Carr Custom-Fit Side Steps That Fit a 2017 Ram ProMaster 2500

Question

Question:

Will these mount for front passenger and driver door on a 2017 Ram Promaster 2500? I would like the 17inch length but do not like the look of Grip Strut.

asked by: Aaron P

0

Expert Reply:

We do have Carr Custom-Fit Side Steps that fit your 2017 Ram ProMaster 2500, but it is the 7" Set # CARR105771 as opposed to the 17" Set # CARR125771.

If you think you will be able to get the 17" set to fit then you are more than welcome to try, I just can't guarantee a fit with the longer steps.

expert reply by: Jon G

0

Answer 1

Basically the difference between the two CARR steps you have part numbers #CARR125771 and #CARR105771 is the length of the step. The mounting brackets are the same. The CARR125771 is 17 inches long and the CARR105771 is 7 inches long. We do offer a…

view full answer...

Answer 2

I have a solution for you. I confirmed with Aries that the Aries RidgeStep Running Boards w/ Custom Installation Kit - 6-1/2" Wide #AA2055539 will only fit Ram ProMaster 2500s with a 159 inch wheelbase. With that being said, your best bet is the…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

For sag from towing a trailer the best recommendation I can make is actually a weight distribution system. Suspension enhancement will help level your truck while towing. But the advantage to a weight distribution system is that it levels the vehicle…

view full answer...

Answer 5

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Hey Mark, so the correct Blue Ox base plate kit to use with the Blue Ox Ascent tow bar part #BX4375. is the part #BLU53FR. For lighting you can use #C96JR, and not have to worry about cutting into the taillight housing as this plugs inline with the…

view full answer...

Answer 10

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

Carr Custom-Fit Side Steps That Fit a 2017 Ram ProMaster 2500

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching