To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Features:
Inno Aero Aluminum Load Bar - 42" Long - Black - Qty 1:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today in our 2016 Ford Focus we're going to be test-fitting the Inno Aero Crossbar roof rack system, consisting of part numbers INXB130-138, these are the Inno Aero Crossbars 51 and 54 inches long. Part number INXS250, this is the Inno through feet for the Aero crossbars. And part number INK528, which is the fit kit for the Ford Focus. The Inno aero roof rack system is great for carrying a wide variety of accessories on your roof while freeing up space inside your vehicle. Both bars have a combined carrying capacity of 120 lbs, although you always want to double-check with your vehicle's manual to make sure it can withstand those weights. With the end caps, once you remove those, you can see it has a rubber strip in the center here.
Now that combined with the aerodynamic shape of the bar is going to cut down wind noise and drag while you drive. Also, since it has this rubber strip, you can use this with t-track accessories. Instead of having to cut the strip to length and put it around them, you simply just push it down and slide your accessories into place. Also, on each end with our feet here, they are lockable, so once you install this onto your roof it's going to be secure to your roof as well. Now that we've gone over some of the features of this roof rack system, let's go ahead and show you how it installs. We have our rear bar partially assembled on our table here, and next we'll take our through foot and put it onto the end here. We go to the end of our bar here, and slide this piece here all the way out so that bracket is sticking out.
Then we'll take our inner bracket, which comes with our foot kit, we'll push that into place like so, and it will fit properly. We'll push it back in til it gets to that point, then we'll take this top portion of our foot, we'll stick it into this portion here, they'll fit in together like so, and then you push them into place. The next step is we'll take a measurement to get the proper spread between our feet. Measure it out . looks good. Then we'll take our included Allen tool and tighten down our bolts in the center here.
Get that nice and tight. Next we'll install our fit kit, which is going to consist of the rubber pad here and our clamp. These are numbered, so always double check and make sure that they're going to the proper foot. Looking at the bottom of our rubber foot, we can see that it matches up with our foot here. That'll just push into place. Finally, we'll install our clamp.
Remove the screw at the end here, place our clamp on, and just reinstall the screw loosely, and now we're ready to set it on the roof of our vehicle. With the bar set in place, now we'll measure for our rear crossbar, and that's going to be from the center of our doorjamb to the center of the bar. You'll find this measurement in our instructions. It actually looks pretty much on spot there. Repeat this on the other side. With our measurements done, now we can start tightening them down. We'll get them snug up against the door first, then we'll tighten them down completely. Once you hear those clicks, it's completely tightened down to your roof. Our next step is to insert this foam piece here to the end to take up the space underneath to help out with wind noise and drag. Then you would cut it to length. But for demonstration purposes, we'll have to leave that out. Our final steps are going to be to install our end caps to our bars, which just push into place like so. Then our locking end caps, which insert like so as well. Once these are installed, we can install our accessories and hit the road. There you have it for our Inno Aero Crossbar roof rack system on our 2016 Ford Focus.
Average Customer Rating: 4.8 out of 5 stars (95 Customer Reviews)
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.Great profile. Looks good on truck.
Locking and unlocking very easy.
I bought these last summer to affix my kayaks to the roof of my corola. my husband, who is decidedly not a handy person, installed them in an hour and they've been great. no issues– slight whistling at times on the interstate, but that's to be expected. highly recommend!
2016 Golf R MK7
Love it so far
By far the best service I have received in a very long time. I recieved my inno flush feet areo crossbars, sooner than expected and the assembly was just as specified. I especially liked having the video with the tutorial.
I like the look of the low profile and the quality is outstanding. I have used this for my kayak and the low profile helps with the loading and unloading.
I would highly recommend this product and Company.
Arrived damaged after waiting 40 days for this item that was listed as in stock but was not! Then told it was in that it finally got to them and it was shipping. Then no ship! Called and was told it was there but they can not find it. Stocked in the wrong area! Finally received it. The damage on the cross bar was packed damaged. No damage to the box! A little unhappy.
Thank you etrailer my car looks great I spent 4 hours to ensemble this cross bar and the bask rack but finally I made it now I have more cargo space in my car I really recommend etrailer good quality items and good service thanks again
The roof rack arrived days before it was scheduled to. Everything ordered arrived intact. Assembly and installation were pretty easy per the directions included and the video on the etrailer site. The rack looks fine on my Maxda CX5 and the additional noise from the rack is not too bad. Haven't had my cargo box on the rack yet but anticipate no problems with it. My experience with etrailer has been first rate.
I bought this for my 2016 Fiat 500X which has two glass sunroofs, and it fits perfectly! Follow the directions, put the bars where it says to, and your glass will be safe. You can't open the sunroof while this is in place, but hey, at least you can haul gear on your roof without breaking the glass.
Josh is the greatest! Thanks for all the help!
Everything about this kit met my expectations.
- Perfect fit for my Ford Edge, as advertised.
- Lowest bar height that was still high enough for the Edge Vista roof to clear. The glass does clear when nothing is attached to the bars.
- Aero bar shape. I haven't done a lot of miles yet with only the bars and no other attachments.
I attached an Inno roof box (which still fits through my garage door!) and did a 2000 mile road trip at insterstate speeds. Except the box noise (expected), and a bit of a mileage hit, I had no issues. Secure fit the whole way.
Rack detached from my roof on the highway at about 70mph, taking my cargo container with it. Luckily, no one was behind me as it would have very easily caused an accident. Customer service was terrible and didn’t accept a return. Damaged the contents of the cargo container.Do not buy this product or from this company as they will not help.
I bought the whole kit for 2008 honda fit for a cross-country trip, and it performed great. Made it with two surfboards on top with no problems. Instructions for installation are atrocious, but youtube videos can fill in the gaps. Shipping was quick. I didn't use any of the customer service options, but it seems like they would be useful if needed.
I like that the feet don't extend too much beyond the width of the vehicle (2012 Toyota Prius V). No noticeable wind noise or fuel economy change. They held two bikes just fine. The tightening process feels very secure, but took me a while to do. I wasn't in a hurry so it was fine.
The Inno racks have handled an assortment of different loads without problems. They are quiet at highway speeds. The lack of tie down points are the only drawback with these racks.
fast shipping, great customer service, and easy to install
Fast shipping, great customer service and easy to install
Very happy with this this product while I had the vehicle they were on. Etrailers customer service is fantastic and I will definitely purchase from them in the future.
Inno makes the best products; high quality & easy to use
Easy and worked well with the total kit for our vehicle. Feel sturdy and strong. We’re happy with them.
Shipping and packaging was very good and delivered on time!
Love the flush bar look!
Great product and figment, the service was great as well, the only suggestion I have is if there is a product that cannot be shipped to Canada it should be told when you try to order it, however the follow up call was appreciated .
It was an easy install with instructions. The rack has held up well so far and looks good on the car.
Great Roof Rack! Looks very nice on my Ford Focus! Installing a rod pod soon! Quick Delivery! Outstanding product!
Easy install, build quality is really nice as is fit and finish. Almost no wind noise at highway speed.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.