Carr Custom-Fit Side Steps - Super Hoop - Black Powder Coated Aluminum - 17" Step - 1 Pair

I received the Carr steps with the wrong attachments. No problem, the correct attachment was shipped and I should have them installed soon.1615635

Fantastic quality, fast shipping. Unfortunately if installed for my particular vehicle would not leave enough ground clearance. Very disappointed I wanted and needed them so. Extremely good company, if yours fit, you’ll be pleased1542303

easy installation.. if u can read.. exactly what I thought I was getting1470447

by: Denis 08/29/2021

Mercedes-Benz Sprinter

Exactly as described. Fits Sprinter 35°0 and easy to install but makes the truck a little low. Very fast delivery1138311

Excellent service. Product arrived quickly. Very nice steps, easy install and good instructions.1278853

quick delivery & reasonable prices. They make sure everything is good!!905277

It was packet good, shipped fine, install was not bad, the bottom bolts for the mounts could be a bit longer but after working it some, it was able to be installed correctly and completely. It looks great and I hope lasts a long time. All in all I am very happy with the product.185518

1386074

1184203

Classic, elegant, and high-quality product. etrailer's shipping and website top notch! I highly recommend it!1480749

I wanted the Carr Super Hoops for my 2003 Chevy Express Van, but there was not a model listed for that application. I purchased the Model 124031 Carr Super Hoops since that model is the most versatile and includes the most varied hardware for the varied mounting applications.
Delivery was very timely as expected. Once received, the hardware seems of good quality and the black finish was just as I had hoped for.
I started by mounting 2 each 1” square tube spacers to the bottom of the existing Chevy foot well. The Chevy foot well turns out to be 2 thicknesses of body sheet metal with a stiffening ridge formed on the topside of the foot well (under the removable plastic foot well liner). I then thru bolted a 6”x24”x ¼” aluminum plate (6061,T6) thru those spacers to the bottom of the foot well with ¼” bolts. I was then able to mount each of the supplied Carr brackets to the bottom of the aluminum plate with 1, ¼” bolt and 1, #10-24 machine screw. The smaller (weaker) machine screws are expected to break if the hoop is hit from below by road debris or rocks.
Note that this installation leaves either the hoop frame to close to the ground, or the step surface angled significantly off of the desired horizontal. Therefore, I had to make some “treads” to mount on the step surface of the hoop frame. I chose to make these “treads” out of wood first to make sure I could make them work and look nice.
The new “treads” were successfully made on a table saw from a pine 2x6 and ended up being acceptably “level”. This installation left a shade over 10” of ground clearance below the bottom of the hoop frames (standard curbs seem to be between 8” and 9”). Now that I know how to make the “treads”, I plan to make a pair from some UV stabilized black plastic to replace the wooden prototypes.
If I were doing this over again, I could have just bought the cheapest model with the needed brackets. I was not able to use any of the extra hardware beyond the hoops and brackets themselves.
This installation makes entry and exit from the van much easier for my wife and I as well as our aging friends. I just didn’t care for the appearance of the full length running board systems.613843

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

Click to Enlarge

by: Sharon 12/11/2023

It was a great heavy duty product. We didn't install them because was needing them lower than what the mounting area would allow. Our Mother is 80 and we were trying to make it easier for her to get into their Ford pickup.1700545

Ordered these as a replacement for old ones.
One broke and the other lost most of the coating. Since those came with the truck I could not warranty.
New ones fit like a glove since I had the old brackets, 8 bolts and nuts and we're good to go!
Hopefully these will last another 8 years, if not I see the manufacturer has a lifetime warranty on them anyways.482541

Click to Enlarge

Very pleased with the quality and ease of install on these steps,
The crew really enjoys them and they appear to be holding up fine installed on the new ford's aluminum rockers.1674309

Click to Enlarge

Click to Enlarge

Exceeded expectations! Easy install and solid mount. Looks great on my old truck. etrailer continues to lead in service, communication and product selection. There was a small shipping delay, but the staff at etrailer kept me in the loop, notified me of everything that was going on and delivered an awesome product at a competitive price. Thank you all.381429

Click to Enlarge

Click to Enlarge

Amazing to order from somewhere new that had what we needed ASAP
Thank you for speedy delivery
Unbelievable
I will update when we put our nerf steps on my 2000 Toyota Tacoma
Thank you again1732771

The best price out of all other sites. I was so impatient for my product to arrive I even emailed etrailer asking about my order. They were kind enough to email me back with the information on the whereabouts of my super hoop steps. Following day it was here and I quickly went and installed them. Very easy and the i instructions were easy to follow. I love my super hoop steps and I got love for etrailer. I would totally recommend shopping with them or at least compare prices.558510

Click to Enlarge

Click to Enlarge

Everything fit. Easy to install and looks great!1772070

by: Ken03/28/2023

I installed these on my full sized '90 Bronco. They are great. Very sturdy. Long enough for the person in the back to get in and out of1545098

Click to Enlarge

Click to Enlarge

by: Glenn11/14/2017

Mine still look brand new after a year because they are still sitting in the box. Although the application included my vehicle, apparently you have to remove the body from the frame in order to drill the necessary holes in the narrow clearance areas. I might have liked the product if I could have installed it but that never happened.451953

Click to Enlarge

My 4x4 truck sits fairly high and these steps are just the ticket. Installation could not be easier. Drill four holes on the back of each rocker and bolt them on. The mounting brackets are plated and heavy guage. You will be supplied with more than enough hardware for installation. Included instructions are clear and concise, but really, this job doesn't require a degree in engineering!1542884

Awesome, we love it. Especially me now I can get up into the truck easy !1515835

Click to Enlarge

Click to Enlarge

Great price...fast shipping...great follow up.1705947

Extremely well made with a great hardware kit and detailed instructions for installation. Installation was quick and easy. 78232

Click to Enlarge

by: Nico07/02/2022

what I was looking for. Strong, well ma de.1318477