Roof Rack Recommendation for a 2021 Nissan Rogue with a Bare Roof

Question

Question:

What Rhino-Rack roof rack will fit a naked roof on my 2021 Nissan Rogue?

asked by: Art

0

Expert Reply:

I have a great roof rack solution for you. Unfortunately, Rhino-Rack has not yet engineered a fitment that will work for a 2021 model Nissan Rogue. However, there is a great Yakima crossbar system that will work with your bare roof. For this route, here is the following parts you need:

- Yakima JetStream Crossbars - Aluminum - 50" Long - Qty 2 # Y00425
- BaseLine Towers for Yakima Crossbars - Naked Roofs - Qty 4 # Y28TR
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06179
- BaseClip Fit Kit for Yakima BaseLine Roof Rack Towers - Qty 2 # Y06161
- Yakima Same-Key Lock System # Y07204

With this setup, you will have a maximum crossbar weight capacity of 165 pounds. I recommend confirming with your owner's manual whether your roof can handle that much weight. The Yakima JetStream crossbars has a lot of the same features as a similar Rhino-Rack setup would have. For example, the JetStream has full-length top channels and an aerodynamic design. It also includes rubber stripping that minimizes wind resistance when t-slot accessories are not in use.

expert reply by: Bob C

0

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

The least visible trailer hitch for a 2024 Nissan Rogue is the etrailer Trailer Hitch Receiver #e93ZR.

view full answer...

Answer 3

Hey Alec, For your 2016 Ford Fusion I recommend the recommend a roof rack from Inno: Inno Aero Crossbars #INXB138-145 Inno Through Feet for Aero Crossbars #INXS250 Custom Fit Kit for Inno XS200, XS250, and INSU-K5 Roof Rack Feet #INK860 As with any…

view full answer...

Answer 4

There are a couple of differences between the two. The JetStream bars like #Y00425 are made of extruded aluminum while the CoreBars such as the #Y00421 you've looked at are constructed of galvanized steel. As you've mentioned, the CoreBar has…

view full answer...

Answer 5

The correct Thule roof rack that fits your 2024 Jeep Grand Cherokee with flush rails is the Wingbar Evo roof rack part numbers #TH711220, #TH710601, #TH68FE. The Wingbar crossbars are the quietest and most aerodynamic so they'll work really great…

view full answer...

Answer 6

Landing pad covers #Y8890029 are really the only option. You could always uninstall before the wash and reinstall the crossbars after if you don't like the way it looks. You could also stick to brushless car washes where nothing could get caught…

view full answer...

Answer 7

Hey Steve! I really like having the wiring sit next to the receiver as well so I definitely get where you're coming from. Here are the parts I recommend installing on your 2024 Mazda CX-5: - etrailer Trailer Hitch Receiver #e98902 - Curt…

view full answer...

Answer 8

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 9

Thanks for the photo, and so long as you use the Yakima SkyLine Towers, you can switch the rack to your 2016 Lexus GX 460 with the appropriate landing pads that fit it, the Landing Pad 30 for Yakima SkyLine And Control Towers #Y25ZR.

view full answer...