Coupler Pin - 1/4" Diameter x 1-3/4" Long
(7 reviews)
Price: $4.83
In Stock
Coupler Pin - 1/4" Diameter x 1-3/4" Long
Item # 37201221
Retail:$21.54
Our Price: $4.83
You Save: 78%
In Stock
- All Info
- Reviews (7)
- Q & A (0)
- Videos (2)
- Photos
JR Products Hitch Pins and Clips - 37201221
- Snapper Pin
- 1/4 Inch Diameter
- 1-3/4 Inch Long
- 1-3/4 Inch Span
- JR Products
Spring-tensioned, zinc-plated steel snapper pin prevents your trailer's coupler from unlatching and releasing from your hitch ball. Pin measures 1/4" diameter x 1-3/4" usable length.
Features:
- Snapper pin prevents your trailer's coupler from unlatching
- Spring-tensioned design creates a strong hold
- Zinc-plated steel is corrosion resistant
Specs:
- Pin diameter: 1/4"
- Usable length: 1-3/4"
01221 JR Products Safety Lock Pin - 1/4" Diameter x 1-3/4" Useable Length
Compare to Draw-Tite 63020
Video of Coupler Pin - 1/4" Diameter x 1-3/4" Long
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Video Transcript for Review of JR Products Hitch Pins and Clips - Snapper Pin - 37201221
Today, we're going to take a look at the 1 3/4" long coupler pin with the 1/4" diameter pin. Now this snapper pin will prevent your trailer's coupler from unlatching. Basically what you would do is unclip it, slide this 1/4" pin into the 1/4" diameter hole that's on your coupler and then clip it to hold it into place. That'll keep your latch from opening up. It is a spring tension design. So it creates a nice strong hole.
It is a zinc plated steel, which is corrosion resistant. Now the pin itself right here is 1/4" diameter. The usable length, which we'll measure, is going to be the inside of the cliff, so 1 3/4" and the opening height on the inside, it's right at 1 1/2". But that should do it for the review on the 1 3/4" long coupler pin with the 1/4" diameter pin.
Customer Reviews
Coupler Pin - 1/4" Diameter x 1-3/4" Long - 37201221
Average Customer Rating: 5.0 out of 5 stars (7 Customer Reviews)
Spring-tensioned, zinc-plated steel snapper pin prevents your trailer's coupler from unlatching and releasing from your hitch ball. Pin measures 1/4" diameter x 1-3/4" usable length.by: George 08/17/2023
What can I say. These are excellent pins. Unfortunately I seem to lose them much too often.
by: Greg05/20/2022
Simple and effective
by: Becky 04/09/2024
by: WB08/07/2023
by: Owen 02/22/2024
by: Jake 07/29/2021
by: Robert 03/14/2021
7
7
See what our Experts say about this JR Products Hitch Pins and Clips
Info for this part was:
Edited by:
Lindsey S
Installed by:
Jeff D
Installed by:
Chris R
Video Edited:
Joshua S
Video by:
Dustin K
Updated by:
Wilson B
Written by:
Mike S
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.