To see if this custom-fit item will work for you please tell us what vehicle you'll use it with.
Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Quickly and easily install a 4-way trailer connector on your Nissan Juke with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.
Features:
Specs:
Installation
This custom-fit T-One connector plugs into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your rear cargo area. Once you've plugged in the T-connector, run the hot lead up to your car battery. Connect the lead to the included fuse holder, and then connect the fuse holder to the positive terminal on your battery and insert the provided fuse.
Once installation is complete, the 4-way flat connector will be stowed in an out-of-the-way location within your cargo area.
It is recommended that you use a small amount of grease on all electrical connections - the plugs on your automobile and the 4-pole connector itself - to help prevent corrosion.
A ModuLite power module is built into this T-One connector. Because most trailers run on a two-wire system - wherein the brake and turn signals are carried on one wire - the separate brake and turn signals from your vehicle's three-wire system need to be combined so they are compatible with the wiring system of your trailer. This power module functions as a tail light converter to combine the brake and turn signal functions of your automobile so that they run on one wire to properly activate your trailer's tail lights. Note: This will not affect how the tail lights on your vehicle operate.
With a ModuLite, your trailer's lights will be powered without overloading your vehicle's electrical system. Because the module draws power directly from your car's battery and bypasses the electrical routes that are used by a basic wiring harness, there is virtually no draw on your tail light circuits.
California residents: click here
Average Customer Rating: 4.6 out of 5 stars (16 Customer Reviews)
Quickly and easily install a 4-way trailer connector on your vehicle with this custom wiring harness. T-One connector plugs directly into existing wiring. Powered ModuLite reduces strain on wiring system.installed on 2014 Nissan juke. I like the fact it has its own power supply instead of feeding off the factory brake line power. So I started off by popping off the rear plastic cover. For this, I used a small 7-inch mini pry bar and 2 flat head screwdrivers. i also used a soldering gun instead of the little yellow connection pieces. I ran my power wire through the inside of the car along the driver side. underneath the plastic floor kicker panels. The hard part is getting the wire through the rubber grommet just above the brake pedal. I used a sturdy wire (really sturdy) used Ducktape to attach the wire and shoved it through the grommet , make sure not to damage any fatory wirring or you might be in big trouble. ( this took me awhile)
then I soldered all my connection (wish the fuse holder was black so it looks more factory). I also followed some of the factory wiring and taped the yellow fuse holder and yellow around them with eletrical tap.
Matthew
3/12/2017
Everything is still working great. I use the trailer hitch very often usually pulling a small trailer or popup camper. Very satisfied with my purchase and customer service. thanks for the email *
Timely shipping, fits my 2014 juke perfectly. Yet to try it out on trailer. If I don't update review then all goes well!
This is my second trailer hitch and and wiring harness from e-trailer. As in the past the service was great, price was excellent and the product was as described with great instructions.Should I get another vehicle without a hitch I most certainly will get it from e-trailer.
Jay D.
4/15/2015
Its been a year and my attitude for e-trailer has not changed. Great prices and service and productsa that are as described. I just ordered a bike rack from them and expect no less. Super people
Bought this after the Curt harness wouldn't work. This one worked first time no problem. While more work to run power directly from the battery it really is better. Would have been nice if the gave waterproof electrical connections though.
John S.
11/4/2013
Mark S- was this because the Curt harness wouldnt support the brake lights on the trailer?
Just installed this on our 2013 Juke Nismo AWD.
Product installation was fairly straight forward. Removing the rear threshold required really using some force to get the clips to release from the frame, but nothing broke. The rear side panels pull away much more easily than the rear threshold panel, and do not need to be fully removed to access the brake light harnesses.
I chose to run the power wire under the car and through the gromet located under the spare tire. Everything worked without any issues when I picked up a u-haul trailer to deliver a motorcycle.
My only complaint about this, throw away the splices and the eyelit. Then purchase ones with real heat shrink on them and not some garbage plastic shrouds. People that run wires/solder wires know to always use heat shrink when splicing together electrical connections. Better yet; slide heat shrink to one side of your splice, solder your wires directly, and then slide the heat shrink over and heat it.
Installed wiring, had a couple questions called and received the answers i needed, the wiring for the trailer has been working great!
Installed and works good.
The only problem I had with it, was the driver side plug to the module is really short, making it hard to mount the module anywhere due to the bass speaker being in the way, it just needed like 4" longer wire to get below the side panel trim.
Great product, pretty easy install. Quick connect harness makes wiring mistakes practically impossible. I can now tow my waverunner and jonboat with my Juke, awesome!
Easy hook-up and reliable. Never had any issues.
+Install was fairly straightforward, due to excellent instructions.
easy to install, clear directions and performs as it's supposed to. No problems. I would recommend to others. Thank you.
Package arrived in good time and in excellent condition.
Product was also medium easy to self-install.
Great shipping
Do you have a question about this Custom Fit Vehicle Wiring?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Matthew B.
2/16/2017
Working great i would like to update to 5 stars it has been working that well