Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs
Item # EM07705
Retail:$438.53
Our Price: $323.95
You Save: $114.58
Confirmed to Fit
2010 Chevrolet Silverado
1500 - 5-1/2 Foot Bed
1500 - 6-1/2 Foot Bed
1500 - 8 Foot Bed
2500 - 6-1/2 Foot Bed
2500 - 8 Foot Bed
3500 - 8 Foot Bed
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (260)
- Q & A (0)
- Photos
2010 Chevrolet Silverado - Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs
- Truck Bed
- No-Drill Application
- Fixed Rack
- Over the Bed
- Erickson
- Fixed Height
- 800 lbs
Carry ladders, lumber, and more with this aerodynamic truck bed ladder rack. Sliding load stops make securing loads fast and easy. Rustproof aluminum construction. Simple, clamp-on installation. Fits most pickup trucks.
Features:
- Heavy-duty truck bed rack lets you carry ladders, lumber, and more with ease
- Aerodynamic crossbars reduce drag and wind noise
- Sliding load stops help to keep cargo in place
- Just loosen hand knobs, slide load stops to desired position, and retighten knobs
- Easy installation with patented clamps - no drilling required
- Universal system fits most truck beds
- Rustproof aluminum construction
- Corrosion-resistant, yellow-chromate-plated hardware
- Compatible with most bed liners
Specs:
- Weight capacity: 800 lbs
- Crossbar dimensions: 66-5/8" long x 3-1/4" wide x 1-1/2" tall
- Upright support height: 29"
- Upright support base width: 12-5/8"
- Maximum distance between load stops: 35" - 36"
- 90-Day limited warranty
Note: Will not work with tonneau covers. If your truck has a bed liner some alteration may be required to properly install this ladder rack.
Easy, Clamp-On Installation
Sturdy, user-friendly clamps let you mount this rack to your truck bed without drilling or other modifications. Simply position the bases of the upright supports at the corners of the truck bed and clamp them to the lips of the truck's bed rails. Each base is secured to your truck bed rail with 2 clamps.
To install the crossbars, slide 2 bolts into the channel on the bottom of each bar. Insert the bolts into the mounting holes on the tops of the uprights. Center the bars over your truck bed, then secure them in place with hand knobs.
Sliding Load Stops
The load stops are easily adjustable along the crossbars. Just loosen the knobs under the crossbar, slide the load stops to the desired position, and tighten them.
Load stops are designed to prevent loads from sliding around, but they are also great to use as tie-down points for straps (sold separately) when you're carrying lumber, pipes, and other items without rungs that could potentially slide off the rack.
Rustproof Aluminum Construction
The ladder rack is constructed of lightweight aluminum so it won't take up much of your truck's carrying capacity and it won't rust. The installation hardware is also plated with yellow chromate to help prevent corrosion.
07705 Erickson Universal Contractor Pickup Truck Bed Rack w/ Load Stops - Aluminum - 800 lbs
Installation Details
California residents: click here
Customer Satisfaction Score:
97% were satisfied with this product
3% of customers were not satisfied
- Arrived Damaged
- Alternate product found
- Product did not meet expectations
Customer Reviews
Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs - EM07705
Average Customer Rating: 4.7 out of 5 stars (260 Customer Reviews)
Carry ladders, lumber, and more with this aerodynamic truck bed ladder rack. Sliding load stops make securing loads fast and easy. Rustproof aluminum construction. Simple, clamp-on installation. Fits most pickup trucks.by: Christopher06/19/2023
One year review requested by etrailer.com. Box arrived extreamly tore up. Rack was obviously used but not damaged. I contacted etrailer who gave me a 30% discounted return. Racks held up well but I noticed a crack in the weld on one of the bars shown in the picture. I've put a 32' extention ladder on it a few times but ususally smaller a-frames and a 28' extention a couple of times. I'll get someone to fix the cracked arm. Overall I'm fine with the customer service and performance for the price. I recently removed the handy triangular hold downs for the past winter since I wasn't using the rack.
by: Tom09/04/2023
Thus ladder rack has been a very useful addon for my Nissan Frontier. I recently re-installed on a 2023 Nissan Frontier Pro and it went smoothly. My only criticism is that the hand knobs for the adjustable load stops are too small for the task.
by: W05/01/2024
We have been using this for a year now hauling our 32 foot fiberglass ladder. Easy to install and remove each time. Great quality.
by: Alvin Clayton05/06/2023
etrailer exceeded my expectations. Item as described. Very fast shipping. Thanks!!
by: Adam06/22/2020
2011 Ford Ranger
They look decent enough and do exactly what I need. Super easy install. I think I'll be able to remove the rear one(4 nuts with a zip gun) slide my KLR 650 in the bed put the rear one back on load the canoe and scoot down the highway in my 2011 Ranger. Super happy with these at this price point.
by: John12/28/2022
1998 Toyota Tacoma
This rack was installed on my 1998 Toyota Tacoma X-cab one year ago. It is a rock solid rack. I've carried some heavy and long timbers on this with no worry. I'm sure it will last as long as the truck!
by: Richard06/02/2020
The rack was a good price. It was delivered 4 or 5 days after it was ordered. All the parts were there and no damage. It was VERY easy to assemble and put on my truck. It seems to be very solid and pretty well made. Seems to be a great value. I purchased to transport kayaks and lumber that does not fit into the short bed.Time will tell , but so far so good.
Richard
6/11/2021
The racks are still great after one year. They were a good buy. Price was reasonable and they are sturdy and well made. They are simple to install and remove.
by: Patrick01/20/2020
I am giving the racks a five, although have to say I have not carried anything of substance on them yet. I got primarily to carry two kayaks at same time. But I am happy with how they installed, and how they look and the general apparent integrity of the product. I had a bit of a delay for delivery due to factory, which necessitated the customer service team of eTrailer to hold back the shipment until I was back at my residence. They did an excellent job with this special request, and communication was always prompt and to the point. These racks also sold for about half of the price of what I suspect is their major competition; so that was a major decision point for me. I do not at this time feel I sold myself short by not going with the more expensive brand.
by: Bruce 06/07/2024
Great product, Great Price
by: Brian01/10/2023
This rack is awesome! At first I thought it might look too tall but using a small Colorado shop truck with pipe,Etc always hanging off the end it's tall enough that you don't have to think about hitting your head.Install was a piece of cake and it's adjustable.
by: Dale09/08/2020
1993 Ford Ranger
I used the ladder rack as part of my roof top tent trailer build. The rack is awesome. I was able to install it so the top is further apart than the bottom so the tent would attach properly. Very well made. And as usual the customer service was excellent. Thanks Hally C.
by: Bill08/28/2022
Very rigid when installed on my 2020 Ram 1500. No whistling while driving. One missing knob which etrailer is replacing. Kayaks firmly strapped when you loop the straps under the cross bar between the two boats.
by: Dennis M04/18/2017
2014 Ford F-150
Excellent product, I carry a 20' and 32' ladder on it every day. Super easy to load and unload ladders and other gear I have to carry daily! Very easy to mount and adjust! The end caps don't last long but I use the ends to attach ratchet straps.
by: EmJ09/16/2021
2012 Nissan Frontier
Bought this in conjunction with some kayak racks to carry 2 kayaks while pulling our TT in Nissan Frontier crew cab with short bed. Works great, does its job, not too hard to uninstall. Only warning to future users, if you have a utility track in the bed you may have to use a mallet to pound the J hooks to wiggle around the track when removing the rack.
by: Jeff Wenner06/27/2020
This is a great rack for kayaks.We could not haul our kayaks while we were pulling our camper.They would not fit in the truck box or in the camper.We ordered the rack and received it when they said it would be here.I installed it.The hardware was heavy,no cheap stuff. I bolted it on and it was rock solid.I put the kayaks on for our upcoming camping trip and they were also rock solid and out of the way.When kayaking is done I took it off and hung it in the shed.When I put it on this spring it bolted on beautifully and we are going again.A co-worker gave my wife your web address and i am very thankful they did.Great product!
by: Ray08/06/2017
2011 Nissan Frontier
The overall product quality was great.But the slider brackets had the wrong size hole and when I called they informed me that a few went out with that mistake.They didnt offer to send the brackets with the right holes or compensate me in anyway...not good business...my times worth something too...otherwise great deal thank you folks at etrailer.
by: Doug01/30/2021
Customer service, timeliness, and communication were all excellent! I will consider etrailer in the future!!
I gave 4 stars only because the product was scratched and should have been considered ‘used’, not new. I believe this was a factory issue, not etrailer! The product is usable even with the scratches and buff marks. And, it is exactly what I expected from the description. The one design item I did not care for is that the bolts stick up vs down; and, there was not an option for a cover to hide the sharp edge. Thanks!
by: John C07/03/2020
I believe this is just what the Dr. ordered. I’ll now have a way to get the kayaks, the camper, the grandson, and the wife all to the campsite and lake next week.
Installation was pretty easy even with load rails in the bed. Like I told the lady at another store when I was looking around for a solution “I need a rack, not a new truck. This was a very reasonably priced solution.
by: Gerald04/14/2020
The ladder rack install went easily into place. The J bolts for hold down interfered with the railing system a little and after I took a closer look, it seems like Nissan was in a hurry in fabrication. The rail system was installed at a slight angle away from horizontal. Other than that, good product and will easily hold my kayaks! Thanks!
by: Robert P.08/01/2017
2012 GMC Sierra
This is a great product. Simple to install and remove. Although it does not work with tonneau covers which I wish it does, I do like the design. The cost of this product is much cheaper that other manufacturers. It is built solid and its aluminum construction makes it light. I used this for hauling my 14' canoe for our camping trips.
by: Roland 06/19/2023
2016 Toyota Tundra
I have a Toyota Tundra, double cab, 6 ft bed. I needed to get some 16 ft long boards for my deck. The truck can't handle that so I found and bought the Erickson Truck Bed Ladder Rack. It was easy to put on and I was able to handle the the 16 ft deck boards. I have another deck to build and the ladder rack will make it easy to get the deck boards needed.
by: William03/17/2021
Installation and removal are extremely easy. The Ladder Rack is well made and much stronger than expected. I can carry my 15' canoe, or several pieces of lumber that are too long for my truck bed with ease.
by: Joe10/02/2020
2006 Ford Ranger
Installation was very easy, took about an hour and a half. I was able to install it on top of my over the rail bedliner by drilling 1.5" holes for the clamps. Seems well built and very solid. Happy so far
by: Timothy02/02/2020
2012 Nissan Titan
I like the mounting system. I guess I didn't read enuff reviews. I thought that a Nissan titan with a utility bed worked with bolt on system but. You have to remove the rails to clamp down ladder rack.
by: Stephen02/15/2018
2018 Chevrolet Silverado 2500
Here is my completed installation of the Erickson aluminum truck rack. Easy to install and definitely fits my needs of transporting kayaks. I could not be happier. Great value for the price. Thank you.
25
260
Show More Reviews
See what our Experts say about this Erickson Ladder Racks
- Will Adarac Aluminum Series Ladder Rack Fit 2002 Ford F-150 Super Crew with Short BedWhile the Adarac Aluminum Series Custom Truck Bed Ladder Rack # A4001223 won't fit your 2002 Ford F-150 with the 5-1/2' bed, we do have the Erickson Truck Bed Ladder Rack # EM07705 which does. This doesn't have the ability to slide like the Adarac ladder rack does but it does have an aluminum construction, is around the same price range, and it has a higher weight capacity of 800 lbs. This uses clamps that don't require the existence of stake pockets. Unfortunately there are no stand-alone...
view full answer... - Ladder Rack for 2019 Ram 1500 with 5.7 Bed LengthThule TracRac SR sliding ladder racks are awesome but they are made for 8-foot and 6-1/2-foot bed lengths only. We do have ladder racks for your 2019 Ram 1500 with 5.7 bed (and without the RamBox feature) that you can see on the linked page. The one I recommend for its combination of weight capacity, good looks and value is the Erickson # EM07705 which features lightweight corrosion-free aluminum construction and an 800-lb load rating. Please check out the linked video to see more on this...
view full answer... - Ladder Rack Recommendation for 2015 Nissan Frontier 6 ft Bed with Utili TrackMy favorite ladder rack that fits your 2015 Nissan Frontier with the utili track is the Thule TracRac SR part # TH43001XT-600 which installs through the stake pockets of your truck bed and gives you a ladder rack that has uprights that can slide forward and back as needed. I recommend this rack highly for your truck. It comes with load stops on the top of the bars which help secure cargo and is made in the USA.
view full answer... - Will Plastic Bed Liner Need to be Modified to Fit Erickson Ladder Rack on 2020 Ford RangerSince we were able to install the Erickson Truck Bed Ladder Rack # EM07705 on a 2020 Ford Ranger with a plastic drop-in liner and we didn't have to modify anything, I'm very confident that you won't have to modify anything for your application either if you install it in the same locations that we did. The only reason that we have those disclaimers is because sometimes the mounting locations for those legs can vary depending on the length of the load you need to carry. If the plastic liner...
view full answer...
- Material of Load Stops for Erickson Truck Bed Ladder Rack # EM07705The load stops included with the Erickson Truck Bed Ladder Rack # EM07705 are constructed of a durable black plastic. This allows for the needed strength while also maintaining the system's resistance to rust and corrosion. I have attached a short video demonstration on this ladder rack that you can check out as well.
view full answer... - Recommended Ladder Rack For A 2007 Toyota Tundra With Utili-TrackI have the perfect option for you with the Yakima OverHaul HD Truck Bed Ladder Rack for Toyota/Nissan Utility Tracks # Y01151-5868. This ladder rack comes with mounting brackets that can mount into your Utili-Track rails. I've attached a short video below where Aiden will walk you through the installation process so that you can get your kayaks loaded up and ready to go. The crossbars of this system have integrated tie down points on each end but you can slip additional tie-down points...
view full answer...
- Ladder Rack That Can Fit 2011 Ford Ranger 6 Foot BedWe have ladder racks that are a fit for your 2011 Ford Ranger like the Erickson part # EM07705 but we do not have anything from Adarac.
view full answer... - Kayak Carrier Solution that Fits Erickson Truck Bed Ladder Rack 07705We have a set of foam blocks that will fit the larger ladder rack crossbars as the Malone Foam Carrier part # MPG159 but we do not have a J-style carrier that will fit the Erickson ladder rack part # EM07705. This is due to the larger diameter of the ladder rack bars which allow it to have a higher weight capacity.
view full answer... - Kayak Roof Attachments Compatible With Erickson Truck Bed Ladder Rack # EM07705I reached out to Erickson and the ladder rack # EM07705 has crossbars that are 3-1/4 wide by 1-1/2 inches tall. That will make some Kayak carrier options unable to work and other still functional. The Rhino Rack Nautic Roof # RR571 and the Thule Top Deck # TH881 will not be compatible.
view full answer... - Best Value Bed Ladder Rack For 2019 Nissan Frontier With Utili Track SystemGreat question Valery. I do have options for you but there is not a Rola Haul-Your-Might ladder rack or a Thule TracONE option for the 2019 Nissan Frontier. The only Thule bed ladder rack option that fits the 2019 Nissan Frontier with the Utili-Track System is the Thule TracRac SR sliding rack part # TH43001XT-603 for a crew cab 5 foot bed, part # TH43001XT-600 for a crew cab or king cab with 6 foot bed. This Thule rack is considered a premium option because of it's sliding feature which...
view full answer... - Diameter Of The Crossbars On Erickson Truck Bed Ladder Rack # EM07705The Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs # EM07705 has crossbars that are 3-1/4 inches at the base and have a V shape. The height is 1-1/2 inches. This will be compatible with most Yakima kayak carriers like # Y04073 as well as the Thule Portage Canoe Carrier w/ Tie-Downs - Gunwale Brackets - Side Loading # TH819.
view full answer... - Availability of Ladder Rack for a 2001 Ford F-150 that Will Fit with TonneauThe Erickson ladder rack part # EM07705 attaches to a vehicle bed rail by wrapping around the inside of the bed rail so it would not be compatible with a tonneau cover. The only style of ladder rack and tonneau that can work together are the tonneaus that install to the inside of the bed rails and then the ladder racks that attach to the top of the bed rails. Most of the time this style attaches to the stake pockets. For your 2001 Ford F-150 with an 8 foot bed you would need a ladder rack...
view full answer... - Will the Rhino Rack Ski and Fishing Rod Holder Fit on Erickson Ladder Rack BarsYes. Because the crossbars on the Erickson Truck Bed Ladder Rack # EM07705 are 3-1/4" wide x 1-1/2" tall, the Rhino-Rack Ski and Fishing Rod Holder # RR572 can attach to them without any issues.
view full answer... - Does Erickson Truck Bed Ladder Rack # EM07705 Fit 2018 Ram 1500 Crew CabYes, the Erickson Truck Bed Ladder Rack # EM07705 that you referenced does fit your 2018 Ram 1500 Express with a crew cab. We confirmed this with out contacts at Erickson. I attached an install video for this ladder rack on a similar 2016 Ram 1500 for you to check out as well.
view full answer... - Height Added to Truck Bed When Erickson Ladder Rack EM07705 is Installed I checked with Erickson and loadstops on the bars of the Erickson Truck Bed Ladder Rack # EM07705 add 6 inches to the height of the bars. That means that the overall height of the rack from the top of the bed rails to the top of the load stops will be 35 inches.
view full answer...
- Is the Erickson Truck Bed Ladder Rack EM07705 A Confirmed Fit for a 2018 Ford F-250The Erickson Truck Bed Ladder Rack w/ Load Stops part # EM07705 will fit both bed length options for the 2018 Ford F-250, 6-3/4' and 8' long. In regards to the crossbar length of 66-5/8" long, the uprights that attach this to the truck bed which are adjustable angle out so even if your bed is wider/shorter than this it will still work for you. If this does not answer your question please clarify this for me that way I can better assist you.
view full answer... - Carrying Three Kayaks On Erickson Ladder RackThe Erickson Truck Bed Ladder Rack w/ Load Stops - Aluminum - 800 lbs, part # EM07705, has crossbars that are 3-1/4" wide and 1-1/4" tall at their peak. They are not compatible with most of our kayak carriers, including the Rhino Rack options. We have gotten confirmation from Swagman that this ladder rack, Swagman Contour Kayak Carrier w/ Tie-Downs - J-Style - Fixed Arms, part # S65148 is compatible with the Erickson Truck Bed Ladder Rack. Unfortunately, you may not be able to fit three...
view full answer... - Is The Erickson Truck Bed Ladder Rack Compatible With A 2019 Toyota Tacoma With Deck Rail SystemThe Erickson Truck Bed Ladder Rack w/ Load Stops # EM07705 is unfortunately not compatible with 2019 Toyota Tacoma with deck rail system, but we do have a comparable fit with the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799. This rack is designed to work with your factory utility track system, the truck bed ladder rack clamps onto your side rails for easy, no-drill installation. The aerodynamic, aluminum load bars adjust to easily fit your Tacoma and the T-slots in the bars will...
view full answer... - Ladder Rack For A 1996 Chevrolet C/K Series PickupI contacted Thule and they advised that the rack for you 1996 Chevrolet C/K Series Pickup you currently have is an older model from the 90's and unfortunately they no longer have any parts for it. Since there are no longer parts available for your current rack I recommend going with a new rack like the Erickson Truck Bed Ladder Rack w/ Load Stops Item # EM07705. It is a bolt on application and requires no welding or drilling, is an aluminum construction with an 800lb weight rating. It...
view full answer... - Could the Erickson Ladder Rack part # EM07705 Install with Bed Rail Cover BarsIf you have chrome bed rail covers that attach at the stake pockets of your 2013 Ford F-150 they most likely would interfere with the part # EM07705 from installing and would have to be removed. Even if you had the uprights of the rack installed in between the stake pockets the upright portion of the rack would still most likely hit the bars.
view full answer... - Ladder Rack Recommendations for a 2009 Nissan Frontier Crew Cab with Utili-Track System & Roof RackWith ladder rack # TH27000XT-EX for your 2009 Nissan Frontier the top of the crossbars are 26-1/4 inches above the tops of the bed sides. You can measure on your truck from the bed sides up 26-1/4 inches to determine how tall it will be relative to your factory roof rack. If your truck has the Utili-Track system then this ladder rack is not compatible unless that track system is removed. The Erickson ladder rack # EM07705 does have some hardware that will stick up above the tops of the...
view full answer... - What Ladder Rack do You Recommend for My 2021 Toyota Tundra with Deck Rails?I have a great ladder rack solution for you. Unfortunately, the Erickson Ladder Rack # EM07705 will not fit a 5-1/2 foot bed, 6-1/2 foot bed, or 8-foot bed with a deck rail system installed on your 2021 Toyota Tundra. With that being said, a great alternative is the Rhino-Rack Reconn-Deck Overland Truck Bed Rack - 220 Lbs - 59" Vortex Crossbars # RR96VH (for 6-1/2 foot and 8-foot beds) and the Thule TracRac SR Sliding Truck Bed Ladder Rack - 1,250 lbs # TH97RV.
view full answer... - Will Erickson Truck Bed Ladder Rack EM07705 Install Over Plastic Rail Caps on 1999 Ford F-150Erickson's Truck Bed Ladder Rack # EM07705 has an 800-lb load rating so a 24-foot extension ladder (about 55 to 65-lbs typically) will be no issue at all. It sounds like you have 1/4-inch plastic rail caps on your 1999 F-150. These should not pose any problem for installing this rack system. We often see folks using racks like this installed over rail caps.
view full answer... - Does DeeZee Offer a Invis-A-Rack Folding Ladder Rack for a 2023 Nissan Frontier? You will need the Erickson Truck Bed Ladder Rack # EM07705 for your 2022 Nissan Frontier. The Invis-A-Rack Folding Ladder Rack # DZ951600 will only fit full size trucks. DeeZee does not make an option for the compact pickups like your Frontier.
view full answer...
Do you have a question about this Ladder Rack?
Info for this part was:
Video by:
Joe V
Video by:
Zack K
Video by:
Andrew K
Video by:
Joshua S
Video by:
Jonathan Y
Video by:
Ethan H
Expert Research:
Mike L
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Adam R
Expert Research:
Jeffrey L
Edited by:
Tyler C
Video Edited:
Jacob T
Video Edited:
Dustin K
Video Edited:
Chris R
Test Fit:
Colin H
Test Fit:
Hayden R
Test Fit:
Jared G
Test Fit:
Ed W
Test Fit:
Jon G
Test Fit:
Aidan B
Test Fit:
Evangeline M
Updated by:
Mary K
Updated by:
Wilson B
Updated by:
Alex H
Written by:
Matthew S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Adam
6/23/2021
Love it. Ive kept a canoe and sometimes add a kayak. I even had a couch in the bed and one on the rack. So my only concern is rack thieves. These just bolt down and can be removed under 3 three minutes with a impact gun. If I head to the city they come off. The quick break down is nice if I need to take the truck to the car wash.