To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Sturdy, rustproof aluminum rack clamps securely onto your truck bed rails and has mounts for a crossover-style toolbox. Slotted crossbars let you easily adjust the included load stops. Over-the-cab extension lets you carry pipes, lumber, and more.
Features:
Specs:
The T-Rac Pro2 mounts quickly and easily to your truck bed rails. Simply position the bases of the rack where indicated in the included instructions and secure them with the provided clamps. Each support base is held in place by 2 heavy-duty aluminum clamps. Torque the clamps down to ensure a substantial connection and you're good to go.
Included with the TracRac system is the cantilever extension, which attaches to the front crossbar to provide 32" of additional length over the cab of your vehicle. With this extension piece mounted, you can carry long loads safely and easily. The crossbar of the cantilever extension is constructed in the same fashion as the other TracRac crossbars, so that you get the same sturdy, aerodynamic styling throughout.
Included with the T-Rac Pro2 is a toolbox mounting kit that lets you mount your crossover-style toolbox without having to drill into your truck bed rails. Within this kit are 4 aluminum clamps that attach to your truck's side rails in much the same way as the mounting clamps. Each clamp has a pre-drilled hole in its center and comes with the hardware required to attach your crossover toolbox.
The sturdy aluminum crossbars on all TracRac truck racks feature integrated slots for mounting and easily adjusting accessories, such as the included load stops. These slots appear on both the top and bottom of the bars for the ultimate in mounting versatility.
A built-in trip strip at the front of each crossbar shields the slots from wind, maintaining the aerodynamic quality of the bars and preventing that annoying whistle you often find with slotted bars.
Included with the T-Rac Pro2 are 8 tie-down accessories. The 4 load stops are designed to mount in the slots of the crossbars and slide along them for quick, easy adjustment. To adjust a load stop, simply twist the quick-release knob, slide the load stop to the desired position, and then tighten the knob to secure the load stop in place. These bookend-style pieces help to hold ladders and lumber in place on the crossbars. They also have built-in loops for securing tie-down straps.
The 4 cleats attach at any of the provided mounting points along the outside of the upright supports so that you can tie down items that require additional anchoring or that sit in your truck bed.
The T-Rac Pro2 rack system is constructed of durable, lightweight aluminum. Because aluminum is lighter than steel - the material most often used for truck racks - only a small percentage of your truck's cargo capacity is taken up by the rack itself, enabling you to pack on more weight than you could with a steel system.
Even though aluminum is already rustproof, TracRac has taken the extra step of adding a dual powder coat finish to further protect the rack. The electrostatic powder coat (e-coat) clings to the metal surface better than traditional paint finishes for a more durable covering. The second coat is a clear finish that adds extra shine and protection from scuffs and scratches.
Alternate Instructions
Average Customer Rating: 4.8 out of 5 stars (11 Customer Reviews)
Sturdy, rustproof aluminum rack clamps securely onto your truck bed rails and has mounts for a crossover-style toolbox. Slotted crossbars let you easily adjust the included load stops. Over-the-cab extension lets you carry pipes, lumber, and more.
This bed extender works as advertised. I would highly recommend it to anyone that has an extended cab pickup with a short bed. This is great for hauling longer items around.
Best Company to work with, when you need to get things done quick for your service company. These Trac Rac systems work great with my Toyota trucks and have stood the test of time with my fleet. Easy to install, use and durable.
Great customer service
Well designed, well built. Pretty straight forward install. A little taller than expected on the Colorado. The cantilever hardware (nuts and bolts) is different than the rack hardware which; though of no consequence structurally, should probably be addressed by Thule to standardize the install.
My shipment arrived on time , but the box I ordered was damaged. When I informed customer service , they got me a replacement shipped immediately. Great service.
Do you have a question about this Ladder Rack?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.