Curt Solid Steel 3" Hitch Bar with Raw Finish - 12" Long

Video Transcript for Review of CURT Hitch Fabrication Parts - Receiver Tube - C23NR

Hello everybody, this is Jeff at etrailer.com. Today I'm gonna take a look at this Curt 12-inch long solid steel, three inch hitch receiver tube in the raw finish. Now this Curt 12-inch long steel receiving tube can be used to extend the reach of your receiver or even to create a piece of custom towing equipment. It is constructed of a hot blown steel for superior strength. And what's nice if you look close, it's designed with rounded corners for greater versatility and it is designed to accept a three inch by three inch shank. Does have a nice half inch reinforcing collar all the way around the outside here for extra strength.

And this does come with a pre-drilled, five eight inch diameter hitch pin hole. You mention it's a raw finish so it's all ready to be welded. A few dimensions on this. So we're gonna start with the length. So if we go from one end to the other is 12 inches long.

The internal measurement of the, gonna be right at three inches and the height of three inches tall. And the last measurement is gonna be the measurement from the center of the hitch pin hole to the end of the shank. So if we go from the center right there to the end is two and a half inches. But that should do it for the review on this Curt 12-inch long solid steel three inch hitch receiver tube in the raw finish.