T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
(62 reviews)
Price: $67.46
In Stock
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
Item # 118508
Retail:$112.03
Our Price: $67.46
You Save: 40%
Will this fit?
To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
In Stock
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
- All Info
- Reviews (62)
- Q & A (0)
- Photos
Tekonsha Custom Fit Vehicle Wiring - 118508
- Custom Fit
- Trailer Hitch Wiring
- 4 Flat
- Powered Converter
- Tekonsha
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
- Provides a 4-way flat trailer connector at the back of your vehicle to power your trailer's signal lights
- Compatible with 5-pole, 6-pole and 7-pole adapters (sold separately)
- Connects quickly and easily
- Locate connection points in trunk
- Plug in T-connector
- Run hot lead to car battery
- Includes ModuLite to ensure that your vehicle's wiring matches that of your trailer
- Powered module connects directly to battery to avoid overloading vehicle's electrical system
- Constructed of 16-gauge bonded wire
- Comes with dust cap for 4-way flat connector
Specs:
- Maximum amperage:
- Stop/turn lights: 2.1 amps per circuit
- Tail lights: 5.6 amps per circuit
- 1-Year limited warranty
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located inside your trunk, behind the tail lights on both the driver's side and passenger's side. You will need to remove some interior trim or carpeting to access the harness. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed within your trunk.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
ModuLite Powered Tail Light Converter
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
118508 Tow Ready T-1 T-Connector - 4 Wire - Modu-Lite
Installation Details
This Product Fits The Following Vehicles
- 2011 - 2013 Chevrolet Cruze
- 2011 - 2015 Chevrolet Cruze
- 2014 - 2015 Chevrolet Cruze Diesel models
- 2014 - 2015 Chevrolet Cruze excluding Diesel
- 2016 - 2016 Chevrolet Cruze Limited
- 2016 - 2016 Chevrolet Cruze Limited
California residents: click here
Customer Satisfaction Score:
95% were satisfied with this product
5% of customers were not satisfied
- Wrong item was ordered
- Defective
Customer Reviews
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector - 118508
Average Customer Rating: 4.9 out of 5 stars (62 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.by: Ben03/23/2020
2012 Chevy cruze wiring harness hooked up very easily shipping was extremely fast. Also ordered the Reese hitch. Exact fit. Thanks etrailer
by: Bob09/04/2019
Easy install. It's helpful to have two people to run power wire down the frame. other than that easy smeasy........ Thank you!
by: Nicholas 01/04/2024
It looks good, I haven't tried to install it.
by: Richard l03/20/2017
2015 Chevrolet Cruze
This has been a very good product. The installation was spot on with easy to follow instructions. If I could change one thing about the product it would be to make the 4 flat connector out of a softer rubber material that would make it easier to plug into
by: walter h05/24/2015
Chevy Cruze
Great service and Great product !! I ordered a wire harness for my chevy cruse and it was easy to install and fit perfect !! To be honest I thought it would be a little more difficult to install but it was easier, start to finish !! Thanks again !!
Walter H.
6/17/2016
The hitch works Great. As a matter of fact I need to order another hitch for my other car and when I do I will buy it from yall. Thank you again.
by: Dan C07/03/2020
A year later it still works... I threaded the power wire from the battery through the car cabin rather than under the car. I feel that the wire is less prone to damage. It was also much easier to do it that way on the diesel Cruze because of the body panels under the car....especially since I do not have a lift to work under.
Dan C.
7/6/2021
I have used it often and it works fine...
by: Neil S07/30/2014
Could not be better! Hitch and wiring kit were complete fit perfect and easy to install.
Neil S.
7/30/2015
Still perfect.
by: Shawn S.08/12/2019
The wiring harness attached very easily to the vehicle harness. Instructions are quite accurate about attaching to the vehicle. Time to expose the wiring and attach the harness was short (maybe 15 minutes). The only time-consuming part is threading the power line to a power source near the fuse block under the hood. That part took me maybe 45 minutes, trying to run it in protected locations that were still hidden. I'm not sure how necessary that is, as opposed to tapping into live power near the back of the vehicle, but I followed the instructions. It works perfectly, so I'm not upset about the time required.
by: Marc-andre Michaud11/12/2019
Be aware, I'm a demanding person! ;-)
Overall, working very fine! The little guide for installation was very appropriate. My first language is french and traduction was perfect, very rare... Important to get good crimp pliers to make good connexions (took some tries for me, good I had backup ones). Logs was a little bit to big for the place I prefered to connect on 12V + (but I had some of these too). To fix the relays module at the back of the car, I used an existing bolt available, but I searched a lot in my things to find good nut... That because I didn't want to make a new hole...
Suggestions for salers: add 2 wire-to-wire crimps, 5-6 tye-wraps, 2 logs crimps small and big as already given. I think it's good to paid 1-2 extra $ to prevent to get it somewhere...
by: Diesel Cruze04/14/2015
2013 Chevrolet Cruze
Took about an hour to install on a diesel Cruze.
As a shade tree home mechanic, I found feeding the hot wire to the battery took about double the time it would take on a non-diesel model because 1) the diesel has extra sound deadening material that makes it difficult to find secure locations for the wire and 2) the diesel does not come with a spare tire or, more importantly in this case, a jack.
I solved problem #1 by drilling a small hole in the insulation and taping the wire to a long dowel. I then fed the dowel and wire through the insulation. Problem #2 was solved by borrowing a jack. I would not attempt to feed the wire to the battery without removing the rear wheel as most of places I could reach with the wheel on were not suitable for the wiring; either because they were too close to the exhaust or attached to moving suspension parts.
Your results may vary, but without a car lift I found it much easier to feed the wire from front to back then from back to front as shown in the video. Feeding from front to back, it was easy to tape the wire to my dowel and push it down from the very back of the engine compartment (a very small clearance) to the ground. Had I been coming the other way I think hitting the quarter inch gap without the aid of gravity or the dowel would have been the source of much amusement to any onlookers counting bad words coming from my mouth.
Product was fine. If you have read your owner's manual you know you should not under any circumstances be using the diesel model as a tow vehicle anyway, so unless you like paying out of pocket for a fried turbocharger on your new $27,000 car you better be using those lights for your Christmas decorations! As for me, I think the car is good for the occasional trip to Lowes with a lightweight trailer, so I thank e-trailer for providing the accessories.
by: Steven09/18/2019
2012 Chevrolet Cruze
I choose to buy from etrailer a second time, I previously bought one for my 2002 Nissan Maxima and I had got hit with my trailer on, the hitch held up fantastic, I was very impressed that their product did not buckle, the the ball and male hitch took the damage and bent. I will install the wires and hitch soon for my Chevy Cruze, from the videos I have watched, it looks simple, the last one I installed was not bad to do so I am not worried about this one. Would recommend, anyone with basic mechanical knowledge will not struggle installing.
by: TRAV F11/27/2016
2013 Chevrolet Cruze
Extremely pleased with the plug and play design. The video online from eTrailer was the biggest help for this product as the directions were just a little too generic and not specific for the 2013 Chevy Cruze. The power cable was fairly easy to run under the car up to the battery for installation.
by: Mark 05/07/2021
Shipped quickly, was easy to install, and matched my car perfectly. Would purchase other wiring harnesses from etrailer again.
by: Dale N.10/16/2014
Well designed wiring package goes on easily and effectively. Video is helpful and shows exactly the proper installation technique. Only difficult part is running the wire under the car and up to the battery avoiding the exhaust and still keeping it secure from snow/ice in the winter. No hidden issues, wiring worked right the first time. Job well done, took about an hour start to finnish and no special tools involved. Thanks for making a difficult task so easy!
by: Timothy02/15/2019
2016 Chevrolet Cruze
I just got done installing this on my 2016 Chevy Cruze Limited. It was a fairly easy install, I just followed along with the video. I just backed my car onto ramps to run the power wire. The only thing I did different was I ran the wire from the battery to the trunk instead of trunk to battery. I used a tester and everything worked as should.
by: Dallas T.04/03/2020
Great product, easy installation, several thousand miles pulling a trailer with this hitch and not one issue.
by: Wayne R09/08/2016
2015 Chevrolet Cruze
Package arrived in excellent condition and in a timely manner . Very professional and great to work with. The hitch was in great condition and I'll be installing the hitch and harness tomorrow .
by: Keith Z08/29/2020
It was easy to install. Works great! low, reasonable cost. Reliable. It has been used very often due to having frequent needs to pull a small trailer.
by: Kurt09/26/2015
2014 Chevrolet Cruze
Installed this on my 2014 Chevy Cruze diesel. It took a little bit longer to install than anticipated due to the need to run the power line to the battery. The rest of the install was plug and play. I viewed the install video prior to my attempt. The video definitely made it easier to figure out how to get panels off. Am currently using it on a long (>3000 mile) trip and so far is working like a champ.
by: Cody06/06/2019
Very easy. Only had a slight issue Getting the yellow connectors clamped down enough. Used electrical tape to ensure they don’t come out. Start to finish, maybe took an hour. Etrailer also got it to me very fast.
by: Gary 05/25/2021
Works great, easy installation. Now I can tow my teardrop camper and boat with the car that gets better fuel mileage.
by: Diego M.11/10/2014
2013 Chevrolet Cruze
The wires works good, I'm not a mechanic so I'm not the best is cars but I put then myself according to the videos on this wedsite.
I search other places for this product and a cheap price but I only find it here, thanks etrailer for this priduct I'm very satisfy.
by: Rick R.07/08/2015
2014 Chevrolet Cruze
great product. hardest part was finding a spot to run wire through fire wall without drilling. Installed in a 2014 Chevy Cruze to pull a small utility trailer.
by: Dangerzone12/30/2014
The connections in the trunk were easy. Getting the one wire from the trunk to the battery was an entirely different story. But I was finally able to find a route without the wire being exposed or tearing up the interior of the vehicle.
by: Kendall05/14/2019
Fit like a glove. Very easy install no drilling required. Wiring harness was a breeze to install as well. Highky recommend!
25
62
Show More Reviews
See what our Experts say about this Tekonsha Custom Fit Vehicle Wiring
- Will the T-One Vehicle Wiring Harness 118508 for a 2015 Chevrolet Cruze Work With LED Trailer LightsYes, the T-One Vehicle Wiring Harness part # 118508 which is a fit for your 2015 Chevrolet Cruze will work with LED trailer lights. Generally speaking, most aftermarket trailer wiring harnesses like the above will work just fine with LED trailer lights.
view full answer... - Trailer Hitch and Wiring for a 2014 Chevy Cruze Diesel Towing a Seadoo Spark PWCFor your 2014 Chevy Cruze diesel I recommend Draw-Tite trailer hitch # 24882. This is a Class I hitch with a 1-1/4 inch receiver. I have linked a video showing an example installation for you. You can also see how much of the hitch is visible in the video. For a ball mount use # 3593. It comes with a pin and clip. For a 1-7/8 inch ball use # 19257. Or if the trailer requires a 2 inch ball use # 19258. And for trailer wiring you can use # 118508 to add a 4-Way flat connector to the rear...
view full answer... - Warranty Implications of Installing Receiver Hitch on 2011 Chevy CruzeInstalling a hitch on your 2011 Cruze will not have any warranty implications if the hitch is installed as outlined in the instructions and used within the weight bearing capabilities of the vehicle. Consumers of aftermarket products are protected by the Federal Magnusson-Moss Warranty Act. The Act states that if something breaks on your vehicle and you take it in for warranty repair, the dealer must honor your warranty unless whatever modifications you have added to your vehicle actually...
view full answer... - Recommended Trailer Hitch and Wiring for 2015 Chevy CruzeI took a look at the owner's manual for a 2015 Chevy Cruze and it was ambiguous concerning if your vehicle can tow a trailer. On one page it has tips for towing a trailer; on another page it says "The vehicle is neither designed nor intended to tow a trailer." Immediately after that it explains that the maximum a trailer should be is 1,000 lbs but possibly less depending on things like if you are going up steep hills. The owner's manual also states you will need to locate the statement...
view full answer...
- Trailer Hitch and Trailer Wiring for a 2011 Chevy Cruze to Tow a Jet SkiThe Draw-Tite Trailer Hitch, # 24882, will bolt to the bottom of your 2011 Chevy Cruze using factory holes in the frame rails. While there is no drilling needed, you might need to enlarge an existing access hole in order to fish the hardware through to bolt on the hitch. I have included a link to the installation instructions for the hitch for you to view. The hitch does not com with a ball mount. You will need # 3593. You will also need a ball and trailer wiring to complete the towing...
view full answer... - Recommendation for Small Trailer to Haul Furniture with 2014 Chevy CruzeA small utility trailer like the K2 Mighty Multi A-Frame # K2MMT5X7 that we offer would be a great choice for you. The trailer weighs around 450 bs, which would leave lots of capacity available for cargo. The trailer is extremely versatile, with removable sides and a folding front and rear tailgate for tons of carrying options. The Curt # C11282 hitch you'd looked at would work perfectly, and for a wiring harness I'd recommend # 118508.
view full answer... - Will Draw-Tite Hitch # 24882 Fit a 2011 Chevy Cruze 2LT with RS PackageThe Draw-Tite Sportframe Trailer Hitch, part # 24882, will fit all models of 2011 Chevy Cruze, so it will work on your 2011 Chevy Cruze 2LT with RS package. I attached installation instructions for you to check out also. If you plan on doing some towing you may also be interested in the following: Tow Ready Custom Fit Vehicle Wiring, part # 118508 (instructions attached) Hitch Ball with 2 inch Diameter and Short Shank, part # 19258 Hitch Ball with 1-7/8 inch Diameter and Short Shank,...
view full answer... - How Does the Draw-Tite # 24882 Mount to a 2011 Chevy CruzeThis Draw-Tite Trailer Hitch, part # 24882, will bolt to the rear portion of the frame on your 2011 Chevy Cruze. I attached installation instructions for you to check out. If you plan on doing some light towing I would recommend the following products to complete your towing setup: A ball mount Tow Ready Custom Fit Vehicle Wiring, part # 118508 (installation instructions attached) Hitch Ball with 2 inch Diameter and Short Shank, part # 19258 Hitch Ball with 1-7/8 inch Diameter and Short...
view full answer... - How to Access Tail Light Wiring to Install Trailer Wiring Harness on a 2014 Chevy CruzeTo access the tail light wiring on your 2014 Chevy Cruze sedan you will need to remove the rear most floor panel in the trunk, and some side panels. Take a look at the video I linked for wiring harness # 118508 which also fits your Cruze. It shows the process for accessing the tail light wiring.
view full answer... - Trailer Hitch Recommendation for 2014 Chevy Cruze DieselFor a trailer hitch that is confirmed as a fit for your 2014 Chevy Cruze diesel we have the Draw Tite part # 24882. I prefer the Draw Tite hitches over the Curt hitches as they do not require a stabilizer strap when carrying a non-supported load like a bike rack. For wiring I recommend the Tekonsha kit part # 118508 as we have found that the Tekonsha brand harnesses are more reliable than the others. For a ball mount you would want the # 3593 and then for a 2 inch hitch ball part # 19258...
view full answer... - Is a Power Wire Needed to Add Trailer Wiring on a 2012 Chevy CruzTow Ready has determined that the 2012 Chevy Cruz has a wiring system that requires a powered converter, # 118508. The power wire that connects to the battery provides the power to the trailer lights. This protects the vehicles sensitive wiring and electrical system from damage. The Cruz also uses a 3 wire system and most trailers use a 2 wire system. That is why a converter is needed. The vehicle has separate turn signals and brake lights, a trailer has combined turn signals and brake...
view full answer... - Curt Trailer Hitch Receiver That Fits 2016 Chevy Cruze LimitedI checked with the manufacturer, and can verify that the only Curt trailer hitch receiver that fits your 2016 Chevy Cruze Limited is the Curt Trailer Hitch Receiver # C11425. The other option you were referring to is actually not a fit for the Limited, it is only a fit for the standard Cruze. I have added a link to the instructions as well as a video install for you to check out. If you plan on doing some light towing with your 2016 Cruze Limited, you'll need some other parts, which I'll...
view full answer... - Is Hopkins Tail Light Converter 46255 Compatible With LED Trailer Lights for 2014 Chevy CruzeYes, the Hopkins Active Tail Light Converter with Install Kit # 46255 is compatible with LED trailer lights, though to add a 4-way to your 2014 Chevy Cruze I highly recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118508 because it is designed specifically to fit your Cruze, and requires only that you plug it into connection points in your Chevy's tail light harness and run a hot lead to your battery. I have added a link to a video install of this harness...
view full answer... - What is Needed for a 5-Way Flat on Tow Vehicle to Connect to 4-Way Flat on TrailerTypically when a 5-Way connector is on a vehicle, like your 2011 Chevy Cruze, it carries the reverse light circuit. Since this isn't usually needed for towing a trailer you should just be able to plug the 4-Way connector from your trailer into the 5-Way on your Cruze. In the case that the 5th pin is for the brake lights you can simply install the Roadmaster Converter # RM-732 to combine your brake and turn signals and retain your 5-Way connector. You can use a circuit tester like part...
view full answer...
- Recommended Trailer Hitch For 2014 Chevrolet Cruze LTZ With RS Package The Draw-Tite Sportframe Trailer Hitch Receiver, part # 24882, is a confirmed fit for your 2014 Chevrolet Cruze LTZ with the RS package. This is a Class l hitch and it has a 1-1/4 inch receiver opening. I have attached a drawing that shows the hitch receiver along with the fascia. Because of the lower back bumper on the LTZ, you will need a drawbar with a rise to accommodate an accessory like a bike rack or a cargo carrier. If you plan on towing a small trailer with your Cruze, I recommend...
view full answer... - Difference Between Hidden Hitch and Draw Tite Hitch for a 2014 Chevy CruzeThere really aren't any differences between the Draw Tite Hitch part # 24882 and the Hidden Hitch part # 60299 (no longer available). They are both made by the same company and are virtually identical minus a few decals. The Hidden Hitch does come with a ball mount and a pin and clip so that may affect your decision. For a hitch ball you would want the part # 19258 for a 2 inch ball or part # 19256 for a 1-7/8 inch ball. For trailer wiring you would then want the part # 118508.
view full answer... - Recommended Trailer Hitch and Wiring for 2016 Chevrolet Cruze Limited Old Body StyleThe trailer hitch I recommend for a 2016 Chevrolet Cruze Limited (Old Body Style) is the Draw-Tite Sportframe Trailer Hitch Receiver part # 24882. It's an excellent bolt-on option. It can then be used with the T-One Vehicle Wiring Harness part # 118508 for towing. That said, you'll also need the Draw-Tite Drawbar part # 3593 along with a hitch ball to complete your setup. I recommend the part # 19256 for 1-7/8" or part # 19258 for 2".
view full answer... - Towing Capacity and Parts Needed to Tow with 2015 Chevy Cruze DieselThe best source for this type of information is going to be your vehicle's owners manual, especially since there is some conflicting information. From what I was able to find, the 2015 Chevy Cruze Diesel has a towing capacity of up to 1000-lbs, which may or may not be enough to tow a small camper. You can find out the dry weight of your camper by checking the spec sticker, which should be located somewhere on the trailer tongue or the body of the camper. I would also recommend consulting...
view full answer... - Trailer Hitch and Wiring Recommendation for 2015 Chevy CruzeSince there are only Class I 1-1/4 inch trailer hitches that are a fit for your 2015 Chevy Cruze like the Draw Tite part # 24882 which have very low capacities your best option will be a small trailer as none of the options we offer will be rated for a carrier and the weight of a power wheel chair. This hitch only has a 200 lb tongue weight capacity. For trailer wiring you'd then want the Tekonsha kit part # 118508 which is a confirmed fit as well. For a ball mount you'd want the part...
view full answer... - Routing Power Wire for Trailer Wiring Harness on a 2012 Chevy CruzeThe power wire for harness # 118508 can't connect to the fuse box. It has to go to the battery on your 2012 Chevy Cruze. You can route the wire to the battery any way you want. Along the frame, through the frame, through the interior of the vehicle. It depends on what you want to do. There are other wiring harnesses under the vehicle that you would secure the power wire to. So its not like it is just hanging there. And of course you would want to avoid exhaust and suspension parts; anything...
view full answer... - Trailer Hitch and Wiring for a 2012 Chevrolet CruzeFor the 2012 Chevrolet Cruze, the CURT Trailer Hitch, # C11282, is verified to fit. If you will be carrying bikes with this hitch on your Cruze, the Thule Vertex 2 Bike Carrier, # TH9028, is a popular 2 bike rack option. If you will be towing with your Cruze, I have listed some items you may need to complete your Class 1 towing setup. 1-7/8 inch hitch ball, # 19256, or 2 inch hitch ball, #19258 Trailer Wiring Harness, # 118058 etrailer.com Ball Mount Bag, # ETBMB Hitch Lock, # 5200
view full answer... - Trailer Hitch and Wiring Recommendation for a 2016 Chevy CruzeThe Curt trailer hitch # C11282 is rated for 2,000 pounds gross trailer weight and 200 pounds tongue weight. Your 2016 Chevy Cruze is rated for a maximum of 1,000 pounds according to the owner's manual. this will limit the hitch to 1,000 pounds. The hitch does fit the 2016 Cruze. The correct ball mount for this hitch and vehicle is # C45522. For a 1-7/8 inch ball use # 19256 and for a 2 inch ball use # 19258. And for trailer wiring use # 118508 to add a 4-Way flat connector to the rear...
view full answer... - Can a Dirt Bike be Carried on Trailer Hitch on a 2014 Chevy CruzeAll of the trailer hitches available for your 2014 Chevy Cruze, including # 24882, are Class I hitches which have a tongue weight capacity of 200 pounds maximum. This is the first hurdle because the combined weight of the dirt bike and the carrier would have to be under 200 pounds. The second hurdle is that carriers designed to carry motorcycles will not fit in Class I hitches. So the cargo carriers that do fit Class I hitches may not be long enough for the bike. I recommend # C18110 since...
view full answer... - Can Trailer Hitch for a 2001 Ford Windstar Fit a 2011 Chevy CruzeThe hitch companies custom design the hitch so it fits a certain year make and model vehicle. In some instances, the same part number hitch will fit numerous model years of the same vehicle, with the hitches for the Honda Odyssey being an example. This being said, a hitch designed for a 2001 Ford Windstar would not fit a 2011 Chevy Cruze. We offer a hitch that's custom designed for the Cruze. If you're needing the hitch as an attachment point for a bike rack, I'd recommend the Draw-Tite...
view full answer...
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
Test Fit:
Joe V
Test Fit:
David F
Expert Research:
Michael H
Expert Research:
Jameson C
Expert Research:
Rachael H
Video Edited:
Joshua S
Video Edited:
Sue W
Video Edited:
Chris R
Updated by:
Laura H
Updated by:
Wilson B
Updated by:
Alexander C
Updated by:
Isabelle B
Installed by:
Cole B
Video by:
Schuyler H
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Product Experts Available Now!
Call 1-800-940-8924
Richard L.
3/20/2018
Still working very well, If I need another in the future I’ll get the same one.