To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Customers prefer these similar products
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into OEM tow package port - no cutting, splicing or tapping required.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's factory tow package wiring harness, which is located in your rear cargo area. You will have to remove the cargo trays and rear threshold to access this harness.
Once installation is complete, the 4-way flat connector will be stowed in your rear cargo area, when not in use.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Hi everybody. Andy here with etrailer.com and today we're gonna take a brief look at this T-One vehicle wiring harness with a four pole flat trailer connector for a vehicle with a factory tow package. Now this harness is designed to fit the 2020 and newer Buick Encore GX with LED taillights and also the 2021 and newer Chevrolet Trailblazer. To confirm that this is gonna work for your vehicle, take advantage of our vehicle fit guide on our website. Input the year, make and model of your vehicle and our fit guide will let you know if this will work for your vehicle. So this is gonna give you a four way flat trailer connector at the back of your vehicle to power your trailer signal lights.
It is compatible with five pole, six pole and seven pole adapters, which are sold separately. And this harness is great because it's designed to connect quickly and easily by plugging directly into your OEM tow package port. So there's no cutting, no splicing or tapping required. There's not gonna be any alterations to your vehicle's wiring. It's literally plug and play.
Your OEM tow package port is located in the rear cargo area and you will have to remove the cargo trays and rear threshold to access this harness. You can secure any excess slack in your wiring with the included cable ties and once the installation is complete the four way flat connector will be stowed in your rear cargo area when not in use. As you can see, included with this is a dust cap for that four pole flat connector and it's tethered to the plug housing, so that is going to ensure that you don't misplace it or lose it. And that dust cap covers up those connection points when the plug is not being used, protecting connections from the elements, dirt and debris. The maximum amperage is gonna be 7.5 amps per circuit.
This is constructed of a 16 gauge bonded wire. Instructions are included. It is recommended that you use a small amount of dielectric grease on all of your electrical connections, like the plugs on the vehicle and the four pole connector itself. It's designed to help prevent electrical failures caused by corrosion and moisture. You can find that on our website using item number 11755 and if you decide to mount this near your trailer hitch receiver, and you would like to get a bracket to mount this in, I would recommend taking a look at our mounting bracket for four pole flat on our website.
You can find that using item number 18144. Well that's gonna conclude our look today. I hope it was helpful for you. Again, my name is Andy. Thank you for joining me..
Average Customer Rating: 4.8 out of 5 stars (15 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into OEM tow package port - no cutting, splicing or tapping required.The male end of the plug that this unit locks into is held to the body by a slide lock. Make sure you have a good grip on this connector when you push the female end in as to not push it out of the slide. Once the connectors are locked they will not move. This was for a 2023 Trailblazer with factory connector in spare tire area. Lift the cargo area cover and connector will be just left of center attached to the body just under plastic molding. Tested connector after install and light system working perfectly. Good price, solid product, do not hesitate to purchase if your vehicle has factory connector.
Fast delivery and perfect fit
James
3/28/2024
Still working like new
Haven’t installed it yet but it looks r ight
Plugs right in, no hastle, great communication on order status, low price- 5 stars easy
Not needed and shipping back was going to be over 50% of item cost. So I kept the unneeded part due to cost.
Excellent product, attached instantly
Easy install and works great.
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Raymond M.
5/5/2024
Unless you damage wiring or trailer plug you will not have any problems with this product.