the road. One of the one that's going to about do it for our look at the Yakima HD crossbar roof rack system on our 2019 Ram 2500..
Customer Reviews
Yakima BaseLine Roof Rack for Naked Roofs - JetStream Crossbars - Aluminum - Black - Qty 2 - Y66KB
Average Customer Rating: 4.8 out of 5 stars (115 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.by: TimN03/19/2024
Chevrolet Silverado
Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
by: Dave02/11/2024
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
by: Dave 06/24/2024
2018 Ram 3500
Shipping on time as always from etrailer and install easy with help of video.
by: 04/01/2024
Follow the instructions, and you can't go wrong on the self installation
by: John 09/06/2023
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
by: Todd06/24/2023
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
by: Paul08/16/2023
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
by: Todd06/24/2023
These bars are the cats meow! Love the look of an aircraft wing. Easily supported our 2 kayaks.
by: Ricardo03/03/2021
The JetStream crossbars are awesome. Unfortunately the box that these came ' in was damaged, and when I opened it both crossbars had scratches. It is only cosmetic, but when you pay top dollars for a good product you expect that it will be well packaged so is not damaged when shipped. If it wasn’t for the damaged packaging and scratches I would give it 5 starts.
by: Ian 07/02/2023
Mazda
Solid build quality and easy installation on my '21 Mazda CX-5.
by: Richard R02/20/2023
GMC Canyon
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
by: Roland01/08/2024
Well packaged and on time
by: Leslie 02/10/2023
Roof rack parts were ordered correctly and shipped quickly.
by: John05/07/2020
etrailer did an amazing job of having their collective together with regards to my latest order for a roof top rack. First of all, when you go to one these manufacturer websites, either thule, or Yakima, you realize just how complicated this task can be. etrailer does all of that for you. Package arrived earlier than expected and everything was correct the first time. I installed the product myself in under an hour. Done, Done, and Done.
thanks etrailer
by: Doug02/16/2022
First trip with the new rail system and it looks like it worked out just fine. Thanks to both of you and Kimberly for all of your help and follow up I do appreciate it.
by: Moparnut22808/20/2023
Great product fast shipping
by: Andrew08/01/2023
Great! Easy to install!
by: Evan D.03/08/2017
Subaru Outback Wagon
These load bars are GREAT! I specifically bought these because they can comfortably handle any kind of sheet goods, including baltic birch plywood which comes in 5'x5' panels; it's much easier to securely strap down plywood when it's not hanging off the ends of the load bars.
These extruded aluminum bars are light enough that they're not a hassle to install and remove - I only put them on briefly when I need them, so I've had them on and off a dozen or so times and it's easily a one-person task.
They are of course very long, so I can't deny that there's more opportunity to bang your head on them when getting in/out of the car, but they are no wider than the footprint of the car (Subaru Outback) itself so they're not at risk of hitting a pedestrian or anything.
by: Chuck S07/19/2016
I have ordered several Yakima rack parts and a front hitch for my '13 Ram truck. The sales staff was very helpful in getting me the correct parts and with timely shipping. The items arrived as predicted and are correct. They fit as they should and install was straight forward. I recommend these products and the service was excellent.
by: Chuck S07/19/2016
I have ordered several Yakima rack parts and a front hitch for my '13 Ram truck. The sales staff was very helpful in getting me the correct parts and with timely shipping. The items arrived as predicted and are correct. They fit as they should and install was straight forward. I recommend these products and the service was excellent.
by: Richard B.03/11/2018
Bought kayak racks. Took a while to put together, but they are very high quality. etrailer send a wrong part (digits on the part number were reversed), but it was very easy to get this corrected and I received the correct part in less than a week. I even spoke to someone on a Saturday afternoon about the mix up who was very pleasant! They have my vote.
by: Greg 06/07/2023
Nicole was beyond helpful!!!
by: Kevin07/04/2020
We had to wait on stock a little longer than expected BUT etrailer kept me informed of the progress. Once I received the products installation was a breeze thanks to the instructional videos.
by: Richard 04/06/2023
Good transaction. Arrived quickly, new in box.
by: Travis 09/04/2021
Really like these aero bars. Previous rack had round bars and these are noticeably quieter. Install was easy. Bars look and feel like quality equipment.
25
787
Show More Reviews
See what our Experts say about this Yakima Roof Rack
- 2019 Ram 1500 Fitment for Yakima HD Tracks and Tonneau CoverAs long as you can fit the 2" wide Yakima 60" HD Tracks # Y74MR so you have no less than 1/8" overhanging the outside of your truck bed side (see attached) you're good to go. This then allows you to use 2 sets of the Landing Pad 26 # Y75ZR and SkyLine Towers # Y53TR for a base system. The 66" Round Crossbars # Y00410 might work but I'm not sure if you'll have the clearance for that since I'm not sure where the Yakima tracks will sit. If they truly can sit in the middle of your rails...
view full answer...
- Converting RetraxONE MX Tonneau Cover on a 2021 Ford F-150 5-1/2' Bed To Add Crossbars Above BedI have a couple options for your Carolyn. The first is to replace your current side rails with the XR Rails # RTT-82381 on the Cover # RTX37VR so you will have the T-Slots. Other wise using a reack like the Adarac # A54KG would be an option as this places the rails about half way up your window and attaches to the stake bed pockets. If you go the route of the T-Slots you will want the Yakima Crossbars # Y00427, Towers # Y53TR and 2 sets of the Landing Pads # Y00221. For your keys you...
view full answer... - How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel TowingGenerally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
view full answer... - Why are the Malone SteelTop # MPG203 Not Confirmed to Fit My 2020 Toyota 4Runner with Raised Rails?I have a fitment answer for you. The reason why the Malone SteelTop Roof Rack - Square Crossbars - Raised, Factory Side Rails - Steel - 65" Long # MPG203 is not listed as a confirmed fit for your vehicle is because the 65" length of the crossbars are deemed far too long for your 2020 Toyota 4Runner Limited with raised factory rails. This is why the SteelTop 50" # MPG201 and SteelTop 58" # MPG202 are confirmed fits. You are right that the towers # MAL25YR will fit your vehicle. Also, another...
view full answer... - Recommended Roof Rack for a Hullavator on a 2011 Toyota Venza w/ the Moonroof and No Side Rails To use the Thule Hullavator item # TH898 on your 2011 Toyota Venza you're going to need to install a set of crossbars that extend 4" - 8" past the roof racks legs. This allows the lift assist function of the Hullavator to work. Since your Venza does not have a roof rack and you have the glass roof there aren't many options. There is a roof rack that will work for you since you do not have the side rails. You will want the roof rack by Yakima and it includes the following parts: Yakima...
view full answer... - How to Use Longer Yakima or Thule Crossbars for a 2009 Dodge JourneyIf you have longer bars from Yakima, like the 70" JetStream part # Y00427OR the 70" CoreBar # Y00423, then all you need for your 2009 Dodge Journey are the TimberLine Towers # Y33TR. If you happen to have Yakima round bars then you need the adapter # Y03536 as well. For your Thule bars you will need to use the Evo Raised Rail Feet # TH710401 with the 69" ProBar Evo Crossbars # TH713600 as the aero-style Thule bars have a limited mounting space underneath them and I don't think it will...
view full answer...
- Recommended Crossbars for Yakima Top Tracks On an A.R.E Camper Shell CX SeriesThe Thule TracRac CapRac Ladder Rack for Camper Shell/Truck Cap # TH29200XT is not actually meant to be installed into top tracks. This crossbar system is actually meant to be installed in fixed points on your camper shell so it's not going to work with your Yakima tracks. Yakima does offer a complete system - # Y47CV which includes everything, but since you already have the tracks you'd just need the crossbars # Y00427, the landing pad # Y00221, and the towers # Y53TR. These bars and...
view full answer... - Can Longer Yakima Crossbars be Used on 2023 Honda HR-V For Thule HullavatorYou can definitely use longer Yakima crossbars on your 2023 Honda HR-V for the Thule Hullavator Pro # TH898, but don't go all the way to the 70 inch # Y00427, as these are 20 inches longer than the recommended # Y00425 and will stick out way too much on your HR-V. So instead use the 60 inch Yakima JetStream Crossbars # Y00426. Then to complete the rack set up on your '23 HR-V you do have the right parts with the BaseLine Towers # Y28TR, and Fit Kits # Y06159 & # Y06181. In regards to...
view full answer... - Can Yakima or Thule Crossbars Fit with Rhino-Rack RT Track SystemWe have confirmed in the past that the Yakima Landing Pad 1 will fit the RT style tracks from Rhino-Rack so you can definitely use a Yakima setup for your application (which I would recommend over Thule even if we knew that Thule would work). You will need to following parts for a whole roof rack setup on your 2006 Dodge Sprinter 2500: Rhino-Rack RT-Style Roof Rack Tracks - # RRRTV208 Landing Pad 1 - # Y00221 (you need 2 of this kit) SkyLine Towers - # Y53TR Same Key System - # Y07204...
view full answer... - Parts Needed To Mount Rhino Rack Awning RR33200 To Yakima SkyLine TowersYes, I definitely recommend getting new crossbars with a top channel. The good news is you can use the feet you already have. It appears you have the Yakima SkyLine Towers # Y53TR. So the 70" Jetstream bars # Y00427 will be all you need to mount your Rhino Rack # RR33200 awning.
view full answer...
- Roof Rack Recommendation to use Thule Hullavator # TH898 on a 2021 Ram 1500We definitely have the setup you need to use the Thule Hullavator Pro # TH898 on your 2021 Ram 1500 with a bare roof. Whether you have a Crew Cab or Quad Cab, the absolute best option is to use the following Yakima setup: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06135 - Same-Key Lock Cores # Y07204 As far as the crossbars themselves, one of the things we need to make sure is that you have the required 4 inches of overhang past the towers in order for the...
view full answer...
- 70 Crossbar Recommendations to Use Thule Hullavator on a 2021 Ford F-150 SupercabYes! In order to have the 70-inch crossbars to use with a Hullavator # TH898 on your 2021 Ford F-150 Supercab, I recommend the following parts: - Yakima JetStream Crossbars - 70" # Y00427 - Yakima BaseLine Towers # Y28TR - 2 sets of the BaseClip Fit Kit # Y27FR - Yakima Same-Key Locks # Y07204 Not only do you receive an extremely aerodynamic system on your roof with the JetStream crossbars, you also have the required 4 inches of length past the feet in order for the Thule Hullavator...
view full answer... - How to Carry Up to 4 Kayaks on a 2020 Ram 1500Thank you for all of that info! So currently, as of April 2020, the only manufacturer to have a roof rack fit for your 2020 Ram 1500 New Body Style is Yakima which means that you're looking for the JetStream system. This consists of the 70" Bars, # Y00427, the Baseline Towers # Y28TR, and Fit Kit # Y06135. The Yakima JetStream crossbars are some of the best on the market and they are compatible with your Rhino-Rack Folding J-Style Kayak Carrier # S512. With that being said, all of the...
view full answer... - Are Rhino-Rack and Yakima Lock Cores Interchangeable for a 2013 Ram 2500The Rhino-Rack key and lock systems are not interchangeable with the Yakima SKS lock systems. I noticed you are looking at # Y02-500B which mounts in tracks. The tracks would have to be installed by drilling into the vehicle roof. If you want to avoid that and still have a Yakima rack you can look at other roof rack options for your 2013 Ram 2500. Provided that the truck has the Crew Cab you can use the following Yakima roof rack parts: JetStream Bars # Y00427 or CoreBars # Y00423 BaseLine...
view full answer... - Yakima Roof Rack System For Flush Rails On A 2021 Toyota Rav4I understand how it can be overwhelming at first, but that's why I'm here! I do like the Yakima Skyline Towers # Y53TR so definitely get those. The Skyline towers need to mount to what they call a Landing Pad. For your 2021 Toyota Rav4 you need the Landing Pad 23 # Y98FR. The landing pad will use a threaded hole inside your tracks to secure it to your vehicle and the Skyline towers will connect to that! As far as bars go, the longest crossbar length kitted for your 2021 Toyota Rav4 is...
view full answer... - Roof Rack and Kayak Carrier Recommendation for Leer Camper Shell with Tracks on a Ford F-150I have what you need! Even though we have amazing options for installing a complete roof rack system on your Ford F-150 with a Leer camper shell, installing the WingBar Evo Crossbars onto a track system is a complicated process. This is because with the WingBar Evo crossbars, they come with bottom channels that do not extend the entire length of the bottom of the crossbar. With that being the case, there is no way to fully determine what WingBar Evo crossbars you need unless we have the...
view full answer... - What Roof Rack Will Work with Two Sets of BigCatch Kayak Carriers on a 2018 Ford F-150?In order for the 33" Flints to work on your rack with the Yakima BigCatch Kayak Carrier # Y04091, you will need a minimum of 66" on your crossbars. I recommend the Yakima 70" JetStream Crossbars # Y00427 to give you a little extra room. From my research, I discovered that there are no raised or flushed rails on your 2018 Ford F-150. In addition to the JetStream bars, you will need the BaseLine Towers for Yakima Crossbars # Y28TR and the BaseClip Fit Kit # Y06135.
view full answer... - Roof Rack Recommendation to Use a Thule Hullavator # TH898 on My 2018 Ram 2500 Crew CabI can definitely help you out! For the absolute best setup to use with the Thule Hullavator Pro # TH898 on your 2018 Ram 2500 Crew Cab, I recommend the following setup: - Yakima JetStream Crossbars - 70" # Y00427 - BaseLine Towers # Y28TR - 2 Sets of the BaseClip Fit Kit # Y06135 - Yakima Same-Key Lock Cores # Y07204 With this roof rack, you receive the extra long 70" crossbars. With this length, you have the required 4-8 inches of crossbar length past the BaseLine towers needed on order...
view full answer... - Parts Needed to Install the PlusNut Hardware for Yakima Roof Racks on a Fiberglass RoofThe Replacement PlusNut Hardware Kit for Yakima Roof Rack Tracks # Y8880039 is the replacement hardware for the Yakima 42" Tracks for Roof Racks # Y01126 or the Yakima 54" Tracks for Roof Racks # Y01127 both these tracks include the PlusNut hardware. Since you have a fiberglass roof you will also need to get the Replacement Capnuts, Washers and Bolts # Y8810155 which is needed when installing on a fiberglass roof. To have a complete roof rack you would also need to pick up the Landing...
view full answer... - Are longer Crossbars Available For Yakima Roof Rack On 2017 Subaru ForesterIf you have the Yakima Black Jetstream crossbars on your 2017 Forester, the longer crossbars that will work with your roof rack are part # Y00426 for 60 inch, and part # Y00427 for 70 inch. If you have the Yakima CoreBar roof rack, replacement 60 inch crossbars are part # Y00422 and 70 inch are part # Y00423. If your roof rack has round crossbars you can use part # Y8810025 for 66 inch and part # Y00411 for 78 inch. You will need to check with your local authorities to see if there...
view full answer... - How to Fit Rhino-Rack Pioneer Platform Rack to 2019 Ram 1500 RoofI have a roof rack option for you, but unfortunately Rhino Rack does not currently have a Pioneer roof platform system that is designed to install directly onto your 2019 Ram 1500 5th Gen Crew Cab. For a roof rack for your truck, I recommend the Yakima JetStream Crossbars # Y00427 with the Baseline Towers # Y28TR and the Fit Kit # Y06135 because this setup provides an aerodynamic crossbar that has a T-slot to allow for easy installation of accessories. If you want a platform on top of...
view full answer... - How to Carry SUP and SkyBox 21 on Roof of 2006 Land Rover LR3Could you let me know if your Land Rover LR3 has factory installed tracks that run from the front to back or if the OEM roof rack is more of a raised type? I tried doing some research but was having trouble finding anything that looked like it was an actually OEM roof rack. If you could send me some pictures of your roof rack system that would help me know what you have.
view full answer...
- Best Roof Rack System for 2001 Ford E350 VanThe gutter mounts we have are actually really sturdy if you get the right ones and install them right. Technically, you should have more weight capacity off the gutter mounts since the weight is distributed vertically through the gutters vs racks bolted onto your fiberglass roof. A good system for your 2001 Ford E350 Van is the Rhino Rack system with Square Crossbars # RB1800B-2 and Gutter Feet # RL150S10. You can switch the square crossbars for aero ones with 71" Vortex Aero Crossbars...
view full answer... - Rhino Rack Batwing Awning Crossbar CompatibilityThe Yakima JetStream Crossbars # Y00427 do have the channel but the weather strip on the inside will make the install difficult. If you need the Rhino-Rack Batwing Awing # RR33400 to be safe, you need to get the Rhino Rack Vortex Crossbars # RRVA165B-2 or the Heavy Duty Crossbar # RB1120B-2 but you'll need the adapter kit # RR33101. There is a awning that will work with your current Yakima JetStream Bars, Its the Yakima SlimShady Awning # Y36VR.
view full answer... - Yakima Towers & Fit Kit For 2023 Ford F-150 SuperCrew For Yakima Round CrossbarsHi there Dale; yes you can absolutely just get the towers and fit kit for your 2023 Ford F-150 SuperCrew from Yakima to utilize your round crossbars. All you need is the following: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y27FR - RoundBar SL Adapter # Y03536
view full answer... - Recommended Kayak Carrier for 2020 Mazda CX-5The only hitch mounted option wouldn't be an actual carrier, but a support like the Malone Axis # MAL32VR. This would require the installation of a trailer hitch like the # 76138 you looked at. More than likely you won't need this to mount your kayaks on your 2020 Mazda CX-5. Your kayaks will fit completely on a roof rack with a kayak carrier like the one seen in the picture below unless they are incredibly long. If that is the case, then by all means you could add the # MAL32VR to help...
view full answer...
- Recommended Roof Rack for a 2023 Kia Sorento w/ a Naked RoofTo attach a roof rack to your 2023 Kia Sorento, with no roof rails, you will want the roof rack by Yakima and it includes the following parts: Yakima HD Crossbars - Aluminum - Black - 55" Long - Qty 2 item # Y01156 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR HD Bar SL Adapter for Yakima BaseLine,Towers - Qty 4 item # Y03541 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06175 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers -...
view full answer...
- Recommended Roof Rack for a 2023 Mazda CX-5 to Use the Thule Hullavator Pro Kayak CarrierIn order to use the Thule Hullavator Pro # TH898 on your 2023 Mazda CX-5 you will need to have a roof rack with crossbars that extend 4"-8" past the roof rack feet. If you have a roof that has no existing crossbars or rails, I recommend the 2023 Mazda CX-5 Roof Rack by Yakima which consist of the: - Yakima HD Crossbars # Y01156 - BaseLine Towers for Yakima Crossbars # Y28TR - HD Bar SL Adapter # Y03541 - BaseClip Fit Kit # Y06130 - BaseClip Fit Kit # Y06154 If you have flush mounted...
view full answer... - Parts Needed to Install Yakima Roundbar Roof Rack 2021 Ford RangerTo install a Yakima round bar roof rack on your 2021 Ford Ranger Supercrew with a naked roof you'd need the part numbers # Y28TR, # Y03536, # Y06124 since you already have the crossbars. Normally you'd additionally need the part # Y00408.
view full answer... - How Can I Tell if I have Fixed Mounting Points on My 2015 Mazda CX-5 for a Crossbar System?According to the specs I have, you may have fixed mounting points on those rubber strips on your 2015 Mazda CX-5. The way you can tell is if there is a small removable tab on those rails that cover the holes. I went ahead and attached a video of a 2015 Mazda CX-5 with fixed mounting points to give you perspective about what to look for. If you determine that you have fixed mounting points, I recommend the following setup: - Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 46" #...
view full answer... - Does Yakima Roof Rack For 2013 Toyota Prius Require Professional InstallI would tell them they could do it and not to bother with spending money to go to a mechanic or the dealer. Do you have a measuring tape of some sort? If so, that's it regarding the needed tools to install the Yakima rack on your 2013 Toyota Prius. So no tools are needed, it's light as a feather, and all you have to do is some measuring to get it installed. I am 1000% confident this is something you can do on on your own in about 30 minutes without any assistance. The correct fit for the...
view full answer... - Parts Needed to Install Yakima Round Bar Roof Rack on 2015 Toyota Tacoma Access CabFor your 2015 Toyota Tacoma Yakima has a round bar roof rack that is a confirmed fit but it uses the Baseline towers and not the Skyline towers so you would need the part # Y00409, # Y28TR, # Y03536, # Y06125, # Y06128. This is a 58 inch bar setup and based on install pictures I've seen of this rack on a similar Tacoma a shorter 48 inch bar would not fit.
view full answer... - What Kayak Load Assist Can I Use With My Lockrack For My 2016 Subaru WRXI do have a solution for you, but will not involve the Lockrack Loading Bar. You will still have to remove, or adjust the orientation, of the arms for this solution to work, but this method would be your only option. You can use the following items to help you load your kayak with the Lockrack Loading Bar. Yakima BoatLoader EVO Telescoping Load Assist - 28" Extension, part # Y04085. This load assist bar is stored in your crossbar when it is not in use. It has a weight limit of 80 lbs....
view full answer...
- Square Bar Roof Rack that Fits 2020 Ram 1500 Quad CabThule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
view full answer... - Recommended Parts For Carrying 4 Bikes and Camping Gear With a 2023 Honda HR-VThe Draw-Tite Max-Frame Trailer Hitch Receiver # DT57YR is our highest capacity receiver for your 2023 Honda HR-V. This receiver has a maximum tongue weight rating of 300lbs but be sure to verify you do not exceed any weight capacities given by Honda. I recommend pairing this with the Yakima RidgeBack Bike Rack # Y02458 to keep the weight down. This carrier weighs 35lbs and can support 4 bikes up to 40lbs each. You may need an Adapter Bar # Y02531 for any of your bikes with an alternative...
view full answer... - Roof Rack Recommendation for Bike Rack and Cargo Box on 2022 Toyota Corolla Cross with Naked RoofThanks for reaching out! For your application we'll need to stick with the Yakima JetStream system since Thule doesn't have a fit for your 2022 Toyota Corolla Cross naked roof at this time (January 2023). The 50" JetStream crossbars will be a great size for fitting both the Thule FastRide Roof Bike Rack # TH95JV and Thule Force XT Sport Rooftop Cargo Box # TH6356B. Here are the parts you'll need for the complete roof rack system: 50" JetStream Crossbars - Black # Y00425 or Silver # Y00428 BaseLine...
view full answer... - Parts Needed to Swap the Yakima CoreBar Crossbars from an Acura MDX to a 2022 BMW X6Assuming you're wanting to use the Yakima CoreBar Crossbars # Y00421 you're looking at, then yes you're just going to need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06179, BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06161 as well as the BaseLine Towers for Yakima Crossbars # Y28TR.
view full answer...
- BaseClips for Yakima Baseline Towers and RoundBar Crossbars on a 2023 Ford MaverickThe correct clip kit for your 2023 Ford Maverick with naked roof to use the Yakima RoundBar Crossbars # Y00409 and the BaseLine Towers for Yakima Crossbars # Y28TR with the RoundBar SL Adapter # Y03536 is the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06180.
view full answer... - Why Are 2 Different BaseClips Needed for Yakima Roof Rack on 2018 Chevy CruzeThe difference between the BaseClip Fit Kit # Y06110 and BaseClip Fit Kit # Y06126 just has to do with the length and angle of the clamps that fit to the door jambs on your 2018 Chevy Cruze. Yakima does a fantastic job at fine-tuning their fitment which is why they have a wide variety of BaseClip options and those options can vary between the front and back positions on any given vehicle. Here are all of the parts you need to install a Yakima roof rack on your 2018 Cruze: 50" JetStream...
view full answer... - Recommended Roof Rack for a 2014 Honda Civic Si CoupeTo add a roof rack to your 2014 Honda Civic Si Coupe you will want the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long - Qty 2 item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06125 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06143 This roof rack attaches to the groves inside your door...
view full answer... - Replacement Parts Available For A Yakima BaseLine Roof RackWe do have a good amount of replacement parts available for both the Yakima Roof Rack set up ( # Y00422, # Y28TR, # Y06150, # Y06148) and the Rhino-Rack Nautic SUP/Kayak Roof Rack # RR570 you purchased, so you definitely can. That said, I have all the Rhino Rack replacement parts listed below and a few of the parts for the Yakima set up. If you do not see what you are looking for, just let me know and I will see if we can get it for you. Rhino Rack: Cam Buckle Cinch Straps # RTD3 M6 x...
view full answer... - Quietest Cross-Bars For A 2017 Ford F-150 Super Crew CabFor your 2017 Ford F-150 SuperCrew Cab, we have several different options that will suit your needs. To start, we offer the Yakima JetStream Crossbars # Y00426. These bars are the quietest, are 60" long, and is rated for up to 165lbs. To go with those bars you will also need the BaseLine Towers for Yakima Crossbars # Y28TR, and the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06122. We always recommend using some type of locking system to keep all of your items safe; The Yakima...
view full answer... - Roof Rack Recommend for 2016 Honda CR-V to be Transferred to Truck Camper ShellI can definitely help you out with getting the most parts that will transfer over from your 2016 Honda CR-V! The Yakima roof rack is the way to go since it uses the longer 60" bars as they should transfer over to your truck cab nicely. The only problem is that the legs used for the naked roof on your CR-V won't be compatible with a track system so you will need to get new legs and a different fit kit for the tracks on your truck. A lot of truck camper shells do come with a track system...
view full answer... - Thule Kayak Carrier Recommendation for T-Slot Mount on Yakima JetStream Crossbars on 2022 HighlanderIt truly depends on what Thule kayak carrier you wish to use on the Yakima JetStream Crossbars. For example, the Thule DockGlide # TH896 is compatible with the top slots of the JetStream crossbars without any additional nuts. I definitely recommend the DockGlide because it is a saddle-mount style that is much easier to load than the awkward positioning of j-style carriers. In order to have a full JetStream setup of a roof rack on your 2022 Toyota Highlander, it depends on what roof type...
view full answer... - Recommended Roof Rack for a 2024 Acura RDX w/ a Naked Roof Congrats on the new SUV! Yes, we do have a way to attach a roof rack to your 2024 Acura RDX even though you do not have roof rails. It is the roof rack by Yakima and it includes the following parts: Yakima JetStream Crossbars - Aluminum - 60" Long - Qty 2 item # Y00426 for Black or item # Y00429 for Silver BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 item # Y06174 BaseClip Fit Kit for Yakima BaseLine...
view full answer... - Yakima Roof Rack For A 2022 Acura MDX With Flush Factory Side RailsFor your 2022 Acura MDX, I recommend the Yakima JetStream Crossbars # Y00426. These crossbars are 60" long, and have a maximum capacity of 165-lbs. Next, you'll need towers like the BaseLine Towers for Yakima Crossbars # Y28TR which have maximum capacity of 220-lbs. Following the towers, you'll need the BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06163 and # Y06178.
view full answer... - How To Secure Kayaks On 2020 GMC Sierra 3500 While 5th Wheel TowingGenerally speaking, you'll want the kayak centered in the carrier but you can push it a bit further forward if you have potential clearance issues with say the nose of a trailer. That said, there aren't really specifics on the overhang, you'll just need to use your best judgment. There will however be exact spots the crossbars will be installed as these are the points on the roof that the rack manufacturer deem strongest. The Yakima JetStream Crossbar System composed of part # Y00427, part...
view full answer... - Does the Rhino-Rack ROC25 Roof Rack Fit a 2021 GMC CanyonYes, the Rhino-Rack ROC25 Roof Rack for Naked Roofs # RR93GR will fit your 2021 GMC Canyon as long as you have the Crew cab model. If you have the extended cab model, you would need to use an alternative option. 2021 GMC Canyon Roof Rack by Yakima - Yakima JetStream Crossbars # Y00425 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06110
view full answer... - Square Bar Roof Rack that Fits 2020 Ram 1500 Quad CabThule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
view full answer... - Ladder Rack for 2021 Ram 3500 Compatible with Retrax XR Tonneau and Also Works On RoofYes, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover part # Y01151-5955 is compatible with the Retrax XR Series Tonneau Covers and the crossbars can be reused on the cab of a 2021 Ram 3500 if you purchase the BaseLine Towers for Yakima Crossbars part # Y28TR, the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers part # Y03541, and BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06135.
view full answer... - Best Roof Rack for 2019 Ford Focus Hatchback That Doesnt Make NoiseWe have the perfect roof rack for you to put on your 2019 Ford Focus hatchback which uses JetStream crossbars from Yakima. This rack is composed of: - JetStream Crossbars # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06135 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06105 The aerodynamic shape of the JetStream bars, along with their built-in WindRidges, is what ensures that this roof rack minimizes the...
view full answer...
- Parts Needed to Use Yakima Round Bars on 2013 Toyota Prius cSometimes we are able to find older Yakima fit info but I checked and they do not have a Q clip setup for the 2013 Toyota Prius c so the only option we have would be a new rack that would allow you to use your round bars. The complete rack for your vehicle consists of: BaseLine Towers for Yakima Crossbars # Y00146 BaseClip Fit Kit # Y06135 BaseClip Fit Kit # Y06179 Round Bar Adapter # Y03536
view full answer... - Roof Rack Recommendation to use Thule Hullavator # TH898 on a 2021 Ram 1500We definitely have the setup you need to use the Thule Hullavator Pro # TH898 on your 2021 Ram 1500 with a bare roof. Whether you have a Crew Cab or Quad Cab, the absolute best option is to use the following Yakima setup: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06135 - Same-Key Lock Cores # Y07204 As far as the crossbars themselves, one of the things we need to make sure is that you have the required 4 inches of overhang past the towers in order for the...
view full answer... - Recommended Base Clips for 2020 Chevrolet Silverado Crew Cab 3500For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124. The clips won't scratch the paint either.
view full answer... - Recommended Yakima BaseClip Fit Kit for 2014 Dodge Ram 1500If you are just needing the Yakima BaseClip Fit Kit for your 2014 Dodge Ram 1500, you can use part # Y06135. If your 1500 is the Quad Cab, the rest of the roof rack assembly will include # Y00422 for the two 60 inch crossbars and # Y28TR for the BaseLine Towers. I have attached an installation video for you to check out.
view full answer... - Yakima Roof Rack Towers for a 2020 Ram 2500For your 2020 Ram 2500 Crew Cab, the Yakima round bar you are seeking you need the following: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06135 (x2) If you just need one bar, then use Baseline Tower # 8880618 (x2), the Replacement RoundBar SL Adapter for Yakima StreamLine Towers - Qty 1 # 8880641 (x2),...
view full answer...
- Best Roof Rack for Carrying 2 Kayaks on a 2016 Ram 1500My recommendation would be the Yakima CoreBar Crossbar System which is composed of part # Y00423, part # Y28TR, and part # Y06135. This sturdy, aero bar package reduces wind noise and has a sleek look to compliment your Ram 1500. I also recommend using the etrailer.com J-Style Kayak Carriers part # E98878 for the kayaks you plan on carrying. This carrier comes complete with necessary tie downs you'll need for safe transport that won't scratch your paint. While the recommended Yakima bars...
view full answer... - Does the # Y00426, # Y00146, and # Y06135 Fit My 2019 Ram 1500 Crew Cab New Body Style?Yes! I confirmed with Yakima that the # Y00426, # Y28TR, and 2 sets of the # Y06135 fit your new body style 2019 Ram 1500 Crew Cab. To add theft-deterrence to your roof rack, I recommend using the Same-Key Locks # Y07204.
view full answer... - Required BaseClips for a 2016 Toyota Prius C Yakima Roof Rack KitFor your 2016 Prius C, you'll need both sets of BaseClips. Your complete kit will be the following: Yakima JetStream Crossbars, Black 50 Inches, part # Y00425 Yakima BaseLine Towers, part # Y28TR Yakima BaseClip Fit Kit, part # Y06135 Yakima BaseClip Fit Kit, part # Y06179 You will need BOTH BaseClip kits, part # Y06135 and part # Y06179. One will be to fit the front bar, and one for fitting the rear bar. The LoadWarrior, part # Y07070 is a direct fit for these bars, though you'll want...
view full answer... - How to Carry Up to 4 Kayaks on a 2020 Ram 1500Thank you for all of that info! So currently, as of April 2020, the only manufacturer to have a roof rack fit for your 2020 Ram 1500 New Body Style is Yakima which means that you're looking for the JetStream system. This consists of the 70" Bars, # Y00427, the Baseline Towers # Y28TR, and Fit Kit # Y06135. The Yakima JetStream crossbars are some of the best on the market and they are compatible with your Rhino-Rack Folding J-Style Kayak Carrier # S512. With that being said, all of the...
view full answer... - Are Rhino-Rack and Yakima Lock Cores Interchangeable for a 2013 Ram 2500The Rhino-Rack key and lock systems are not interchangeable with the Yakima SKS lock systems. I noticed you are looking at # Y02-500B which mounts in tracks. The tracks would have to be installed by drilling into the vehicle roof. If you want to avoid that and still have a Yakima rack you can look at other roof rack options for your 2013 Ram 2500. Provided that the truck has the Crew Cab you can use the following Yakima roof rack parts: JetStream Bars # Y00427 or CoreBars # Y00423 BaseLine...
view full answer... - Can Longer Rhino-Rack Crossbars Be Fitted on a 2018 Toyota Prius cIt looks like the Rhino-Rack crossbars that fit your 2018 Toyota Prius c have the 42" length. Sometimes you can use slightly larger or smaller Rhino-Rack crossbars but since you're wanting to use 54" crossbars that are 12" longer than what fits your vehicle we'll need to find you a different system. and for that I recommend Yakima JetStream system as it's the only roof rack system that doesn't have restrictions on upgrading the crossbars. Here are the parts you need: 50" JetStream Crossbars...
view full answer... - How To Carry a Kayak and Canoe on a 2019 Ram 1500 While TowingIn order to carry a canoe and or kayak on your 2019 Ram 1500 I recommend placing them on a roof rack with a roof mounted carrier as you don't really have any other options when towing a trailer. For a roof rack, I recommend the Yakima CoreBar Crossbar System which is composed of part # Y00423, part # Y28TR, and part # Y06135. This system has aero shaped cross bars for reduced wind noise and a sleek look. In order to secure a canoe and or kayak to the above roof rack, I recommend using...
view full answer... - What Roof Rack Will Work with Two Sets of BigCatch Kayak Carriers on a 2018 Ford F-150?In order for the 33" Flints to work on your rack with the Yakima BigCatch Kayak Carrier # Y04091, you will need a minimum of 66" on your crossbars. I recommend the Yakima 70" JetStream Crossbars # Y00427 to give you a little extra room. From my research, I discovered that there are no raised or flushed rails on your 2018 Ford F-150. In addition to the JetStream bars, you will need the BaseLine Towers for Yakima Crossbars # Y28TR and the BaseClip Fit Kit # Y06135.
view full answer... - Roof Rack Recommendation to Use a Thule Hullavator # TH898 on My 2018 Ram 2500 Crew CabI can definitely help you out! For the absolute best setup to use with the Thule Hullavator Pro # TH898 on your 2018 Ram 2500 Crew Cab, I recommend the following setup: - Yakima JetStream Crossbars - 70" # Y00427 - BaseLine Towers # Y28TR - 2 Sets of the BaseClip Fit Kit # Y06135 - Yakima Same-Key Lock Cores # Y07204 With this roof rack, you receive the extra long 70" crossbars. With this length, you have the required 4-8 inches of crossbar length past the BaseLine towers needed on order...
view full answer... - Is Yakima Base Roof Rack System the Same for 2012 Ford Focus Sedan and HatchbackThe 2012 Ford Focus sedan and hatchback use the same Yakima base roof rack. The parts are: Round 58 Inch CrossBars (2) part # Y00409 BaseLine Towers part # Y28TR RoundBar Adapters # Y03536 BaseClips # Y06135 and # Y06105
view full answer... - How to Fit Rhino-Rack Pioneer Platform Rack to 2019 Ram 1500 RoofI have a roof rack option for you, but unfortunately Rhino Rack does not currently have a Pioneer roof platform system that is designed to install directly onto your 2019 Ram 1500 5th Gen Crew Cab. For a roof rack for your truck, I recommend the Yakima JetStream Crossbars # Y00427 with the Baseline Towers # Y28TR and the Fit Kit # Y06135 because this setup provides an aerodynamic crossbar that has a T-slot to allow for easy installation of accessories. If you want a platform on top of...
view full answer... - 2013 Ram 1500 Crew Cab Yakima Round Bar SystemThe Q-tower fit kit for your 2013 Ram 1500 are the Q-Clips Y00607 which have been discontinued a few years back. The solution now for you to utilize Yakima round bars is the following system: -Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 -BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR -RoundBar SL Adapter for Yakima BaseLine Towers - Qty 4 # Y03536 -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06135
view full answer... - Recommended Roof Rack to Carry 2 Kayaks on 2014 Ford FocusWe carry many roof rack and kayak carrier options for your 2014 Ford Focus. The roof rack that I recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06135 and # Y06105. This will provide you with two crossbars to mount your kayak carrier to. You can mount your kayak directly to the crossbars, but to prevent scratching your kayak, I recommend using kayak carriers like the Yakima...
view full answer... - Best Roof Rack for 2020 Ram 1500 Crew Cab for Carrying Two KayaksThere is one roof rack that is the best for your 2020 Ram 1500 Crew Cab for carrying a pair of kayaks, and it is from Yakima. The reason the Yakima is the best is not only because of their quality and the way they minimize noise, but because this is the only rack that allows you to use 70 inch crossbars. Maximizing your crossbar space is really important for a lot of cargo, but particularly kayaks because they are so large. It means you'll have plenty of room for a pair and the large...
view full answer...
- Best Roof Rack for a 2013 Ram 1500Happy to help! Our site does have a lot of options which can often be confusing. The roof racks for your truck fit all three type of cab models but they are all listed individually which makes it look like there are more options. To add a Yakima roof rack to your 2013 Ram 1500 you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof...
view full answer... - Could Two Thule Hullavators fit on Yakima CoreBar for 2018 Ram 1500Since your Thule Hullavator # TH898 was made in 2017 that means that it is one that can be used on a Yakima roof rack for a naked vehicle roof like the Corebar # Y00422, # Y28TR, and # Y06135 which is a 60 inch crossbar setup and would easily be long enough for two Hullavators.
view full answer... - Square Bar Roof Rack that Fits 2020 Ram 1500 Quad CabThule offers a square bar roof rack that fits your 2020 Ram 1500 quad cab with the part # TH712500, # TH710501, and # TH145199. Then for a square bar roof rack the Thule Portage part # TH819 would work great.
view full answer... - Ladder Rack for 2021 Ram 3500 Compatible with Retrax XR Tonneau and Also Works On RoofYes, the Yakima OverHaul HD Adjustable Truck Bed Ladder Rack for Tonneau Cover part # Y01151-5955 is compatible with the Retrax XR Series Tonneau Covers and the crossbars can be reused on the cab of a 2021 Ram 3500 if you purchase the BaseLine Towers for Yakima Crossbars part # Y28TR, the HD Bar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers part # Y03541, and BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers part # Y06135.
view full answer... - Best Roof Rack for 2019 Ford Focus Hatchback That Doesnt Make NoiseWe have the perfect roof rack for you to put on your 2019 Ford Focus hatchback which uses JetStream crossbars from Yakima. This rack is composed of: - JetStream Crossbars # Y00426 - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06135 - BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers # Y06105 The aerodynamic shape of the JetStream bars, along with their built-in WindRidges, is what ensures that this roof rack minimizes the...
view full answer... - Parts Needed to Use Yakima Round Bars on 2013 Toyota Prius cSometimes we are able to find older Yakima fit info but I checked and they do not have a Q clip setup for the 2013 Toyota Prius c so the only option we have would be a new rack that would allow you to use your round bars. The complete rack for your vehicle consists of: BaseLine Towers for Yakima Crossbars # Y00146 BaseClip Fit Kit # Y06135 BaseClip Fit Kit # Y06179 Round Bar Adapter # Y03536
view full answer... - Roof Rack Recommendation to use Thule Hullavator # TH898 on a 2021 Ram 1500We definitely have the setup you need to use the Thule Hullavator Pro # TH898 on your 2021 Ram 1500 with a bare roof. Whether you have a Crew Cab or Quad Cab, the absolute best option is to use the following Yakima setup: - BaseLine Towers for Yakima Crossbars # Y28TR - BaseClip Fit Kit # Y06135 - Same-Key Lock Cores # Y07204 As far as the crossbars themselves, one of the things we need to make sure is that you have the required 4 inches of overhang past the towers in order for the...
view full answer... - Recommended Base Clips for 2020 Chevrolet Silverado Crew Cab 3500For a Yakima roof rack that fits your 2020 Chevy Silverado 3500 we have the part numbers # Y00422, # Y28TR, # Y27FR, and # Y06124 which is their Corebar rack. Of these part numbers the clips are part numbers # Y27FR and # Y06124. The clips won't scratch the paint either.
view full answer... - Recommended Yakima BaseClip Fit Kit for 2014 Dodge Ram 1500If you are just needing the Yakima BaseClip Fit Kit for your 2014 Dodge Ram 1500, you can use part # Y06135. If your 1500 is the Quad Cab, the rest of the roof rack assembly will include # Y00422 for the two 60 inch crossbars and # Y28TR for the BaseLine Towers. I have attached an installation video for you to check out.
view full answer... - Yakima Roof Rack Towers for a 2020 Ram 2500For your 2020 Ram 2500 Crew Cab, the Yakima round bar you are seeking you need the following: BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR RoundBar SL Adapter for Yakima BaseLine, SkyLine, TimberLine, and RidgeLine Towers - Qty 4 # Y03536 BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06135 (x2) If you just need one bar, then use Baseline Tower # 8880618 (x2), the Replacement RoundBar SL Adapter for Yakima StreamLine Towers - Qty 1 # 8880641 (x2),...
view full answer... - Best Roof Rack for Carrying 2 Kayaks on a 2016 Ram 1500My recommendation would be the Yakima CoreBar Crossbar System which is composed of part # Y00423, part # Y28TR, and part # Y06135. This sturdy, aero bar package reduces wind noise and has a sleek look to compliment your Ram 1500. I also recommend using the etrailer.com J-Style Kayak Carriers part # E98878 for the kayaks you plan on carrying. This carrier comes complete with necessary tie downs you'll need for safe transport that won't scratch your paint. While the recommended Yakima bars...
view full answer... - Does the # Y00426, # Y00146, and # Y06135 Fit My 2019 Ram 1500 Crew Cab New Body Style?Yes! I confirmed with Yakima that the # Y00426, # Y28TR, and 2 sets of the # Y06135 fit your new body style 2019 Ram 1500 Crew Cab. To add theft-deterrence to your roof rack, I recommend using the Same-Key Locks # Y07204.
view full answer... - Required BaseClips for a 2016 Toyota Prius C Yakima Roof Rack KitFor your 2016 Prius C, you'll need both sets of BaseClips. Your complete kit will be the following: Yakima JetStream Crossbars, Black 50 Inches, part # Y00425 Yakima BaseLine Towers, part # Y28TR Yakima BaseClip Fit Kit, part # Y06135 Yakima BaseClip Fit Kit, part # Y06179 You will need BOTH BaseClip kits, part # Y06135 and part # Y06179. One will be to fit the front bar, and one for fitting the rear bar. The LoadWarrior, part # Y07070 is a direct fit for these bars, though you'll want...
view full answer... - How to Carry Up to 4 Kayaks on a 2020 Ram 1500Thank you for all of that info! So currently, as of April 2020, the only manufacturer to have a roof rack fit for your 2020 Ram 1500 New Body Style is Yakima which means that you're looking for the JetStream system. This consists of the 70" Bars, # Y00427, the Baseline Towers # Y28TR, and Fit Kit # Y06135. The Yakima JetStream crossbars are some of the best on the market and they are compatible with your Rhino-Rack Folding J-Style Kayak Carrier # S512. With that being said, all of the...
view full answer... - Are Rhino-Rack and Yakima Lock Cores Interchangeable for a 2013 Ram 2500The Rhino-Rack key and lock systems are not interchangeable with the Yakima SKS lock systems. I noticed you are looking at # Y02-500B which mounts in tracks. The tracks would have to be installed by drilling into the vehicle roof. If you want to avoid that and still have a Yakima rack you can look at other roof rack options for your 2013 Ram 2500. Provided that the truck has the Crew Cab you can use the following Yakima roof rack parts: JetStream Bars # Y00427 or CoreBars # Y00423 BaseLine...
view full answer... - Can Longer Rhino-Rack Crossbars Be Fitted on a 2018 Toyota Prius cIt looks like the Rhino-Rack crossbars that fit your 2018 Toyota Prius c have the 42" length. Sometimes you can use slightly larger or smaller Rhino-Rack crossbars but since you're wanting to use 54" crossbars that are 12" longer than what fits your vehicle we'll need to find you a different system. and for that I recommend Yakima JetStream system as it's the only roof rack system that doesn't have restrictions on upgrading the crossbars. Here are the parts you need: 50" JetStream Crossbars...
view full answer... - How To Carry a Kayak and Canoe on a 2019 Ram 1500 While TowingIn order to carry a canoe and or kayak on your 2019 Ram 1500 I recommend placing them on a roof rack with a roof mounted carrier as you don't really have any other options when towing a trailer. For a roof rack, I recommend the Yakima CoreBar Crossbar System which is composed of part # Y00423, part # Y28TR, and part # Y06135. This system has aero shaped cross bars for reduced wind noise and a sleek look. In order to secure a canoe and or kayak to the above roof rack, I recommend using...
view full answer... - What Roof Rack Will Work with Two Sets of BigCatch Kayak Carriers on a 2018 Ford F-150?In order for the 33" Flints to work on your rack with the Yakima BigCatch Kayak Carrier # Y04091, you will need a minimum of 66" on your crossbars. I recommend the Yakima 70" JetStream Crossbars # Y00427 to give you a little extra room. From my research, I discovered that there are no raised or flushed rails on your 2018 Ford F-150. In addition to the JetStream bars, you will need the BaseLine Towers for Yakima Crossbars # Y28TR and the BaseClip Fit Kit # Y06135.
view full answer... - Roof Rack Recommendation to Use a Thule Hullavator # TH898 on My 2018 Ram 2500 Crew CabI can definitely help you out! For the absolute best setup to use with the Thule Hullavator Pro # TH898 on your 2018 Ram 2500 Crew Cab, I recommend the following setup: - Yakima JetStream Crossbars - 70" # Y00427 - BaseLine Towers # Y28TR - 2 Sets of the BaseClip Fit Kit # Y06135 - Yakima Same-Key Lock Cores # Y07204 With this roof rack, you receive the extra long 70" crossbars. With this length, you have the required 4-8 inches of crossbar length past the BaseLine towers needed on order...
view full answer... - Is Yakima Base Roof Rack System the Same for 2012 Ford Focus Sedan and HatchbackThe 2012 Ford Focus sedan and hatchback use the same Yakima base roof rack. The parts are: Round 58 Inch CrossBars (2) part # Y00409 BaseLine Towers part # Y28TR RoundBar Adapters # Y03536 BaseClips # Y06135 and # Y06105
view full answer... - How to Fit Rhino-Rack Pioneer Platform Rack to 2019 Ram 1500 RoofI have a roof rack option for you, but unfortunately Rhino Rack does not currently have a Pioneer roof platform system that is designed to install directly onto your 2019 Ram 1500 5th Gen Crew Cab. For a roof rack for your truck, I recommend the Yakima JetStream Crossbars # Y00427 with the Baseline Towers # Y28TR and the Fit Kit # Y06135 because this setup provides an aerodynamic crossbar that has a T-slot to allow for easy installation of accessories. If you want a platform on top of...
view full answer... - 2013 Ram 1500 Crew Cab Yakima Round Bar SystemThe Q-tower fit kit for your 2013 Ram 1500 are the Q-Clips Y00607 which have been discontinued a few years back. The solution now for you to utilize Yakima round bars is the following system: -Round 66" CrossBars for Yakima Roof Rack System (QTY 2) # Y00410 -BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR -RoundBar SL Adapter for Yakima BaseLine Towers - Qty 4 # Y03536 -BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 4 # Y06135
view full answer... - Recommended Roof Rack to Carry 2 Kayaks on 2014 Ford FocusWe carry many roof rack and kayak carrier options for your 2014 Ford Focus. The roof rack that I recommend is the Yakima Q Tower roof rack that includes two 58 inch crossbars, # Y00409, the BaseLine Towers # Y28TR, RoundBar Adapters # Y03536, and BaseClips # Y06135 and # Y06105. This will provide you with two crossbars to mount your kayak carrier to. You can mount your kayak directly to the crossbars, but to prevent scratching your kayak, I recommend using kayak carriers like the Yakima...
view full answer... - Best Roof Rack for 2020 Ram 1500 Crew Cab for Carrying Two KayaksThere is one roof rack that is the best for your 2020 Ram 1500 Crew Cab for carrying a pair of kayaks, and it is from Yakima. The reason the Yakima is the best is not only because of their quality and the way they minimize noise, but because this is the only rack that allows you to use 70 inch crossbars. Maximizing your crossbar space is really important for a lot of cargo, but particularly kayaks because they are so large. It means you'll have plenty of room for a pair and the large...
view full answer... - Best Roof Rack for a 2013 Ram 1500Happy to help! Our site does have a lot of options which can often be confusing. The roof racks for your truck fit all three type of cab models but they are all listed individually which makes it look like there are more options. To add a Yakima roof rack to your 2013 Ram 1500 you will need the following parts: Yakima JetStream Crossbars - Aluminum - Black - 60" Long item # Y00426 BaseLine Towers for Yakima Crossbars - Naked Roofs item # Y28TR BaseClip Fit Kit for Yakima BaseLine Roof...
view full answer... - Could Two Thule Hullavators fit on Yakima CoreBar for 2018 Ram 1500Since your Thule Hullavator # TH898 was made in 2017 that means that it is one that can be used on a Yakima roof rack for a naked vehicle roof like the Corebar # Y00422, # Y28TR, and # Y06135 which is a 60 inch crossbar setup and would easily be long enough for two Hullavators.
view full answer...
Do you have a question about this Roof Rack?
Info for this part was:
Edited by:
Daron K
Written by:
Alex H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.