To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.
Features:
Inno Aero Aluminum Load Bars - 54" Long - Black - Qty 2:Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
How's it going, neighbors This is Ed here with etrailer.com, and we're taking a look at the Inno Aero Bars on our 2023 Audi Q5. The number one reason a person generally gets rooftop bars is to increase the amount of space they have for cargo and bulkier items. You know, with the Q5, you don't really have a large cargo area, so if you wanna add a rooftop carrier, maybe a rooftop tent, rooftop basket, any one of those accessories, this is gonna work with most of them. It's just a great way to make use of space that you normally wouldn't have to transport items. So you're gonna press the small tab here and remove our end cap, so we can take a look at our T-track. Essentially, this is gonna be about an inch tall, about an inch wide, and you have a under track slot for accessories as well that's about 10 inches.
So overall, if you have most accessories, they're gonna work with this bar. Let's see, as far as your overhang, you don't really have much going beyond the vehicle. But your rise here from the top is right at 2 1/2 inches on center, so that's gonna work with just about everything out there. You also have a keyed alike key for each one of your feet to secure your bars to the top of your vehicle, and that just removes really easily. Once you get this guy installed, if you loosen just the nut on the inside, you'd be able to just remove it whenever you need to take your rooftop bars off, if you need a car wash or you're just storing them for the season.
So let me show you how to install this on your Q5. I'm gonna hop into the install. Take your aero bar, and you'll notice there's a slot on the bottom of it. This is actually where you install your feet. So you're gonna push down the little black button, slide it in, and that'll free up the channel to install your foot.
Make sure with the end cap removed, you'll align the cleat at the bottom, and this guy will just snap into place once you pull up on the lever. So now, it's locked in and you can adjust for the spread of your crossbars. I'm gonna do the same on the other side. Grab your rubber pad, and you're gonna put that at the bottom of your foot. This is what's gonna help protect your bar against scratching.
And you're gonna take your pad with the barrel nut and install it on the inside here with the pad side facing the foot. And then the final part, the same way. And as you see, you're creating a clamp that'll wrap around your crossbar. And I just kinda hand tighten the bolt through that barrel nut that's in the inside clamp just to get it started to hold it in place. And I'll do the same on both sides, then we'll put it on top of our vehicle. And once you have your crossbars positioned, I use the fixed mounting points on the raised rail themselves. There's two holes on the back of here where I use my position for my spread, but since there isn't a fixed point for the Inno to work, you can position the spread however you need for whatever accessory you may have. Using the included torque wrench, you're gonna go from side to side, slowly tightening up till you reach your torque spec just to make sure you're getting even tightening, 'cause it can cause one side to lift up, you know, if you do it completely on one side versus the other. So I'm gonna hop to the other side, tighten a little bit more, and then come back, and I'll let you see what that torque click sounds like with the wrench. (nut clicking) (wrench cranking) And that's just the sound of everything settling, and once you hear that click, it'll no longer turn, and you've reached a specified torque requirement. And we're gonna take our cover with our keyed alike key and secure our crossbar to the vehicle. As far as the spread that you have with this guy, on center, you're right at 29 inches. But you do have the usage of the entire length of your raised rails on your Q5. So this has been a look at the Inno Aero Bars on top of our 2023 Audi Q5. Have a great day.
Average Customer Rating: 4.8 out of 5 stars (18 Customer Reviews)
Low-profile, aerodynamic crossbars create an aftermarket roof rack for your vehicle. Aluminum bars have T-slots that let you mount channel-mounted carriers and accessories. Flexible rubber strips in T-slots keep out dirt and won't need trimming.I've been a happy etrailer customer for years. Sales staff helped me pick out the right roof rack setup for my new 2023 Escape that worked with my low-profile rails. 3 separate boxes of pieces but they all came together perfectly. Very happy with my purchase and etrailer customer support! Rack is solid, low wind noise and will work with the accessories I need, kayak carrier and cargo basket.
Noisy driving down the road. The whistle driving at 60mph is ridiculous and the best part, you can’t even exchange them! Thank you for making me look elsewhere for anything that you sell.
Installation went pretty smoothly. The trick is to fully understand each step before moving to the next. There are a lot of small parts which at first was a little intimidating, but soon I was able to "get with it". I love the finished product and think you helped me get a good deal. Thank you for that
Installation was a little tricky but once the "feet" were attached to the roof and the bars properly spaced, everything wrapped up very well.
There is no noticeable wind noise with these installed.
Great fit for my 2023 4Runner and looks amazing.
I was concerned that other brands that clamp to the existing roof rails could pop-off from upward forces due to bumps/wind (I have 2 17’ sea kayaks) - these INNO clamps have a strap that securely holds the bars in place.
Perfect height to be able to get straps/clamps under the bars, but low enough to keep them from hitting my garage door opening.
Great quality and super easy to install.
We recently purchased 2 kayaks & Thule roof racks from our local outdoor store.
After waiting 2 weeks for our roof racks and J bars to come in we found that the Thule racks did not fit our 2017 Lincoln MKX and they didn't make any racks that would. The vehicle does not have roof racks and has a moon roof.
After a couple of days searching the internet we discovered etrailer.com. We found the Inno roof racks, but still was not sure they would work. We spoke to a repesenative and he assured us that the racks we chose would fit and the Thule J bars we did return would also work. As you can see by the photos 2 days later we were happy Kayakers.
One was extremely hard to get on compared to the others (not sure if it was rough machining or something), but once it was on, all was good.
These crossbars are awesome!
Easy install on 2021 4runner off road premium. Looks clean, matchs blacked out on white, eadges of chrome cap matches mirror accents and tail lights. Etrailer video was simple to follow. What it didn't show was the foam rubber strips that you put on under the t tracks slot. With cover off and top most flat part of clamp to edge of bar measures about 5.5inches. Make sure the clamp is flush with bar when you measure. Overall looks good
Tule and Yakima did not have a rack for my Nissan murano. So it was a blessing to find the immo rack. It seems like it can fit any car model. It's strong and secure. I feel my equipment will be safe with this rack.
I got my new rack very fast after I ordered it which was awesome I ordered the one I ordered because it had great reviews about road noise… Are used it Saturday didn’t hear anything which is also awesome my paddleboard did not even move on my rack I was concerned about air trying to lift it it’s easy to mount my paddleboard on top of my car and I couldn’t be happier here is a picture for reference...
Definite five star….having all glass roof we were handled super, guided from phone to delivery , video to guide are installing, quality product thank you we’ll be back
Well made product with durable components. Fit was good and assembly pretty easy. I would recommend this product.
They were so helpful. Geoffrey got me the parts the next day and the roof rack works great. Easy assembly. Just needed a little muscle power to click the final pieces together. Everything else was an easy bolt.
These bars look amazing on my 2014 Toyota Prius V. Held up the two kayaks extremely well.
Easy to install and extremely sturdy mount for my 2 SUPs. So thankful to have the roof rails and SUP mount on my Audi.
Solid product at a better price than most other rack bars. Has served me well for a year without any issues.
Fantastic
The trunk arrived in Poland in perfect condition. Packed in a hard cardboard box, it has not been damaged in any way. The trunk is made with great care, it is nice, solid and quite quiet. Thank you for a successful purchase.
Slick look on my 2022 taos!
Easy to order, easy to install and quite effective in it's use. Thank you.
High quality metal. Aerodynamic shape - I could not hear ANY wind noise being generated.
Easy install. Works great.
Check out my other review and pics....all the info is there
Good fit. Looks good.
Do you have a question about this Roof Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.