Clearsource Onboard RV Water Filter System - 2 Canister - 0.2 Micron - Indoor

Video Transcript for Review of Clearsource RV Water Filter - Water Filter Systems - CS27FR

Hello everybody, this is Jeff at etrailer.com. Today we gonna take a look at the Clearsource 2-canister Onboard RV water filter system. Now this is an indoor two-stage water filter system that'll purify water from your RV Park hookup. It'll give you a clean water for drinking, showering, cooking, washing dishes and more. It is perfect for full-time RV users or extended state camping. I wanna zoom in and show you the first stage, which is this one right here.

And this is the filter out of it. This is a 5.0 micron coconut shell carbon block filter. This will filter out chemicals and sediment to improve taste and smell, and then next to it right over here is the second stage filter, this is a 0.2 micron filter, which will filter out harmful bacteria, such as E. Coli, Legionellae and other bacteria. The canister they go in, you can see right here.

These are FDA grade oversized canisters. They provide high water flow for stable long lasting water pressure. And what's nice, they include this canister wrench makes it very easy to remove the filters. Basically you can see all you have to do with this, is just slide it up on there and then as you twist this you can loosen it. And when you turn it the other way it'll tighten it up.

So very easy to operate. Now the canisters do flow in one direction only. So your water will come in this way, go through the first filter, go through the second filter and then come out this way. The frame if you noticed that holds the canisters, it's a nice powder coated metal frame, keeps the canister stable. They do use the integrated half inch PEX adapters right over here on each end.

This allows you to connect to your RV's plumbing. And this is a one-time permanent installation inside your RVs utility bay. You notice on the very back of this frame, they have the pre drilled holes for easy mounting. Now the hardware to mount this is not included, you would have to supply that. Now this is IAPMO certified. It is made in the USA. A few dimensions on this. If we measure the width on this. It's gonna be right at 12 inches. The height of it. We go from the bottom, all the way to the top. That's gonna be right at about 12 and a quarter inches. And then the total depth on it, is right about seven and a half inches deep. Now the micron rating on the first filter we mentioned is 5.0, on the second filter is .2, the filter life on this is about up to 2000 gallons per filter. Operating pressure, the total range is 25 PSI up to a 100 PSI, and the ideal range is 40 PSI to 65 PSI. The flow rate on this is a 6.5 gallons a minute at 40 PSI. And the operating temperature range is 35 degrees Fahrenheit up to 120 degrees Fahrenheit. I wanna zoom back in just to show you. If we just unscrew this, I wanted to show you how the filters go in. And you can see there's your, you just take your filter, line up the hole in the bottom with the little stud portion right there on the top, and just bring it around, put it up under there, and then just start tightening it down. And once you get it tightened down enough again, just get your canister wrench in there. And again, you don't have to over-tighten this. You just need to snug it up a little bit. And then you'll do the same on this one. So it's very easy to change out your filters when you need to. Take that out the same way, has a nice o-ring up at the top to help seal it. Drop in your filter, make sure it lines up, and then get it to line up that way. And just thread it on. It's got large threads so it threads on pretty easy, and again just snug it up, and then use your wrench to tighten it up and then just like that you're all ready to go. But that should do it for the review on the Clearsource 2-canister Onboard RV water filter system..