To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.
Features:
Inno Square Load Bars - Black - 58" Long:Specs:
Inno Square Load Bars - Black - 58" Long:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Today, in our 2018 Ford Flex, we're going to be doing a test on the Inno Square Bar Roof Rack System.We'll be using part numbers INB147 for the 58 inch long black steel crossbars, and part number INSUT for the Inno feet for the square crossbars. Part number INK263 for the customer fit kit.This Inno roof rack system's going to allow us to carry roof mounted accessories on our Ford Flex. Things like bike racks, kayak carriers, roof boxes, and much more.It has the traditional square bar design. Now, these aren't going to be as quiet as an aero style. Like anything we put on a roof, it's going to make a little bit of noise. If you'd like to keep that down to a minimum, you can pick up a fairing to place on the front crossbar.Now, as I said in the intro, the bars are 58 inches long.
When mounted, we've actually got about 49 inches of usable space. That's more than enough room to put a few accessories. They're going to work with your standard clamp on accessories.The crossbars are held in place by four Inno feet. These are designed perfectly to work with our naked roof on our Flex. That way they don't harm or scratch that room.
The hooks that secure our roof rack system to the inside of the door jam also offers some protection. They're rubber coated, and they, too, are custom fit to work with our Flex.This roof rack system also includes locks. That way no one can remove it from our roof. This is a step up compared to other roof rack systems, where you have to pick up separate cores. This includes them, so you don't have to pick up any other parts.
You can see here how it even covers our hardware. That way, it cannot be tampered with.When using this roof rack system, if you have the sunroof option, I'd like to point out that you still have full operation of that.This roof rack system has a weight capacity of 220 pounds. That's a step up, compared to other roof rack systems. You're going to be able to carry a lot more accessories on this system without worrying about the weight. You do, however, want to check with your vehicle's owner's manual, to see if your roof can support that much weight.Now, I'll give you some dimensions.
This may help up when carrying accessories, or pulling and out of your garage. From the top of the roof to the underside of the square bar is about two inches. From the top of the roof to the top of the square bar is about three inches.Now that we've gone over the features, I'll show you how to go ahead and get in installed. We've already got our front crossbar in place. Let's show you how we did that.Per our instructions, we measured over from the two doors to center, on both sides, and got our placement. The rear one installs the same way. Let's go ahead and get started.I've already got one of my feet installed on the bar here. Let's do the other side together. We'll grab the other foot, and we're going to do some assembly. What I want to do is, we'll grab our hook. We're going to set it in place, on top of the bolt there. Then, we'll grab the locking bracket. Put that over top. Then, we'll take the large, square nut and start threading that on.We'll do a couple threads. We just want it loosely installed, like so. Then, we'll take that locking bracket. Set it over. We'll be sure that the opening is facing up, as you see it here. Then, we'll take our large nut and thread that on a little bit. We don't want to thread it on all the way. We want it loosely installed, like so.Now, before you put the foot in place on the bar, it's important that the ridges on the square bar are facing up. The way you slide it onto the square bar is you press down on the bolt here, where my thumb is. It releases the grip here. As we push down, you can see that move. From here, we can take it, while holding it down, and slide it in place. Then, as we let go, it grips and is locked in.Now, we need to take a measurement and make sure that our feet are in the correct position on the square bar. We can grab our included tape measure and, what we need to do first, is find the center of the crossbar. The nice thing is about the included tape, is that it finds the center of the bar for us. It's actually labeled. We'll zero it at the end of the bar, here. We'll stretch it out until we find the part number of the actual square bar, which is located right here. The part number is INB147. So, the arrow here marks our center.Now, you can do this a few different ways. You can mark it with a pen. I like to use my finger nail. Just give a little . Just apply a little bit of pressure, and then we've got our mark.From here, we can turn our tape measure around, place the zero on the center, and, per our instructions, we need to be 630 millimeters to the front of the foot, here. We can adjust our foot out. We're all set. We can repeat the same process with the other foot. Then we can put our end cap on. Just push it in place, like so. Then, we'll put on our base pad. it only goes on one way. Once you've got it lined up, just push it in place. Just like that.Once it's assembled, we can go ahead and set it in place on our Flex. We'll want to gently set it in position in the general area. With it set in place, we need to take one last measurement. Per our instructions, we need to measure 500 millimeters from the center of our two doors to the center of the hook. We can take our included tape. It is measured in inches and centimeters. So, 50 centimeters converts to 500 millimeters. We'll set 50 between our two doors and we'll measure to the center of our fit hook. Once we've got it in place, we'll want to be sure and check the other side, as well.Now we can start tightening them down. As we talked about before, we want to be sure that our locking bracket is facing upwards. If it has fallen down, you can just turn it back up, just like that. Then, we'll start turning that nut until it raises our fit hook up to make contact with the inside of the door. We want to do that for both sides.Now we can take our included tool and tighten them the rest of the way down. It's important that you alternate between the two sides. Do a few turns here, then a few turns to the other side. The nice thing about this included tool is it is a torquing knob. It's going to prevent us from over tightening and under tightening. Once we tighten it up to the correct torque setting, it will click.Once everything's torqued down, we can go ahead and take our locking cap. Make sure that it's facing up. Push it all the way on and lock it up. We're all set. Now we can load up our favorite roof mounted accessory, on our Flex, and head down the road.That's going to complete our test of the Inno Square Bar Roof Rack System on our 2018 Ford Flex.
Average Customer Rating: 4.7 out of 5 stars (296 Customer Reviews)
These steel, square crossbars attach to Inno feet to create a sturdy roof rack for your vehicle. Elastomer coating resists corrosion and helps cushion your load. Bars accommodate carriers and accessories that clamp around bars.Great looks, feels very sturdy. Super easy to install. Only downside is they are a little noisy, but that was expected from the square bars. Went with square bars to use my older Thule kayak and bike rack systems. I installed the Inno mounting system myself...no problem. Directions were very good!
Been a month haven’t received them yet they are in stock but guess we are waiting for one item which it’s in stock date gets pushed back every day. And the company doesn’t let the customer know the date changes or when they will send it.
Good quality rack system, easy to assemble and install, works well, looks good, fair price, I'm very satisfied with this purchase. I appreciate the guidance I received from William B. at the beginning of my search for a roof rack to carry a canoe on my 2015 Honda Civic. Two thumbs up for this purchase.
Easy to install and have worked great so far!
Super easy to install and remove. Lock feature is great
Works well, has stayed attached with no issues. We've used them (plus the bars) to keep a canoe and a rocket box on the car at different times throughout the year (not at the same time, it's on a tiny golf).
Incredible engineering: does not feel like an aftermarket rack. Easy to take off if necessary. Solid; highly recommend.
Perfection!!!
Perfect fit.
Perfect fit
Worked great! Traveled with a carrier on these racks from Chicago to Seattle. No issues, would buy again!
I have two standup paddle boards that literally live in the racks, and have since day one.
The racks are awesome.
Really great value! No need to spend a lot on Thule. Even those these are square shaped I actually don't hear much road noise. Besides, you're gonna have music playing or riding with the windows down anyway. I would definitely buy these again.
Everything was perfect
etrailer.com you guys are great every thing came on time. i bought the inno sq bar roof rack for its price point and i like the look. I have a thule roof box I need to mount . The SQ bars are a bit noisy so I plan on buying the rack faring. On the front mounting pads the directions say there is a gap but it seems extreme i will post a pic I also checked the measurements 3 times. when i get a chance i might re-adjust the front pads.. Please Advise
Odelia was extremely helpful in helping me choose the right product. I had an end-cap that was missing and she sent me whole package of four. This is the kind of customer support one hopes to receive when deciding to spend a few hundred dollars on a product. I will definitely return to etrailer if I need another car rack for our other car.
Just what I was looking for to put up my rooftop tent. These are also a fraction of the cost for Yakima bars.
I am a fifty-four year old single woman and being able to install these roof racks by myself makes me feel empowered!!
I watched a video emailed with my delivery confirmation of an installation on a similar vehicle all the way through first, and then watched it again as I did the steps myself, pausing when I needed to.
The products appear to be of high quality, were packaged/shipped neatly and it was easy to organize everything for installation. I couldn't be happier!
Installation is easy. Just follow directions. Front bar parts are different than rear bar parts so you need to look at part numbers and use in correct location. Rack is only rated for 100 pounds but looks and feels much stronger than rating. As noted square bars do create lot of wind noise when driving. Purchase this product to carry my Canoe and it does that at almost $200 less than other rack systems on market. For me the square bars are better fit with ratchet straps to hold Canoe down. Hard to find ratchet strap with hook to fit areo bars.
Dislike. No way to level square bars. With car on level ground high point to high point on bars is level. But each bar is off by 1/8" front to back. Wish they were round bars.
Waited till I put the new rack to work before review. Used it the first time today and it worked Great. Seems like a very durable rack system. Love that everything is rubber coated so it doesnt scratch the paint on your car. Installing instructions where a little confusing but found YouTube videos from etrailer on how to install exact rack system.
Quick and responsive customer service! Thank you etrailer!
Quick and responsive customer service! Thank you etrailer!
Great roof rack. Easy to install and du rable!
Good morning so the order I got is amazing I have a old school thule roof rack that I needed the write stuff so can start putting bikes on my roof an my fishing gear or some small stuff for off roading an it works great I will be sure to be buying more stuff from this site great job with the shipping it was very fast an packaging was great it was easy to install an it looks great on my 03 Toyota tacoma thanks again
Worked well for my 2006 Toyota Prius
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.