Outboard Reese Fifth Wheel Rail Kit Fit Confirmation for 2016 Ford F-350 Rail Location Dimension

Question

Question:

What kit will I need to install my husky 16k slider hitch. And were should the center be to axle. I have a 56016-53 I received from trailer .is this for a long bed truck

asked by: Boyd R

0

Expert Reply:

For your 2016 Ford F-350 short bed (or long bed) the Outboard Reese Rail Kit part # RP56016-53 that you have is listed as a fit. Since this is a custom fit, outboard kit it will be the easiest kit to install. The frame brackets being on the outside of the frame makes things much easier.

The center of the jaws of the hitch will end up approximate 7/8 of an inch in front of the rear axle center. From the rear edge of the truck bed to the rear edge of the rear rail will measure 27-5/8 inches.

expert reply by: Jameson C

0

click to enlarge

Answer 1

The distance between the rails should be center to center 22" (pictured below). This rail spacing is considered industry standard. I've attached the installation video for the custom fit B&W rails #BWRVK2401 to help you with…

view full answer...

Answer 2

When installing the Curt fifth wheel rail kit part #C16424-204 the distance from the rear truck bed edge to the rear of the fron rail is going to be 54-3/16 inches. You'll use the fifth wheel hitch to place the rear rail once you have the…

view full answer...

Answer 3

The Firestone Ride-Rite Air Helper Springs #F2550 in conjunction with the Reese Quick-Install Custom Brackets #RP50082 should be able to be installed without interference. The mounting brackets for the Firestone Ride-Rite #F2550 attach to inboard…

view full answer...

Answer 4

In regards to the Curt Custom Fifth Wheel Installation Kit part #C16400-204 which is a fit for a 2017 GMC Sierra 1500, the distance from the edge of the truck bed to the edge of the forward-most rail is 47-1/2" on both the 5-1/2' and…

view full answer...

Answer 5

Beds shorter than 8 foot do commonly need a slider hitch David, but a lot of modern fifth wheel trailers are now made with tapered noses to help and in a lot of cases a slider isn't required. So if the trailer you plan to tow has a tapered nose…

view full answer...

Answer 6

You can use the Curt E16 fifth wheel hitch part #C16115 in the bed of your 2018 Chevy Silverado with the OEM pucks but you would need to use the adapter part #C47BR which converts the pucks to the rail kit style this hitch needs.

view full answer...

Answer 7

Yes, you can remove the Shark Fin Camera Mounting Bracket #FRCBRKT-BL which includes the wiring from your 2024 Forest River Flagstaff Super Lite 26FKBS for a Voyager system. The Kit #ASA24YR you found is specifically designed for trailers pre-wired…

view full answer...

Answer 8

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 9

The B&W Companion OEM 5th Wheel Hitch w/ Slider for Chevy/GMC Towing Prep Package #BWRVK3775 you're looking at will work fine with your new Chevrolet Silverado. This hitch has 3 height adjustments so you'll be able to set the hitch height…

view full answer...

Answer 10

When a BAK Revolver like the part #BAK39331 is rolled up it's diameter is 8 inches. So it would add 8 inches to the height of your truck bed at the very front of your truck bed where it would then be 8 inches wide. The width of your trailer nose…

view full answer...

Answer 11

The Jayco Jayflight 2005 28FKS has a dry tongue weight of 1135 lbs. That is a lot for a 3/4 ton truck and will have you close to the payload. With the air bags you will be able to get rid of the sag in the suspension but I would certainly want sway…

view full answer...

Answer 12

When you install a fifth wheel rail kit like the custom kit part #RP50082-58 in the bed of your 2002 Ford Super Duty long bed the king pin center will be approximately 52-5/16 inches from the rear edge of the truck bed. The rear edge of the rear rail…

view full answer...

Outboard Reese Fifth Wheel Rail Kit Fit Confirmation for 2016 Ford F-350 Rail Location Dimension

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching