Thule Roof Rack Fit on 2024 Honda CR-V With Flush-Mounted Rails

Question

Question:

I have a 2024 Honda CR-V with flush mounted side rails would a thule roof rack fit my car?

asked by: Cris

0

Expert Reply:

I checked with Thule, and there is indeed a Thule roof rack that fits your 2024 Honda CR-V with flush-mounted rails. Here are the exact parts you will need for the Thule roof rack for your '24 CR-V:

- Thule WingBar Evo Crossbars - Silver # TH711300 or Black # TH711320

- Evo Flush Rail Feet for Thule Crossbars # TH710601

- Fit Kit # TH52KE

- (Optional) Thule One-Key System Lock Cylinders # TH450400

expert reply by: Kyle S

0

Answer 1

I recommend checking out the Thule WingBar Evo Crossbars #TH711320. These crossbars measure 50" long, has a max weight capacity of 220 lbs, and has an integrated top t-track for use with roof mounted accessories. You're also going to need a…

view full answer...

Answer 2

I recommend using the Thule WingBar Evo roof rack on your 2024 Honda CR-V having the flush mounted roof rails. You will need the Crossbars #TH711320, Feet #TH710601 and Fit Kit #TH52KE. I prefer this system as the crossbars use a 2 piece channel seal…

view full answer...

Answer 3

Aside from a slight change in the appearance of the crossbar (the WingBar Evo has some boxed edges as opposed to the completely smooth front of the AeroBlade) the biggest differences are the rubber strip on top of the crossbar and the weight…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 6

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 7

Hey John, I used to have a 2013 Sienna, it was a great van. I can definitely help set you up with Rhino Rack Vortex Aero Crossbars for your 2014 Sienna. The Rhino-Rack #RRVA126B-2 that you mentioned is a set of crossbars only though, so additional…

view full answer...

Answer 8

Thanks for all the details! We definitely have a way to get a cargo basket and an awning installed on your 2024 Toyota Highlander, although the aftermarket roof rack systems will use a clamping system with your door jambs instead of mounting via…

view full answer...

Answer 9

The Rhino-Rack Roof Rack for Factory Tracks #Y02-490B-NT is going to be your best bet for the tracks on the ARE topper for your 2012 Toyota Tacoma. The weight capacity is 220 lbs like you mentioned, but that's going to be the highest you'll…

view full answer...

Answer 10

That's ironic because currently (March 2022) Thule doesn't have a fit listed for the 2022 Subaru Forester Wilderness. With that being said, from our research it looks like the Wilderness models on the newer Subaru vehicles won't affect…

view full answer...

Answer 11

Yes, your kick sensor for your hands free liftgate will still work after installing a Class III receiver on your 2024 Toyota RAV4 XSE. I have linked an install video near the bottom of the page for our etrailer Trailer Hitch Receiver #e23ZR being…

view full answer...

Answer 12

If you are using the Rhino-Rack Aero Bar Crossbars like #RRVA137B they have a dimension of 54" long x 3-1/8" wide x 1-3/16" tall which works for Thule boxes that use the PowerClick quick-release clamps, including the Thule Vector…

view full answer...