bing tracking image
  1. RV Interior Lights
  2. Gustafson Lighting
  3. Vanity Light
  4. Incandescent Light
  5. Surface Mount
  6. No Switch
Gustafson 12V RV Vanity Light w/ Light Shades - 13" Long - White Glass - Satin Nickel

Gustafson 12V RV Vanity Light w/ Light Shades - 13" Long - White Glass - Satin Nickel

Item # 277-000325
Our Price: $57.83
RV Interior Lights
Shipping Weight: 3 lbs
Add to cart
In Stock
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Need help with installation?
Locate installers near me
Incandescent vanity light brightens up your RV bathroom mirror for your pre-hike morning ritual. Acrylic light shade has a stylish white swirl design that softens the glare of the bright light. Light can be turned on and off when wired to a switch. Great Prices for the best rv interior lights from Gustafson Lighting. Gustafson 12V RV Vanity Light w/ Light Shades - 13" Long - White Glass - Satin Nickel part number 277-000325 can be ordered online at etrailer.com or call 1-800-940-8924 for expert service.
  • All Info
  • Reviews (32)
  • Q & A (0)
  • Videos (1)
  • Photos

Gustafson Lighting RV Interior Lights - 277-000325

  • Vanity Light
  • Incandescent Light
  • Surface Mount
  • No Switch
  • 12V
  • 13L x 2-1/2W Inch
  • Satin Nickel
  • Gustafson Lighting

Incandescent vanity light brightens up your RV bathroom mirror for your pre-hike morning ritual. Acrylic light shade has a stylish white swirl design that softens the glare of the bright light. Light can be turned on and off when wired to a switch.


Features:

  • Incandescent vanity light is perfect above a mirror in your RV bathroom or bedroom
  • Included incandescent 921 light bulbs provide bright warm yellow light
  • Curved glass light shades with a frosted white swirl design soften the glare of the bright lights
  • Durable steel construction with satin nickel finish
  • Bolt-on installation onto the wall - hardware not included
    • Wires to a light switch inside your RV or camper - connect to ground and power
  • UL 39U4 listed


Specs:

  • Overall dimensions: 13" long x 3-1/2" tall x 2-3/4" deep
  • Base dimensions: 13" long x 2-1/2" tall x 1" deep
  • Mounting hole spacing (center to center): 11-1/2" long x 1" tall
  • Voltage: 12V DC
  • Incandescent bulb type: 921 or 912
  • Number of bulbs: 2
  • 1-Year warranty


Need a brighter light over the mirror in your RV bathroom so you can better see yourself while getting ready for the day? This vanity light gives you bright yellow incandescent light above the mirror in your RV bathroom or bedroom so you can get your morning ritual done before a fun day on the campsite. The frosted white glass light shades softens the glare of the light a bit so it's not quite so blinding.


Surface-Mount, Bolt-On Installation is Easy

This vanity light is easy to install as an upgrade or a replacement of your existing light. Using hardware (not included), bolt the light down onto the wall in your RV or camper. The light connects to ground and power and wires to an interior light switch. 2 Light bulbs are included, and its recommended to install them facing downward. When they burn out, they can be replaced by 921 or 912 bulbs.



GS5856215XZ14 Gustafson Lighting 12 Volt RV Bathroom Vanity Light - Wall Mount - 2 Incandescent Bulbs - Frosted White Swirl Glass - Satin Nickel





Video of Gustafson 12V RV Vanity Light w/ Light Shades - 13" Long - White Glass - Satin Nickel

Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.




Video Transcript for Review of Gustafson Lighting RV Lighting - Wall Light - 277-000325

Ellen: Hey everyone. I'm Ellen here at etrailer.com.Today we're taking a look at the Gustafson RV Vanity Light. This is going to be a very nice looking light for your RV to replace an OEM light or add a new one in if you didn't already have one. The thing that I like about this is that it's a really nice, heavy, well-made light. We'll have our nice, thick sort of swirly glass covering our lights.So it looks really attractive. Definitely something that's home quality or residential quality.

It's definitely going to elevate our RV and make it look really nice. It comes with the bolts included. I have it illuminated so you can see what it looks like turned on. I'll go ahead and turn out the lights in the studio so you can get a better idea of what it looks like in the dark. There we go.So a nice warm light to add in really wherever you'd want it.

I've seen them mounted vertically as well, so it's just kind of up to you as far as how you want to mount these. The bulbs do kind of point in a direction, so they're kind of angled down. That's how the manufacturer suggests to install them, but it's really up to you as far as how you want to mount it.This does come with just the two lights there. There is another configuration where it would be the same thing, it's just has a third little fixture. That's also available here at etrailer.com.

It's pretty easy to set up. I'm going to turn off my power source here and we'll go over that. We'll have two wires per light and it really doesn't have any distinction as far as which wires go to ground, which goes to power.So just take one of each from each light connect it to ground, connect it to power, and you're good to go there. And then it's going to be a four hole mount. So we'll have this little knob at the front that's going to tighten down on top of this bolt for this backing plate.

And that's what you actually mount to the wall. This portion mounts to the wall. We'll have the two holes on either side to mount in, and then you just attach the light to this.So backing plate mounts to the wall, light mounts to the backing plate. Not too hard to do, although it does not come with any mounting hardware. So you will have to pick up some hardware on your own and that's really going to just depend on where you want to mount this, what kind of screws, how long they need to be or anything like that.Put my hardware back on here. The lights that this works with, it doesn't come. It does come with the bulbs included, as I mentioned before. And those are going to be a 112 or 120, or excuse me, a 912 or 921 style bulb. They are incandescents. I'm just going to wiggle this guy out here so you can see what it's going to look like. That's the bulb style there. It's just like a little wedge style bulb. You can actually replace these with LED bulbs that are the same style if you want to make it a little bit longer lasting. So you don't have to worry about changing out those bulbs anytime soon.I'm going to try to get this in back in there without having to undo the fixture, but you can take the little glass piece off. If you undo the backing plate, there are screws in the back there to get better access to it, but you can kind of finagle your way in and replace that bulb in. It's just kind of at an angle as I said, so it can be a little bit tight to get in there.As far as measurements, the base is 13 inches long from edge to edge, and then about two and a half inches tall. Move this over so you can actually see that there. The metal part, two and a half inches tall. Our glass pieces are a little bit longer. Those are about three and a half inches tall. This is a surface mount, so this whole thing will stick out from your wall. The base is just about an inch. With our glass piece there, it's about two and 5/8 inches deep.This does work with 12 volt DC power. And overall, I think this is just a really nice light to add into your RV to elevate the look of it. We'll have our satin nickel fixtures, so it gives it a nice look and will give you some nice light as well. And that's going to do it for our look at the Gustafson RV vanity light.

Customer Satisfaction Score:


Customer Reviews

Gustafson 12V RV Vanity Light w/ Light Shades - 13" Long - White Glass - Satin Nickel - 277-000325

Average Customer Rating:  4.6 out of 5 stars   (32 Customer Reviews)

Incandescent vanity light brightens up your RV bathroom mirror for your pre-hike morning ritual. Acrylic light shade has a stylish white swirl design that softens the glare of the bright light. Light can be turned on and off when wired to a switch.

by:

I needed to replace a light fixture in the living quarters of our horse trailer. It's a very small space that is recessed, so there's not a lot of flexibility to accommodate a range of fixtures (and, it had to be 12V).

I spent hours searching around on the internet, and this was literally the only one I could find that would physically fit and ran on 12V. Installation was simple. This is solid fixture that should hold up well to being bounced around in a trailer.



by:

It showed up two days earlier than estimated!! Way to go E-Trailer!



by:

Product is excellent and at a great price. Beautifully made and sturdy.

Cons:
- No instructions
- Wire polarity not clearly marked and wires are all the same color
- No mounting hardware included

Michael

1/7/2019

Works fantastic. We are a full-time RV family so these are used day-in and day-out. Still going strong and they sip the juice!



by:

Great quality product. Very pleased with fixtures and service from etrailer



by:

Perfect replacement for the existing fixture that had a couple broke shades that was discontinued. Has the same look as the one in our other bathroom. Fits right into the decor.



by:

This is exactly what I needed. It looks great, gives off the perfect amount of light for the small vanity area at the very rear of my 1972 Airstream. I had to add a small toggle switch in the center of the base since I had no other way to control it. I mounted it directly over the 12v hot wire from the original mounted vanity light.

Harvel

1/21/2023

This vanity light has been a wonderful choice. Not only is it functional but the aesthetics are exactly what I needed for my vintage Airstream camper. It gives a quality touch. Thanks.



by:

took a little longer than expected to get but it looks great thanks



by:

Excellent quality and fast delivery. I would definitely recommend this company and have purchased several different products from them



by:

lights seem ok, installing soon. the packaging wasn't damaged but both had some bent parts



by:

Outside frame was bent up so bad on one corner that we couldn’t get the plate out that we had to attach to cabinet to mount it with. We had to get pliers and bend/straighten out the best we could. Didn’t have time to send back as we needed.

Etrailer Expert

Jenny N.

1/10/2022

I will have our customer service team reach out to you.



by:

We purchased the two- and three-light fixtures for the bathroom of our motor home. We were replacing the dated polished brass fixtures. We are very pleased with the quality of these fixtures. They are heavy and well-made, every bit as nice as a fixture you would buy at a lighting store. The brushed nickel looks very nice with our dark stained oak cabinets. Would definitely recommend this fixture.



by:

Love it! Arrived quickly, easy to install and looks great in our bathroom!

Melanie P.

9/30/2018

Still love it! Replaced the standard bulb with LED to use less electricity. The fixtures look and work beautifully! Hope they will not be discontinued so if we buy a different RV we can buy again!



by:

Actually bought two lights for the bathrooms in our RV. They look great and add improved light to the rooms. Installation was easy and have had no issues with them.



by:

Got this product in a timely matter, accurate and gear quality. Etrailer always stayed in touch with updates and tracking. Thanks for everything!



by:

Great little vanity light. This was a replacement for an old, somewhat dim light we had. Very nice bright light and really looks good too. Installation was very easy, took about 15 minutes at the most.



by:

We got our vanity light. it is a very nice looking light but a poor design you would have to take it off the wall to change the light bulbs. other than that it will work fine in the motor home bathroom. we got the led bulbs so hopefully they will last a long time.



by:

good product and service. I don't like it as well as the 3 light one I purchased earlier. It came with LEDs this one didn't but I put in LEDs.



by:

I am very pleased with this product, it was easy to install, looks great and is very well made. I have found my number one source for product purchase Etrailer is the best.



by:

Updated an old brass vanity light with this one. Plug and play. Looks great.



by:

Excellent replacement for our Newmar half bath vanity light.



by:

Look great!!! Perfect size.



by:

Love they way they look.
We tried to
match an existing light and it looks great.



by:

Love the light. Easy to install. Would definitely recommend.



by:

Nice lights!!
Just enough light, looks
good too..



by:


25
32
Show More Reviews

See what our Experts say about this Gustafson Lighting RV Interior Lights

Do you have a question about this RV Interior Light?


Info for this part was:

Employee Jameson C
Expert Research:
Jameson C
Employee Kathleen M
Installed by:
Kathleen M
Employee Mary K
Written by:
Mary K
Employee Wilson B
Updated by:
Wilson B
Employee Isabelle B
Updated by:
Isabelle B
Employee Noah M
Updated by:
Noah M

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.