To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.
Features:
Yakima JetStream Crossbars - 60" Long - Silver - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hey guys. Today we have a 2018 Nissan Pathfinder and we're gonna do a test of the Yakima Jet Stream Timberline Tower Roof Rack System. Now this is gonna be a great accessory to put on your raised side rails of your Nissan Pathfinder. It'll allow you to get your favorite accessories on top of your roof rack whether it's a bike rack, a kayak carrier, or even a cargo box.Now our roof rack's made up of two different parts. Up top, we're gonna have our 60 inch Jet Stream Crossbars. Now these are also available in silver, you'll see we have the black ones up top.
Just see etrailer for whichever color suits your vehicle best. Now we have a nice aerodynamic shape on our crossbars. That when combined with this rubber strip up top is gonna help cut down on wind noise and drag, even when we're traveling at high speeds.When we pop the end cap off, we're gonna have access into this T slot and what's nice is that we don't have to pull out the rubber strip and cut it to length like some roof rack systems. We just push down on it and then slide the T slot accessory all the way through and then tighten it down, and we're good to go. We just put our end cap back on like so.Now down below, what's connecting our Jet Stream Crossbars to our raised side rails, is our Timberline Towers.
Now these have rubber coated steel straps that come under our raised side rail and hook in up here, and you tighten 'em down, and it just squeezes onto that crossbar and just makes sure it's secure. We have our tightening bolt right here, and you can use the included tightening tool to cinch it down onto the raised side rail. And that rubber coated steel strap is gonna protect your raised side rail from any type of scratches or abrasions. We can put our end caps back on. We're gonna see we do have these pop locks up top.
We can replace those with actual Yakima lock bolts, which are sold separately here at etrailer and that could just give you more security for your roof rack.Now I'll go ahead and give you some clearance measurements. First from the top of our roof to the bottom of our Jet Stream Cross Bar, that's gonna be three and a quarter inches. Now it's plenty of space to get any clamp on accessories or any of our rubber coated steel strap accessories around our Jet Stream Crossbar without risking ruining the finish on the top of your roof. Now if we go from the top of our roof to the top of our Jet Stream Crossbar, that's gonna be 4 inches exactly. That's something to keep in mind for any low clearance situations, because you have added that much space to the top of your roof.Now we also are gonna have a weight capacity of 165 pounds, but double check with your Pathfinder owner's manual to make sure your roof can handle that weight.
Now that we've gone over some of those features, I'll show you how to get it installed.You see we have our front crossbar in place. The rear one's gonna install and assemble the exact same way. We'll start with just flipping over our Jet Stream Crossbar. Now we're gonna grab our Timberline Tower and we do have to do a little bit of assembly real quick. I'm just gonna take this black plastic piece and just pop it on like so until you hear it snap in.Now what we're gonna do is take this silver piece and it's gonna thread on that screw that's on the inside. So it's gonna get lined up on top of it and we're gonna flip over our tower and we're just gonna push the strap through like so and there's gonna be a bolt on the inside of that hole that's uncovered when you put the strap in. Grab our tightening tool. Again, to tighten down the silver piece and we're gonna go until it's level with these two black pieces right here. Once we do that, we're gonna go to the other side of our Jet Stream Crossbar and making sure that the open side of the strap is facing the outside of the bar. We're just gonna go ahead and put it in this channel.I need to just move it around a bit so it just gets caught on something. Once you get it on there, just pull it on. Now from here, we're gonna go back to that same screw and we're gonna tighten it down all the way. When you hear those audible clicks, you know it's tight enough. Take our end cap for our crossbar, put it on. Now we're ready to get it on our roof.Now when getting your crossbar on your roof, if you have a height restriction, go ahead and open up this door and climb up so that we can see the other side and we're gonna make sure we get that strap to go under the crossbar or at least just set up to do it and we'll do the same on this side. Also make sure that your rounded edge right here is facing forward, that's gonna be the front and now we'll grab our tape measure and get our crossbars spread before we tighten anything down.Now we're gonna measure our crossbar spread to make sure that our bars are parallel. It's gonna help make sure that all of your accessories mounted to the top work properly. We're gonna measure center on center from both crossbars. There's no set measurement. You just wanna make sure it's above 24 inches. I usually base it off of whatever accessory I'll be hauling that day. So get the measurement on both sides and then we can tighten it down.Now we're gonna tighten down two different bolts. We have this first one right here that's more noticeable that's gonna tighten down our strap against our raised side rail, and the one on the inside is gonna tighten down our Timberline Tower to our Jet Stream Crossbar to make sure that it doesn't move at all. It doesn't matter which one you do first, just get 'em both done. This one doesn't have to be too tight. So once you get it nice and snug, we'll move on to this next one.Now as you're tightening this one down, it's gonna get tighter and tighter. You're gonna keep going until you hear the audible clicks out of our tightening tool. Once you hear those, you know it's tight enough so we can grab our end cap and put it on. Now you're ready to load up your very favorite Yakima accessories and then hit the road.Now with all that being said, that's gonna do it for our test fit for the Yakima Jet Stream Timberline Tower Roof Rack System on our 2018 Nissan Pathfinder.
Average Customer Rating: 4.8 out of 5 stars (118 Customer Reviews)
Extremely quiet, aerodynamic crossbars attach to Yakima towers to create a stylish roof rack for your vehicle. Rubber strips in T-slots push down to load carriers or accessories - no need to trim. Full-length aluminum bars maximize carrying capacity.Excellent solution for my 2023 Chevy Silverado. In the past, I have had rails installed on the roof of my pickup trucks, but I find the BaseLine towers to be a better solution, since they don't permanently change the truck. Plus, they are much more solid than SkyLine system on the rails.
Love my Yakima roof rack!! It exceeds my expectations.great product. Also thank etrailer for the tec support! great staff always there to help thanks again!!
Follow the instructions, and you can't go wrong on the self installation
Really easy to install & work as specified. So happy with the customer support/service at etrailer.
Strong, Solid Bars, Super Light, and really easy to install!
Your notice of schemes was a lot better than the yakima site provided. They did not suggest the scheme you did.
But when the products arrived, the instructions were by yakima. Generally worked as instructed except the tower to tower transverse mounting dimensions needed to be tweaked for a perfect fit.
Five-star seller. High quality products, fast shipping. Thank you for a pleasant buying experience.
Ackage came 2 days early the install was somewhat easy (did it by myself)
Did not get to mount anything to it but seems really sturdy. One thing I can say is mark out your mounting points with provided stickers then put up and make adjustments to the roof rack.
Solid build quality and easy installation on my '21 Mazda CX-5.
Happy with the purchase. Crossbars shipped and received quickly.
So far so good. Purchased these towers to use on a 2022 GMC Canyon with HD bars that I already had, primarily to carry my canoe. Yakima's fitting instructions worked perfectly and the whole system seems really solid.
Well packaged and on time
Well you asked for it so;
I ordered this as part of my roof rack for a 2021 Nissan rogue. The complete roof rack set was unavailable le as one bracket was on back order and said would ship in under a month so I ordered everything else in the meantime. Little did I know it would take a over a year to get one stupid bracket and yes, I'm still waiting. I can't even return the items I bought because it's way past the 90 day policy even though they're brand new still in the box collecting dust. etrailer, this has been the worst experience I've had yet with you guys. Oh still waiting for my one bracket to complete my roof rack
Roof rack parts were ordered correctly and shipped quickly.
I waited several weeks for roof rack to arrive after ordering online. I am accustomed to Thule racks, but could not find any towers/bases to fit the 2019 Santa Fe. Once here, the Yakima rack mounted with ease and I look forward to hauling kayaks or basket on the roof.
Thank you etrailer.
Great product fast shipping
Great! Easy to install!
Work exactly as they should and hold everything securely to my vehicle without interfering with the car’s normal operation. etrailer had best prices based on my research. These bars are much quieter than traditional round bars and worth the added expense.
Easy to install thanks to the etrailer video. I have used the rack system on many long distance trips including driving from South Carolina to Yellowstone.
Easy to install and sturdy. I carry a 9' pontoon boat on my camper shell using this rack at freeway speeds with no problems.
Nicole was beyond helpful!!!
We had to wait on stock a little longer than expected BUT etrailer kept me informed of the progress. Once I received the products installation was a breeze thanks to the instructional videos.
The roof rack came packaged nicely and the instructions were simple to follow. I installed it in about an hour and we have already used it this past Memorial Day weekend. My wife loves the way it looks on her Mazda. Much better than the factory rack
Standard Yakima Equipmemt. Availability is sketchy but etrailer.com had it in stock!
Yakima is always great, the bars are just right for my kayaks and look great too.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.