To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your BMW X3. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.
Features:
Specs:
TheThule WingBar Evo crossbars let you quickly and easily build a quiet, aerodynamic custom roof rack for your vehicle. These high-end bars look great on any vehicle, and they are perfect for those who want a quiet roof rack that can carry plenty of gear. The bars have dual rubber strips in the T-slots and pivoting endcaps that allow you to easily mount carriers and accessories. Each bar extends past the feet to maximize carrying capacity. The bars are constructed of aluminum with internal BoxBeam structures that make them extremely durable yet lightweight. The WingBars require a Thule foot pack (sold separately) to mount the rack to your roof. Some vehicles - such as those with a naked roof - may also require a vehicle-specific fit kit (sold separately).
Aerodynamic TrailEdge Design with WindDiffuser Strips
The WingBar's tapered TrailEdge shape helps reduce wind drag by separating the airflow over and under the bars so you won't see a reduction in your vehicle's gas mileage. This also dramatically reduces wind noise and vibration - even at highway speeds - and eliminates the need to add a fairing to your roof rack.
The rubber WindDiffuser strips in the T-slots have V-shaped ridges that direct air over the tops of the bars. This reduction in wind drag also helps maintain fuel efficiency and significantly reduces wind noise.
Channel-Mounted and Clamp-On Accessories
WingBar Evo crossbars have built-in T-slots with rubber strips that simply press into place. This makes them easier to install when compared with strips that have to be threaded into the channel from the end of the bar. The dual-strip design also makes accessories easier to install in the T-slots when compared with strips that have to be trimmed. Simply lift the SwingBlade endcaps open, slide your gear into the channel, and close the endcaps. These rubber strips also seal the gaps left by your accessories so that water and dirt don't get into the T-slots.
You can also attach most universal, clamp-on accessories and carriers to the bars.
Strong, Durable Construction
The WingBar Evo crossbars are made of anodized aluminum with internal BoxBeam structures. These structures strengthen the bars without significantly increasing their weight. Additionally, because the bars are aluminum, they won't rust or corrode so you can leave them on your roof year-round.
Hassle-Free Installation
Installation of the WingBar Evo crossbars is quick and easy, and you don't have to do any drilling or vehicle modification. The bars have bottom channels that accommodate your Thule feet. SmartSlide sliding scales in the bottom channels let you place the feet in the proper location using the vehicle-specific measurements provided in your fit kit manual. Simply slide each scale to the measurement indicated in the fit kit manual, then slide the foot into the channel until it rests against the scale.
For applications that don't require specific measurements provided in a fit kit manual - such as a raised rail - you can center the rack after you place it on your vehicle using a tape measure. Then slide the scales against the feet to fill in the gaps in the channel.
Insert the included rubber filler strips into each channel between the outer edges of the feet and the ends of the bars, and trim the excess. These rubber strips, coupled with the sliding scales, help to keep dirt and water out of the bottom channels and help to reduce whistling.
To complete installation on your roof simply tighten a single screw inside each foot using the torque tool included with the foot pack. This single attachment point enables you to secure the crossbar to the foot and the foot to your roof simultaneously.
Average Customer Rating: 4.8 out of 5 stars (729 Customer Reviews)
Premium, aerodynamic crossbars attach to Thule feet to create a quiet, stylish roof rack for your vehicle. Dual rubber strips in T-slots let you easily mount accessories - no trimming required. Simple to center and install with integrated scales.Easy to Install with the proper components. Everything fit my 2019 Lexus RX 350 perfectly
I ordered the Thule WingBar Evo Crossbars - Aluminum - Silver - 50" with the Evo Flush Rail Feet for Thule Crossbars - Flush Side Rails and the Fit Kit for Thule Evo Flush Rail and Edge Flush Rail Roof Rack Feet for my 2020 Mazda CX9. I appreciated the product selector to make sure I was getting all the correct parts. I was happy with the products, but I did run into an issue where 1 of the rail feet had a defective bolt which required a replacement. I was very satisfied with etrailer's customer support, and how well they worked with me to get the part replaced quickly. I'm giving this a 4 start only because of the hassle of receiving a defective one initially
Perfect width for Lexus RX350L. Used with Evo Flush Rail Feet and adapter kit. Also holds roof box well.
Stylish and suites the lines of the Lexus 450h. Quiet when installed - no noise. Beefier than the OEM cross bars by far!
I’d give a 4, since the rack is great, but the website picture gives the impression that there are core locks.
I have used these with both ski racks and big Thule cargo box. Nice and strong
Fit great on the Subaru. Only issue I had was manuf. didn't put instructions in box to indicate that rubber strips had to be torn apart and reversed to work which I saw in manuf website comments from several people.
The Thule WingBar Evo Crossbars were very easy to assemble. I used a YouTube video to review assembly. Assembly was a breeze. The crossbars and attachments made the task of installation of the rook rack simple. The Thule Evo roof rack system is sturdy and good looking.
eTrailer provided the Thule rook rack system very quickly. They are a knowledgeable and friendly company with whom to work.
This Evo crossbar set up worked great on my 2020 GMC Acadia. I would highly recommend this product.
Quality Thule product and arrived sooner than expected!!
There has been no extra wind noise with these bars, even at interstate speeds.
Fast shipping good selection
Thanks to etrailer.com, I found out these crossbar systems are just bags of interchangeable parts! So glad I didn’t toss my 2019 53” crossbars when they started whistling (Screeching!) at speeds above 45 mph. I had them removed from my ProMaster City van when I couldn’t stand it any more. Luckily i did some research and took them totally apart. The old raised rail feet were pretty trashed, but was able to clean the bars up and reuse the existing end caps and locks. The video instructions on etrailer.com were invaluable, and I was able to find the exact parts I needed. My 2019 crossbar system is like new at a fraction of the price id have paid for a new system!
Swapped vehicles from a flush rail system to a raised rail system with my evo bars. Fit like a charm and was all I needed. I swapped my locks over and it took 20 minutes to change it all. From BMW X3 to Bronco Sport
I bought these and the evo rail for my Subaru and they look great. Assembly was about 20 minutes from unboxing to mounting. The fit was perfect and they match the factory Subaru trim very well.
eTrailer made selection easy and the follow up from order entry, pack, ship and delivery was excellent.
Highly recommend searching eTrailer first.
Thule IS in my opinion the Best in Rack systems. There very well made and are pretty stout for my application with a roof basket. 52” X 80” Money well spent!! Thank You etrailer for The Best Service!
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Jenny N.
4/4/2023
It would be great if locks came with it however they are a separate purchase. Part # TH450400 would give you enough keys to cover the rack. It is a four pack of locks