Empire Faucets RV Kitchen Faucet - Dual Teacup Handle - Oil Rubbed Bronze

Video Transcript for Review of Empire Faucets RV Faucets - Oil Rubbed Bronze RV Kitchen Faucet Teacup Handles - EM59UR

Hi everybody, Andy here with etrailer.com, and today, we're gonna take a look at this Empire Faucets Oil Rubbed Bronze RV Kitchen Faucet with dual teacup handles. If you are considering upgrading your kitchen faucet in your RV or your camper to a gooseneck spout, this faucet might be a good solution for you. This is a dual handle, non-metallic faucet with the ABS plastic construction and an oil rubbed bronze finish. The quarter turn cartridge stems enable the faucet to fully turn on and off. It has a washerless cartridge design, it's gonna reduce friction and daily wear for long-lasting durability. Now, the gooseneck spout and the teacup-style handles, offer a classy look, and the spout provides complete sink coverage and rotates 360 degrees, and the standard-flow aerator has the water pressure needed to clean dishes faster and more thoroughly.

Does have a flow rate of 2.2 gallons per minute. This is a two-hole installation with the included deck plate and the mounting hardware, and I have it installed in my cabinet here for demonstration purposes with the included washers, so it's very easy to install. The inlet shanks have a standard male NPSM connections, and the inner diameter of the inlet shanks are half an inch, and the distance between the inlet shank, center to center, is eight inches. This will require tile and tub caulk, which is not included, that would be a separate purchase. This is ADA compliant.

And the overall height of this faucet, measuring from where you're gonna have this mounted to all the way to top center of our spout, actually right above the spout, we're gonna be sitting right at 13 1/8 inches, from, again, the top of the spout all the way to the base this will be mounted on, 13 1/8 inches tall. And then the width from handle tip to handle tip, we're sitting at 13 1/2 wide, that's the widest point of this faucet, and then from the center of the spout, center of the spout to the end of the spout, we are sitting right at 8 1/4 inches long, and then the plate dimensions, we're sitting right at 10 1/4 inches wide by 2 3/8 inches deep and about one inch tall. So again, this is the oil rubbed bronze finish, but we do have a few other finishes available if this isn't what you're looking for. We do have this available in a brushed nickel finish, and you can find that on our website using item number EM67UR, and then finally, a chrome finish, and you can find that on our website using item number EM57UR. Well, that's gonna conclude our look today, I do hope that it was helpful for you.

Again, my name is Andy, thank you for joining me..